STRICH SAT-02P Middle Profile Dual X-Shape Folding Amplifier Stand Instruction Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your STRICH SAT-02P Middle Profile Dual X-Shape Folding Amplifier Stand. Please read these instructions carefully before use to ensure safe and efficient operation.

Safety Information

• Ensure the stand is placed on a stable, level surface before placing any equipment on it.
• Do not exceed the maximum load capacity of 176 lbs (80 kg).
• Verify all connections and locking mechanisms are secure before use.
• Keep fingers clear of moving parts during assembly and adjustment to prevent pinching.
• Regularly inspect the stand for any signs of wear or damage. Do not use if damaged.
• Keep out of reach of children.

Package Contents

Verify that all components are present before beginning assembly:

• Main X-frame assembly (1 unit)
• Long support bars (2 units)
• Short support bars (2 units)
• Hex key (1 unit)
• Screws (4 units)

Setup and Assembly

The STRICH SAT-02P amplifier stand is designed for quick and easy assembly. Follow these steps:

1. Unpack Components: Carefully remove all parts from the packaging.
2. Prepare the X-Frame: Loosen the central locking mechanism on the main X-frame assembly.
3. Attach Support Bars:
   • Identify the two longer support bars and the two shorter support bars.
   • Attach the long support bars to the outer positions of the X-frame using the provided screws and hex key.
   • Attach the short support bars to the inner positions of the X-frame using the remaining screws and hex key.
4. Adjust Foot Pads: Adjust the spiral foot pads on the bottom of the stand to ensure stability on any surface.
5. Secure the Stand: Open the X-frame to your desired width and height, then firmly engage the central locking lever to secure the stand in position.

Assembly Video Guide:

Operating Instructions

1. Placement: Position the stand on a flat, stable surface.
2. Adjusting Height and Tilt:
   • Loosen the central locking lever.
   • Adjust the X-frame to achieve the desired height and tilt angle. The stand offers a 30-degree tilt angle for optimal sound projection.
   • Once adjusted, firmly push the locking lever back into place to secure the position.
3. Placing Equipment: Carefully place your amplifier or speaker onto the support bars. Ensure the equipment is centered and stable on the stand. The anti-vibration rubber feet on the support bars help prevent resonance and slippage.

Maintenance

• Cleaning: Wipe the stand with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners.
• Inspection: Periodically check all screws and joints for tightness. Tighten if necessary using the provided hex key.
• Storage: When not in use, fold the stand flat for compact storage. Store in a dry place away from extreme temperatures.

Troubleshooting

Specifications

• Model: SAT-02P
• Material: Metal
• Color: Black
• Load Capacity: 176 Pounds (80 kg)
• Item Weight: 4.41 pounds (2 kg)
• Package Dimensions: 24.2 x 6.4 x 6.2 inches (61.5 x 16.3 x 15.7 cm)
• Base Type: Dual X-shaped
• Tilt Angle: 30 degrees
• Assembly Required: Yes

Warranty and Support

STRICH products come with a 12-month warranty from the date of purchase. For warranty claims, technical support, or any inquiries, please contact STRICH customer service. Our team is available to provide prompt responses within 24 hours via email chat assistance.

We also offer a 30-day free return policy. Please refer to your purchase documentation for specific contact details or visit the official STRICH website.