How do I fix my MAXUS P029 scale? I followed the manual for calibration, but I am stuck at step 1 and it did not show the 20kg scale after pressing the 'M' button.

Based on the MAXUS P029 manual, the standard calibration procedure is not explicitly detailed in the basic user guide, which typically refers users to contact support for specific calibration guidance. However, if you are stuck in a calibration mode where the display is not advancing to the required weight (such as 20kg) after pressing the MODE (M) button, please try the following steps:Check Power Stability: Ensure the scale is powered by fresh AAA batteries or a stable Type-C power connection. Low power can cause the processor to hang during calibration routines.Surface Check: Ensure the scale is on a completely flat, stable, and vibration-free surface. Any movement during the initial calibration phase can prevent the scale from moving to the next step.Button Sequence: Typically, for MAXUS scales, you must press and hold the MODE (M) button while the scale is powering on to enter calibration, then press MODE (M) again to select the calibration weight. If it is not cycling to "20.00" (kg), the scale may not be registering the button press or may be locked.Reset the Scale: Power the scale off, remove the batteries/unplug the Type-C cable for 30 seconds, and then try the process again.If the display remains stuck on "1" or fails to show the 20kg requirement after these steps, the internal sensor or firmware may be faulty. You should contact MAXUS Customer Support as recommended in the manual's troubleshooting section for specific calibration codes or warranty assistance.

MAXUS P029

MAXUS P029 Digital Shipping Scale User Manual

Model: P029

Introduction

This manual provides detailed instructions for the proper use and maintenance of your MAXUS P029 Digital Shipping Scale. Designed for precise measurements, this scale is suitable for various applications including postal services, warehouses, markets, and home use. It offers a measuring range accuracy of 440LB/10g (200kg/10g) and a minimum starting point of 150g.

Key features include:

Accurate Measurements: 440LB/10g (200kg/10g) capacity with a minimum starting weight of 150g.
Versatile Usage: Adaptable for postal, warehouse, market, and home environments.
Compact Design: Portable and easy to use in various locations.
Convenient Functions: Includes Hold and Tare functions for enhanced usability.
Stability: Equipped with four-corner sensors for reliable weighing.

1. Setup

1.1 Unpacking and Component Check

Carefully remove all components from the packaging. Ensure the following items are present:

MAXUS P029 Scale Platform
Digital Display Unit with coiled cable
AAA Batteries (if included)
Type-C Power Cable (if included)
User Manual (this document)

1.2 Power Supply Installation

The scale can be powered by two AAA batteries or a Type-C power supply.

MAXUS P029 Scale with battery compartment and Type-C port labeled

Image: Rear view of the digital display unit showing the battery compartment and Type-C power supply port.

Battery Installation: Open the battery compartment on the back of the digital display unit. Insert two AAA batteries, ensuring correct polarity (+/-). Close the compartment cover.
Type-C Power Supply: Alternatively, connect the Type-C power cable to the port on the side of the digital display unit and plug the other end into a suitable power source.

1.3 Connecting the Display Unit to the Platform

The digital display unit is connected to the weighing platform via a coiled cable. Ensure the cable is securely plugged into both the display unit and the platform.

Underside view of MAXUS P029 scale platform with coiled cable

Image: Underside of the scale platform showing the coiled cable connection to the display unit.

The display unit can be placed on a flat surface or mounted on a wall using the back nail slot.

MAXUS P029 Digital Display Unit with labeled buttons and back nail slot

Image: Front and rear view of the digital display unit, highlighting the back nail slot for mounting.

2. Operating Instructions

2.1 Powering On/Off

Press the POWER button ( Power button icon ) to turn the scale on or off. The display will show "0.00" when ready for use.

2.2 Unit Conversion (MODE)

Press the MODE button (M) to cycle through available weighing units: kilograms (kg), pounds (lb), and pounds:ounces (lb:oz).

MAXUS P029 scale platform with dimensions and unit conversion options

Image: Scale platform dimensions and visual representation of unit conversion options (kg, lb, lb:oz).

2.3 Tare Function

The Tare function allows you to subtract the weight of a container, so you can measure only the contents. This is useful for weighing items in bowls or boxes.

Place the empty container on the weighing platform. The display will show its weight.
Press the TARE button (T). The display will reset to "0.00".
Place the items to be weighed inside the container. The display will now show only the net weight of the items.

MAXUS P029 scale demonstrating Tare function with a basket and fruit

Image: Visual guide for using the Tare function, showing an empty basket being tared, then fruit added for net weight measurement.

2.4 Hold Function

The Hold function freezes the displayed weight, allowing you to easily read it even after removing the item from the scale.

Place the item to be weighed on the platform.
Once the weight stabilizes, press the HOLD button. The displayed weight will be locked.
You can now remove the item, and the weight will remain on the display until the HOLD button is pressed again or the scale is turned off.

MAXUS P029 scale demonstrating Hold function with a package

Image: Illustration of the Hold function, showing a package being weighed and the weight being frozen on the display.

3. Maintenance

3.1 Cleaning

To maintain accuracy and prolong the life of your scale, keep it clean and dry.

Wipe the scale platform and display unit with a soft, damp cloth.
Do not use abrasive cleaners or immerse the scale in water.
Ensure no liquids enter the display unit or battery compartment.

3.2 Storage

Store the scale in a cool, dry place away from extreme temperatures and humidity. If storing for an extended period, remove the batteries to prevent leakage.

4. Troubleshooting

Problem	Possible Cause	Solution
Scale does not turn on.	Low or dead batteries; power cable not connected.	Replace batteries or ensure Type-C power cable is securely connected.
Inaccurate readings.	Scale not on a flat, stable surface; overload; dirty platform; calibration needed.	Place scale on a firm, level surface. Do not exceed maximum capacity. Clean the platform. If issues persist, contact support for calibration guidance.
Display shows "Err" or "OL".	Overload (weight exceeds maximum capacity).	Remove the item immediately to prevent damage. Ensure items are within the 440LB (200kg) limit.
Display is unstable or fluctuates.	Vibrations; air currents; unstable surface.	Ensure the scale is on a stable, vibration-free surface. Avoid drafts.

5. Specifications

Feature	Detail
Brand	MAXUS
Model Number	P029
Weight Capacity Maximum	440 Pounds (200 kg)
Readout Accuracy	10 Grams
Minimum Starting Point	150 Grams
Display Type	LCD, LED (Backlit Display)
Power Supply	2 x AAA Batteries, Type-C Power Supply
Item Weight	980 Grams
Recommended Uses	Packages, Postal, Warehouse, Market, Home Use

6. Warranty Information

Specific warranty details for the MAXUS P029 Digital Shipping Scale may vary by region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed information regarding warranty coverage and terms.

Generally, MAXUS products are designed for durability and reliability. Keep your proof of purchase for any warranty claims.

7. Customer Support

If you encounter any issues or have questions regarding your MAXUS P029 Digital Shipping Scale that are not addressed in this manual, please contact MAXUS customer support.

For the most up-to-date contact information, please visit the official MAXUS website or refer to the contact details provided with your product packaging.

When contacting support, please have your model number (P029) and purchase details ready.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.