XJD 12V Baby Bumper Car Instruction Manual

Important Safety Information

A WARNING:

• Use this product under direct adult supervision.
• This product is not suitable for children under 18 months. The manufacturer recommends use for children aged 36 months to 4 years.
• The toy is not designed for high speeds.
• Protective equipment, such as a helmet, should be worn.
• This toy does not have a brake.
• The remote control is intended for adult use only. Do not allow children to operate the remote control.
• When the vehicle is not in use, ensure the handbrake is engaged.
• Do not use the remote control to operate more than one car simultaneously.
• Avoid switching between forward and reverse while the car is in motion.
• Keep small parts out of reach of children under 3 years of age.
• Recharge the battery promptly when the vehicle's speed significantly decreases.
• Always ensure the safety belt is securely fastened before operation.

Product Overview

The XJD 12V Baby Bumper Car is an electric ride-on toy designed for toddlers, featuring 360-degree spinning capabilities, built-in music, and colorful LED lights. It offers two driving modes: parental remote control and independent child operation.

Key Features

• 360-degree unrestricted spinning for interactive play.
• Suitable for toddlers aged 18 months and older (manufacturer recommended age 36 months - 4 years).
• Built-in music playback for an enjoyable driving experience.
• Two driving modes: parental remote control for safety and independent driving for older children.
• Child-friendly safety features including a robust build and a safety belt.
• Colorful LED light strip for enhanced visual appeal.

Product Dimensions

• Length: 25.31 inches
• Width: 24.56 inches
• Height: 17.95 inches
• Recommended Weight Limit: 66 lbs (30 kg)
• Speed: 2 km/h
• Battery: 12V 4.5Ah

Setup Instructions

Follow these steps to assemble your XJD 12V Baby Bumper Car:

1. Attach the backrest to the main body of the car. Ensure it clicks securely into place.
2. Secure the backrest using the provided screws.
3. Install the steering column base.
4. Connect the wiring for the steering column to the main body.
5. Insert the steering column into its base and secure it with screws.
6. Connect the battery terminals (red to red, black to black).
7. Place the seat cover back into position.
8. Secure the seat cover with screws.

Operating Instructions

Powering On/Off

• To turn on the bumper car, press the power button located on the dashboard. The LED lights will illuminate, and a startup sound will play.
• To turn off, press the power button again.

Driving Modes

• Independent Driving: For children capable of operating the car themselves, use the steering wheel to control direction and the foot pedal (if applicable, or button on steering wheel) for movement.
• Parental Remote Control: Parents can use the provided remote control to guide the bumper car, ensuring the child's safety and assisting with navigation.

360-Degree Spin Function

• To activate the 360-degree spin, press the designated spin button (often integrated with the steering control) and turn the steering wheel. The car will rotate in place.

Music Playback

• Press the music button on the dashboard to cycle through pre-loaded tunes.
• The car may also feature USB or AUX input for custom music playback (refer to specific model features).

Maintenance

Battery Care

• Charge the battery fully before first use (8-12 hours).
• Do not overcharge the battery (maximum 18 hours).
• Recharge the battery after each use, or at least once a month if not in use, to prolong its lifespan.
• If the car slows down significantly, it indicates a low battery and requires charging.

Cleaning

• Wipe the car with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Keep electronic components dry.

Storage

• Store the bumper car in a dry, cool place away from direct sunlight and moisture.
• Disconnect the battery if storing for extended periods.

Troubleshooting

Car Does Not Move

• Check if the power button is pressed.
• Ensure the battery is fully charged and properly connected.
• Verify that the remote control is paired correctly (if using parental control mode).

Car Moves Slowly

• The battery may be low; recharge it.
• Ensure the car is not overloaded beyond the recommended weight limit.
• Check for any obstructions around the wheels.

Lights or Music Not Working

• Check battery charge.
• Ensure all connections are secure.

Specifications

Warranty and Support

For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official XJD website. Keep your proof of purchase for any warranty claims.