1. Introduction
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Intex Rechargeable Handheld Pool Vacuum Cleaner and PureSpa Plus 4-Person Bubble Massage Inflatable Hot Tub. Please read all instructions carefully before use and retain this manual for future reference.
2. Safety Information
General Safety Warnings:
- Always supervise children when they are near the hot tub or pool vacuum.
- Do not operate the hot tub or pool vacuum if any part is damaged.
- Ensure all electrical connections are dry and protected from water.
- Read and follow all warnings and instructions provided with each product.
Hot Tub Specific Warnings:
- Do not exceed the recommended water temperature of 104°F (40°C).
- Pregnant women, individuals with heart disease, high blood pressure, diabetes, or other health conditions should consult a physician before using the hot tub.
- Avoid using the hot tub immediately after strenuous exercise.
- Never operate the hot tub without proper water treatment and filtration.
Pool Vacuum Specific Warnings:
- Do not use the vacuum while the hot tub or pool is occupied.
- Ensure the charging port is completely dry before connecting the charger.
- Only use the charger supplied by the manufacturer.
3. Package Contents
Verify that all components are present and undamaged:
- Intex Rechargeable Handheld Pool Vacuum Cleaner
- Two (2) interchangeable brush heads for the vacuum
- PureSpa Plus 4-Person Bubble Massage Inflatable Hot Tub (Greywood design)
- Spa control unit with wireless touch display
- Insulated spa cover
- Spa filter cartridges
- Inflation hose
- Storage bag
- Repair patch kit
- User Manuals for both products
4. Setup
4.1 PureSpa Plus Hot Tub Setup
- Site Selection: Choose a flat, level surface capable of supporting the weight of the filled hot tub (approximately 210 gallons / 795 liters of water plus occupants). Ensure adequate drainage.
- Unpacking: Carefully remove the hot tub and accessories from the packaging.
- Inflation: Connect the inflation hose to the spa control unit and the hot tub's inflation valve. Use the spa control unit to inflate the hot tub until it is firm to the touch, but not over-inflated.
- Control Unit Connection: Connect the spa control unit to the hot tub. Ensure all connections are secure.
- Filter Installation: Install the filter cartridges into the filter housing inside the hot tub.
- Water Filling: Fill the hot tub with fresh water to the recommended level, indicated on the inner wall of the spa.
- Initial Heating: Plug in the spa control unit and turn on the heater. Set your desired temperature using the control panel or the Intex smartphone app.
Image: Intex PureSpa Plus Greywood Deluxe Inflatable Hot Tub. This image shows the fully inflated hot tub with its control unit attached, ready for use.
Image: Intex PureSpa Plus Greywood Deluxe Hot Tub Dimensions. A person is seated on the edge of the hot tub, illustrating its size and dimensions for both 4-person and 6-person models.
4.2 Handheld Pool Vacuum Setup
- Charging: Before first use, fully charge the vacuum's built-in Ni-MH rechargeable batteries. Connect the charger to the vacuum and a power outlet. The charging indicator will show when charging is complete.
- Assembly: Attach the desired brush head (either the standard brush or the wider brush) to the vacuum head. Securely attach the telescopic pole to the vacuum body.
Image: Intex Rechargeable Handheld Pool Vacuum. The image displays the assembled handheld pool vacuum with its telescopic pole and one of the brush heads attached.
5. Operating Instructions
5.1 PureSpa Plus Hot Tub Operation
- Power On/Off: Use the power button on the wireless control panel to turn the spa on or off.
- Temperature Control: Adjust the water temperature using the up/down arrows on the control panel. The desired temperature will be displayed.
- Bubble Jets: Press the bubble button to activate the 140 high-powered bubble jets for a relaxing massage. Press again to turn off.
- Filtration: The filtration system operates automatically to keep the water clean. Ensure filter cartridges are clean for optimal performance.
- Smartphone App: Download the Intex smartphone app to control heating, filtration, and sanitation schedules remotely.
Image: Intex PureSpa Plus Wireless Control Panel. This image shows the digital display and buttons of the wireless control panel, used for managing spa functions like temperature and bubble jets.
Image: Intex Spa Management App Interface. Two smartphone screens display the Intex Link Spa Management App, showing temperature control and scheduling options.
