Sortfle AM35 Electric Roller Blinds WiFi Motor Instruction Manual

1. Introduction

The Sortfle AM35 Electric Roller Blinds WiFi Motor is designed to automate various shading solutions, including roller blinds, outdoor sunshades, retractable patio screens, and golf simulator projection screens. This motor offers both remote control and WiFi connectivity for convenient operation.

It features a robust design with a 35mm diameter motor body, providing approximately 22kg (50 pounds) of pulling force. The motor operates on a 110V power supply and includes a built-in electronic limit switch for precise control of operating distances.

2. Safety Information

Always ensure the motor is connected to a suitable power supply and is used in accordance with the manufacturer's instructions to avoid electrical hazards.

• Do not expose the motor to moisture or extreme temperatures.
• Ensure all wiring connections are secure and properly insulated.
• Keep children and pets away from moving blinds or screens during operation.
• Disconnect power before performing any maintenance or adjustments.

3. Product Features

• Application Versatility: Suitable for roller blinds, outdoor sunshades, retractable patio screens, and projection screens.
• Powerful Torque: Delivers 6Nm of torque, providing approximately 22kg (50 pounds) of pulling force.
• Electronic Limit Switch: Built-in for adjustable and precise operating distances.
• 110V Power Supply: Wired operation, eliminating the need for recharging.
• Smart Control: Integrated WiFi module for direct router connection and remote control via a dedicated mobile application.
• Voice Control Compatibility: Supports voice commands through Alexa and Google Home.
• Remote Control: Includes a 1-channel RF 433MHz remote control for stable, long-distance operation.
• Scheduling: Ability to set timers for automatic opening and closing of blinds via the app.

4. Setup and Installation

This section guides you through the physical installation and initial configuration of your Sortfle AM35 motor.

4.1. Drive Wheel Selection and Installation

The AM35 motor is compatible with various pipe sizes. Ensure you select the correct drive wheel for your specific tube diameter. The motor comes with drive wheels designed for 2-inch, 2.2-inch, and 2.5-inch pipes. The current model is designed for a 2.2-inch tube, which typically uses a drive wheel with an outer diameter of 2 inches (52mm).

To install the drive wheel, slide it onto the motor shaft until it clicks into place. Ensure the grooves on the drive wheel align with any corresponding features on your roller blind's tube.

4.2. Wiring the Motor

The motor requires a 110V AC power connection. The motor cable typically includes three wires: neutral (blue), live (brown), and ground (green/yellow). Connect these wires to your power source according to local electrical codes. The yellow/green ground wire can be left hanging if not required by your specific installation, but it is recommended to connect it for safety.

4.3. App Pairing (WiFi)

To enable WiFi control, follow these steps to pair the motor with the Smart Life app:

1. Plug in the motor to a 110V power source.
2. Open the Smart Life app on your smartphone.
3. Press the 'Prog' button on the motor once.
4. Immediately short press the 'Prog' button four times.
5. On the fifth press, hold the 'Prog' button until the motor jerks twice. This indicates it is in WiFi pairing mode.
6. Release the button and in the Smart Life app, click 'Add Device'.
7. The app should discover the 'WiFi tubular motor'. Follow the on-screen prompts to add the device and enter your WiFi information.

4.4. Remote Control Pairing

To pair the included remote control with the motor:

1. Press the 'Prog' button on the motor once. The motor will jerk once.
2. Immediately press the 'Up' button on the remote control. The motor will jerk again, indicating successful pairing.

4.5. Setting Limits (Upper and Lower)

After pairing, set the upper and lower limits for your blinds or screen using the Smart Life app. This defines the full open and full closed positions. The app provides a dedicated setting option for both 'Limit Up' and 'Limit Down'. Adjust these settings to match the desired travel range of your installation.

4.6. Installation Video Guide

5. Operation

Once installed and paired, your Sortfle AM35 motor can be operated using the mobile app, voice commands, or the remote control.

5.1. Mobile App Control

The Smart Life app allows for comprehensive control:

• Open/Close: Use the virtual buttons to fully open or close your blinds.
• Percentage Control: Adjust the blinds to any desired intermediate position.
• Scheduling: Set up daily or weekly schedules for automatic opening and closing.
• Inverting Direction: If the motor operates in the opposite direction to your controls, you can invert the rotation direction within the app settings.

5.2. Voice Control

Integrate your motor with Amazon Alexa or Google Home for hands-free operation. Once linked through the Smart Life app, you can use commands such as "Alexa, open all blinds" or "Hey Google, close the living room shade."

5.3. Remote Control

The included RF 433MHz remote control provides direct physical control:

• Up Button: Moves the blinds upwards.
• Down Button: Moves the blinds downwards.
• Stop Button: Halts the blinds at their current position.

6. Specifications

7. Troubleshooting

• Motor Not Responding: Check power connection. Ensure the motor is properly plugged in and the power outlet is functional. Verify remote control battery and app connectivity.
• Incorrect Direction of Movement: If the blinds move in the opposite direction to the control input, use the "Inverting" option in the Smart Life app settings to correct the rotation.
• Limits Not Set Correctly: If the blinds do not stop at the desired upper or lower positions, re-enter the Smart Life app and adjust the "Limit Up" and "Limit Down" settings.
• WiFi Connection Issues: Ensure your WiFi network is 2.4GHz, as the motor may not support 5GHz networks. Check that the motor is within range of your WiFi router. Repeat the app pairing process if necessary.
• Remote Control Not Pairing: Ensure you are following the pairing steps precisely. The motor should jerk once after pressing its 'Prog' button, and again after pressing the 'Up' button on the remote. If it doesn't, try again or check for interference.

8. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official Sortfle website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

You can visit the Sortfle store for more products and support: Sortfle Store