ABASK 1080P Dual Dashcam with 4-inch Screen

1. Introduction

Thank you for choosing the ABASK 1080P Dual Dashcam. This device is designed to provide reliable video evidence and enhance driving safety by recording both front and rear views of your vehicle. Equipped with a 4-inch screen, G-sensor, loop recording, and parking monitoring, it captures crucial details on the road and while parked. Please read this manual carefully to understand the product's features and ensure correct operation.

This is a general view of the ABASK 1080P Dual Dashcam, showcasing its compact design and front lens.

2. Package Contents

Please check the package for the following items:

• ABASK 1080P Dual Dashcam Unit
• Rear Camera
• Car Charging Cable
• Suction Cup Mount
• 32GB SD Card
• User Manual

This image displays the ABASK 1080P Dual Dashcam unit, the rear camera, the car charger, and the suction cup mount, illustrating all components included in the package.

3. Product Overview

The dashcam features a 4-inch LCD screen for easy viewing and menu navigation. Key controls and ports are typically located on the sides and bottom of the unit.

Main Unit Controls and Ports:

• Power Button: To turn the device on/off and toggle screen display.
• Menu Button: To access settings and options.
• Mode Button: To switch between video recording, photo mode, and playback.
• Up/Down Buttons: For navigation within menus and digital zoom.
• OK Button: To confirm selections or start/stop recording.
• Micro SD Card Slot: For inserting the memory card.
• Mini USB Port: For power supply and data transfer.
• Rear Camera Port: For connecting the rear camera.
• Reset Button: A small hole for factory reset (use a pin).

4. Setup

4.1. Install the Micro SD Card

1. Ensure the dashcam is powered off.
2. Insert the provided 32GB Micro SD card into the SD card slot until it clicks into place.
3. To remove, gently push the card in until it springs out.

Note: For optimal performance, format the SD card within the dashcam's settings before first use and periodically thereafter.

4.2. Mount the Dashcam

1. Clean the windshield area where you intend to mount the dashcam.
2. Attach the suction cup mount to the dashcam.
3. Press the suction cup firmly against the windshield and flip the lever to secure it.
4. Adjust the dashcam's angle to ensure a clear view of the road ahead, avoiding obstruction of your driving view.

4.3. Install the Rear Camera

1. Connect the rear camera cable to the rear camera port on the main dashcam unit.
2. Route the cable neatly along the vehicle's interior trim to the rear of the car.
3. Mount the rear camera on the rear windshield or license plate area, ensuring a clear view.
4. If mounting externally, ensure the camera is securely fixed and waterproofed.

4.4. Connect Power

1. Plug the car charging cable into the Mini USB port on the dashcam.
2. Insert the other end of the car charger into your vehicle's 12V power outlet (cigarette lighter socket).
3. Route the power cable neatly to avoid interference with driving controls.

4.5. Initial Setup

1. Once powered on, the dashcam will typically start recording automatically.
2. Access the menu settings to set the correct date and time, language, and other preferences.
3. Ensure loop recording, G-sensor sensitivity, and parking monitoring settings are configured as desired.

5. Operating Instructions

5.1. Power On/Off

• Automatic: The dashcam will power on and start recording automatically when your vehicle's ignition is turned on (if connected to a switched power source).
• Manual: Press and hold the Power button for a few seconds to manually turn the device on or off.

5.2. Basic Recording

The dashcam typically begins recording automatically when powered on. A red indicator or icon on the screen usually signifies active recording.

This image highlights the 1080P Full HD recording capability of the dashcam, capturing clear video. It also shows the wide-angle coverage, with a 170-degree front camera and a 140-degree rear camera, providing extensive road coverage.

5.3. Menu Navigation

• Press the Menu button to enter the settings menu.
• Use the Up/Down buttons to navigate through options.
• Press the OK button to select an option or confirm a setting.
• Press the Menu button again to exit the menu.

5.4. Loop Recording

This feature allows continuous recording by overwriting the oldest unlocked files when the SD card is full. Video segments are typically recorded in 1, 3, or 5-minute intervals.

This image demonstrates the loop recording function, which automatically overwrites the oldest unlocked video files when the memory card is full. A 32GB memory card is included, ensuring continuous recording without manual intervention.

5.5. G-Sensor (Emergency Accident Lock)

The built-in G-sensor detects sudden impacts or collisions. When triggered, it automatically locks the current video file, preventing it from being overwritten by loop recording. This ensures critical accident footage is preserved.

This image illustrates the G-Sensor's emergency accident lock function. In the event of a collision, the G-Sensor automatically detects the impact and locks the current video file, preventing it from being overwritten and securing crucial evidence.

5.6. Parking Monitoring & Motion Detection

When enabled, the dashcam can monitor your vehicle while parked. If a vibration or motion is detected, the dashcam will automatically power on and record a short video clip. This feature requires a continuous power supply, often via an optional hardwire kit (not included).

This image illustrates the 24-hour parking monitoring feature. When the vehicle is parked, the dashcam automatically detects vibrations and begins recording, providing surveillance even when the car is unattended. Note: This feature requires an ACC hardwire kit (not included) for continuous power.

5.7. Night Vision

The dashcam is equipped with technology (e.g., WDR) to enhance video clarity in low-light conditions, providing improved visibility and detail during nighttime recording.

5.8. Reversing View

When the rear camera is properly installed and connected to the reverse light trigger (if applicable), the dashcam screen will automatically display the rear view with parking guidelines when the vehicle is put into reverse, assisting with safe parking.

This image displays the full-screen reversing view, which activates automatically when the vehicle is in reverse. It includes a parking grid overlay to assist with safer and easier parking maneuvers.

6. Maintenance

6.1. Cleaning the Device

• Use a soft, dry cloth to clean the dashcam body and screen.
• For lenses, use a specialized lens cleaning cloth to avoid scratches.
• Do not use chemical cleaners or solvents.

6.2. SD Card Management

• Format the SD card regularly (e.g., once a month) within the dashcam's settings to prevent data corruption and ensure optimal recording performance.
• Replace the SD card if you notice frequent errors or degraded performance.

7. Troubleshooting

• Dashcam does not power on:
  - Check if the car charger is properly connected to both the dashcam and the vehicle's power outlet.
  - Ensure the vehicle's power outlet is functioning.
  - Try a different power source or cable if available.
  - Press the reset button with a pin.
• Dashcam stops recording or shows an error:
  - Format the SD card within the dashcam's settings.
  - Ensure the SD card is a high-speed Class 10 or U3 card.
  - Replace the SD card if the issue persists.
• Video footage is blurry or unclear:
  - Clean the dashcam lens and your windshield.
  - Ensure the protective film has been removed from the lens.
  - Check if the dashcam is securely mounted and not vibrating.
• Rear camera is not working:
  - Check the connection cable between the main unit and the rear camera.
  - Ensure the rear camera is properly installed and powered (if it has a separate power connection).
• Parking monitor is not working:
  - Ensure the parking monitor feature is enabled in the settings.
  - Verify that the dashcam is receiving continuous power (e.g., via a hardwire kit, not included).

8. Specifications

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official ABASK website. Keep your purchase receipt as proof of purchase for warranty claims.

You can also visit the ABASK store on Amazon for more information: ABASK Store