1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Hikvision 2-Wire Video Intercom Kit. This system offers advanced access control and communication features for single-family residences, utilizing a two-wire connection for simplified setup.
The kit includes an outdoor station with a Full HD wide-angle camera, a 7-inch indoor monitor, a 24V power supply, and mounting accessories. The indoor monitor powers the outdoor station and one of the relays (for electric strike release). Remote access is available via the Hik-Connect app, allowing real-time camera viewing, recording playback, notifications, two-way communication, input control, and event history logging.
2. Package Contents
Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your supplier.
- 1x Indoor Monitor (7-inch Touch Screen)
- 1x Outdoor Station (Full HD Camera, IP65)
- 1x 24V Power Supply
- Mounting Accessories (screws, brackets, etc.)
- User Manual (this document)

Figure 2.1: Overview of the Hikvision 2-Wire Video Intercom Kit, showing the indoor monitor, outdoor station, and mobile app interface.
3. Key Features
- Two-Wire Connection System: Simplifies installation by utilizing existing wiring for both power and data transmission.
- 7-inch Touch Screen Monitor: Provides convenient operation and interaction with the system.
- Full HD Outdoor Camera: Features a 1920x1080 resolution camera for high-quality image and detailed recordings.
- Wide Viewing Angles: Camera offers 144° horizontal and 95° vertical viewing angles.
- Excellent Night Vision: Equipped with IR diodes for clear visibility in low-light conditions.
- IP65 Rated Outdoor Station: Ensures protection against dust and water ingress.
- Mobile App Integration: Compatible with the Hik-Connect app for remote monitoring, management, and communication.
- Expandability: Supports up to 1 additional monitor and 16 surveillance cameras.
- Electric Strike Control: Directly powers and controls an electric strike without additional power supply.
- Day/Night Function: Automatic adjustment for optimal performance in varying light conditions.
- Anti-Eavesdropping Protection: Enhances communication security.
4. Safety Information
Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in injury, damage to the product, or voiding of the warranty.
- Installation must be performed by qualified personnel in accordance with local electrical codes.
- Disconnect power before performing any wiring or maintenance.
- Do not expose the indoor monitor to moisture or extreme temperatures.
- Ensure proper grounding for all components.
- Use only the provided power supply or a Hikvision-approved equivalent.
- Avoid placing the outdoor station in direct sunlight for prolonged periods to prevent overheating.
5. Setup
5.1. Installation Overview
The Hikvision 2-Wire Video Intercom Kit is designed for single-family use and supports both surface and flush mounting for the outdoor station. The indoor monitor is surface-mounted.
5.2. Mounting the Indoor Monitor
The indoor monitor is designed for surface mounting. Choose a suitable location indoors, away from direct sunlight and heat sources.
- Secure the mounting plate to the wall using appropriate screws and anchors.
- Connect the necessary wiring to the monitor terminals (refer to Section 5.4 for wiring details).
- Carefully attach the monitor to the mounting plate, ensuring it clicks securely into place.

Figure 5.2.1: Front view of the indoor monitor.

Figure 5.2.2: Side profile of the indoor monitor.

Figure 5.2.3: Rear view of the indoor monitor and its mounting bracket, illustrating connection points.
5.3. Mounting the Outdoor Station
The outdoor station can be surface-mounted or flush-mounted. Ensure the chosen location provides clear visibility of visitors and is protected from direct heavy rain if possible, despite its IP65 rating.
- For surface mounting, use the provided rain shield/surface mount box. Secure it to the wall.
- For flush mounting, prepare an opening in the wall according to the dimensions of the flush mount box. Insert and secure the flush mount box.
- Connect the necessary wiring to the outdoor station terminals (refer to Section 5.4 for wiring details).
- Attach the outdoor station to the mounting box/shield, ensuring it is securely fastened and sealed against weather elements.

Figure 5.3.1: Front view of the outdoor station.

Figure 5.3.2: Angled view of the outdoor station.

