NXR 880-0022B

NXR 3 Burner Portable Gas Grill

User Instruction Manual

Important Safety Information

Read all instructions carefully before assembling or operating this grill. Failure to follow these instructions could result in fire, explosion, or serious injury.

  • For outdoor use only. Do not operate this appliance inside any building, garage, or other enclosed area.
  • Keep children and pets away from the grill at all times.
  • Always operate the grill on a level, stable, non-combustible surface.
  • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
  • Always check for gas leaks before each use and after replacing the gas cylinder.
  • This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Product Overview

The NXR 3 Burner Portable Gas Grill (Model: 880-0022B) is designed for convenient outdoor cooking. It features three main burners, stainless steel construction, and a compact design for portability.

NXR 3 Burner Portable Gas Grill, closed lid, side view

Figure 1: The NXR 3 Burner Portable Gas Grill with its lid closed, showcasing the control knobs and the attached gas hose with regulator. This view highlights its compact and portable design.

NXR 3 Burner Portable Gas Grill with lid open, front view

Figure 2: The NXR 3 Burner Portable Gas Grill with the lid open, providing a clear view of the stainless steel cooking grates and the burner area. This demonstrates the ample cooking surface.

Close-up of stainless steel grill grates

Figure 3: A detailed close-up of the durable stainless steel cooking grates, designed for even heat distribution and easy cleaning.

Close-up of grill control knob

Figure 4: A close-up of one of the control knobs, clearly marked with "ARRÊT / OFF" (Stop / Off), allowing precise control over each burner's flame intensity.

Interior view of grill with heat deflectors

Figure 5: An interior view of the grill, showing the stainless steel heat deflectors positioned above the burners. These deflectors help distribute heat evenly and protect the burners from drippings.

Removable grease tray

Figure 6: The easily accessible and removable grease tray located beneath the grill, designed to collect drippings for convenient cleaning and maintenance.

Setup

1. Assembly

The NXR Portable Gas Grill requires some assembly. Follow the detailed instructions provided in the separate assembly guide included with your product. Ensure all components are securely fastened before proceeding.

  • Unpack all components and verify against the parts list.
  • Attach the legs and handle as per the assembly guide.
  • Install the cooking grates and heat deflectors.

2. Connecting the Gas Cylinder

This grill is designed for use with a standard 20 lb (9.1 kg) propane gas cylinder (not included). Ensure the cylinder is upright and on a level surface.

  1. Ensure all burner control knobs are in the "OFF" position.
  2. Connect the regulator hose to the gas cylinder valve. Turn the coupling nut clockwise until it is fully tightened. Do not overtighten.
  3. Open the gas cylinder valve slowly, turning it counter-clockwise.

3. Leak Test

Perform a leak test every time the gas cylinder is connected or if you suspect a leak.

  1. Prepare a soap and water solution (50/50 mix).
  2. Ensure all burner knobs are "OFF".
  3. Open the gas cylinder valve.
  4. Apply the solution to all gas connections, including the hose, regulator, and manifold connections.
  5. Look for bubbles. If bubbles appear, there is a leak. Close the gas cylinder valve immediately and tighten the connection. Repeat the test. If bubbles persist, do not use the grill and contact customer support.
  6. Rinse off any soap solution after testing.

Operating Instructions

1. Lighting the Grill

  1. Ensure the gas cylinder valve is fully open.
  2. Open the grill lid.
  3. Push in and turn one burner control knob to the "HIGH" position.
  4. Press the igniter button repeatedly until the burner lights. You should hear a clicking sound and see a flame.
  5. If the burner does not light within 5 seconds, turn the knob to "OFF", wait 5 minutes for gas to dissipate, and repeat the lighting procedure.
  6. Once one burner is lit, you can light the other burners by turning their respective knobs to "HIGH".

2. Preheating

After lighting, close the lid and allow the grill to preheat for 10-15 minutes on high heat. This helps to burn off any manufacturing residues and ensures the cooking grates are hot enough for optimal cooking.

3. Temperature Control

Adjust the burner control knobs to achieve the desired cooking temperature. Turn the knobs towards "LOW" for lower heat and "HIGH" for maximum heat. The three independent burners allow for direct and indirect cooking zones.

4. Shutting Down the Grill

  1. Turn all burner control knobs to the "OFF" position.
  2. Close the gas cylinder valve by turning it clockwise until fully closed.
  3. Allow the grill to cool completely before moving or cleaning.

Maintenance

Regular maintenance will extend the life of your grill and ensure optimal performance.

1. Cleaning the Cooking Grates

  • After each use, once the grill has cooled, brush off any food residue from the grates using a grill brush.
  • For deeper cleaning, remove the grates and wash with warm soapy water. Rinse thoroughly and dry completely before reinstalling.

2. Cleaning the Grease Tray

  • Regularly check and empty the grease tray (Figure 6).
  • Remove the tray and dispose of accumulated grease safely.
  • Wash the tray with warm soapy water, rinse, and dry thoroughly.

3. Exterior Cleaning

  • Wipe down the stainless steel surfaces with a soft cloth and a mild detergent or stainless steel cleaner.
  • Avoid abrasive cleaners or scouring pads, which can scratch the finish.

4. Storage

When not in use, store the grill in a dry, protected area. Disconnect the gas cylinder and store it outdoors in a well-ventilated area, away from direct sunlight or heat sources.

Troubleshooting

ProblemPossible CauseSolution
Burner won't light with igniter.No gas flow; clogged burner port; faulty igniter.Check gas cylinder connection and valve. Perform leak test. Clean burner ports. Try manual lighting with a long match.
Low flame or uneven heating.Low gas pressure; clogged burner ports; regulator issue.Ensure gas cylinder is not empty. Clean burner ports. Reset regulator by turning off all gas, disconnecting, waiting 30 seconds, and reconnecting.
Gas smell.Gas leak.Immediately turn off gas at the cylinder. Perform a leak test. Do not operate the grill if a leak is detected.

Specifications

FeatureDetail
BrandNXR
Model Number880-0022B
Fuel TypeGas (Propane)
Main Burner Count3
Cooking Surface Area312 Square Inches
MaterialStainless Steel
Assembly RequiredYes
Included ComponentsGas Cylinder (Partial), Stainless Steel Handle
UPC850027627571

Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official NXR website. You may also contact NXR customer service directly for assistance with product operation, parts, or troubleshooting beyond this manual.

Keep your purchase receipt and model number (880-0022B) handy when contacting support.

© 2024 NXR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.