5.2 Handheld Pool Vacuum Operation
- Activation: Submerge the vacuum head into the water. The vacuum is designed with an automatic shutoff feature that prevents operation when not submerged.
- Cleaning: Guide the vacuum along the bottom and sides of your pool or hot tub to collect debris. The powerful suction will draw in dirt and particles.
- IPX8 Waterproof Switch: The vacuum features an IPX8 waterproof switch for safe operation in water.
Image: Person using Intex Handheld Pool Vacuum. A person is shown using the handheld vacuum to clean the bottom of an above-ground pool, demonstrating its reach and ease of use.
6. Maintenance
6.1 PureSpa Plus Hot Tub Maintenance
- Filter Cartridge Cleaning/Replacement: Regularly remove and clean the filter cartridges. Replace them every 2-4 weeks, or as needed, depending on usage.
- Water Treatment: Maintain proper water chemistry using appropriate spa chemicals. Test water regularly and adjust pH, alkalinity, and sanitizer levels. The built-in hard water treatment system helps soften water.
- Draining and Cleaning: Periodically drain the hot tub and clean the interior surfaces with a soft cloth and mild cleaner. Rinse thoroughly before refilling.
- Spa Cover: Always use the energy-efficient spa cover when the hot tub is not in use to retain heat and keep debris out.
Image: Intex PureSpa Plus Energy-Efficient Spa Cover. A cutaway diagram illustrates the thermal insulation properties of the spa cover, showing how it helps retain heat.
6.2 Handheld Pool Vacuum Maintenance
- Filter Bag Cleaning: After each use, remove and empty the debris collection bag. Rinse it thoroughly with clean water.
- Brush Head Cleaning: Clean any debris or hair from the brush heads to ensure effective cleaning.
- Storage: Store the vacuum in a dry, cool place away from direct sunlight when not in use.
Image: Person holding Intex Handheld Pool Vacuum head. A person is shown holding the vacuum head, demonstrating its compact size and the ease of detaching it for cleaning.
7. Troubleshooting
Hot Tub Issues:
- Spa not heating: Check power connection, ensure filter is clean, and verify temperature settings.
- Low water flow/bubbles: Clean or replace filter cartridges. Ensure water level is adequate.
- Error codes on display: Refer to the specific PureSpa manual for a list of error codes and their solutions.
Pool Vacuum Issues:
- No suction: Check if the debris bag is full or clogged. Ensure the vacuum head is fully submerged.
- Vacuum not turning on: Ensure batteries are fully charged. Check for any obstructions in the motor area.
- Short operating time: Batteries may need to be fully recharged or may be nearing the end of their lifespan.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Intex |
| Hot Tub Model | PureSpa Plus Greywood Deluxe |
| Hot Tub Dimensions (L x W x H) | 77"L x 77"W x 28"H |
| Hot Tub Material | Puncture-proof 3-ply laminated material, Fiber-Tech construction |
| Hot Tub Shape | Round |
| Hot Tub Capacity | 210 Gallons |
| Hot Tub Seating Capacity | 4 Persons |
| Number of Bubble Jets | 140 |
| Hot Tub Temperature Range | 50°F - 104°F (10°C - 40°C) |
| Pool Vacuum Type | Rechargeable Handheld Above Ground Pool Vacuum |
| Pool Vacuum Battery | Built-in Ni-MH rechargeable batteries |
| Pool Vacuum Safety Feature | Automatic shutoff when not submerged, IPX8 waterproof switch |
Image: Intex PureSpa Plus Hot Tub Specifications. This graphic visually represents key specifications such as capacity, bubble jets, temperature range, and water capacity for the hot tub.
9. Warranty Information
Intex products are manufactured with high-quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. Intex warrants this product against defects in materials and workmanship for a period of one (1) year from the date of retail purchase. This warranty does not cover defects resulting from negligence, misuse, accident, improper operation, lack of maintenance, or acts of nature. For specific warranty details and claims, please refer to the warranty card included with your product or visit the official Intex website.
10. Customer Support
For further assistance, troubleshooting, or to order replacement parts, please contact Intex Customer Service. You can find contact information on the official Intex website or in the documentation included with your product. Please have your product model number and purchase date available when contacting support.
Online Resources: Visit www.intexcorp.com for FAQs, product registration, and additional support materials.