Figure 5.3.3: Outdoor station components, including mounting options.
5.4. Wiring Diagram and Connections
The system uses a 2-wire connection. The indoor monitor receives power from the 24V power supply and then transmits power and data to the outdoor station. An electric strike can be connected directly to the outdoor station without an additional power supply.
- 2-Wire Connection: Connect the two wires from the outdoor station to the designated 2-wire terminals on the indoor monitor.
- Power Supply: Connect the 24V power supply to the indoor monitor.
- Electric Strike: Connect the electric strike to the designated relay terminals on the outdoor station.
- Additional Cameras: Up to 16 surveillance cameras can be integrated into the system. Refer to the Hik-Connect app documentation for detailed setup.

Figure 5.4.1: Rear view of the outdoor station with wiring terminals labeled for 2-wire, lock, and alarm connections. Serial Number: AF3693934

Figure 5.4.2: Detailed rear view of the outdoor station's wiring interface.
5.5. Initial Configuration
After physical installation and wiring, power on the system. The indoor monitor will guide you through the initial setup process, which typically includes:
- Language selection.
- Network configuration (Wi-Fi 2.4 GHz IEEE 802.11 b/g/n).
- Pairing with the outdoor station.
- Setting up the Hik-Connect mobile app.
For detailed app setup, download the Hik-Connect app from your device's app store and follow the in-app instructions to add your device.
6. Operating Instructions
6.1. Using the Indoor Monitor
- Receiving Calls: When a visitor presses the call button on the outdoor station, the indoor monitor will ring. Touch the screen to answer the call.
- Two-Way Communication: Engage in hands-free communication with the visitor.
- Door Release: During a call, an icon on the screen allows you to remotely open the connected electric strike.
- Live View: Access a live video feed from the outdoor station camera at any time.
- Settings: Adjust volume, ringtones (3 available), and other system preferences via the touch screen interface.
- Memory Function: The monitor includes a memory function for recording events. It also has an SD card reader for expanded storage (note: some models may not include an SD card reader, verify your specific unit).
6.2. Using the Hik-Connect Mobile App
The Hik-Connect app provides remote access and control over your intercom system.
- Real-time Image Preview: View live video from the outdoor station camera.
- Recording Playback: Access and play back recorded events.
- Notifications: Receive alerts for incoming calls or motion detection.
- Remote Communication: Talk to visitors from anywhere.
- Input Control: Remotely open the door or gate.
- Event History: Review a log of all system events.
6.3. Day/Night Function
The outdoor station automatically switches between day and night modes. In low-light conditions, the IR diodes activate to provide clear black-and-white night vision.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the monitor screen and outdoor station lens. Do not use abrasive cleaners or solvents.
- Firmware Updates: Regularly check for and install firmware updates via the Hik-Connect app or Hikvision's official website to ensure optimal performance and security.
- Wiring Inspection: Periodically inspect all wiring connections for signs of wear or damage.
- Environmental Protection: Ensure the outdoor station's IP65 rating is maintained by keeping its seals intact.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to monitor/outdoor station | Power supply disconnected; faulty wiring; power outage. | Check power supply connection; inspect 2-wire connection; verify main power. |
| No video from outdoor station | Loose 2-wire connection; camera fault; monitor settings. | Verify 2-wire connection; restart system; check monitor display settings. |
| Cannot hear visitor / Visitor cannot hear me | Microphone/speaker obstruction; volume settings; faulty unit. | Check for obstructions; adjust volume on monitor; test communication via app. |
| Door strike not opening | Incorrect wiring to electric strike; faulty strike; system setting. | Verify electric strike wiring; test strike functionality independently; check door release settings. |
| Hik-Connect app not connecting | Wi-Fi connectivity issues; incorrect app settings; device not paired. | Check Wi-Fi signal strength; reconfigure network settings on monitor; re-pair device in app. |
If the problem persists after attempting these solutions, please contact Hikvision technical support.
9. Specifications
General System
- Type: Single-family
- Connection Method: 2-Wire (Wired)
- Power Supply: DC 24V (from indoor monitor)
- Wi-Fi Frequency: 2.4 GHz (IEEE 802.11 b/g/n)
- Mobile Application: Hik-Connect
- Max. Monitors: 1 (expandable to 1 additional)
- Max. Outdoor Panels: 1 (expandable to 1 additional)
- Max. Surveillance Cameras: 16
- Electric Strike Control: Yes (no additional power needed)
- Gate Automation Control: Yes
- Day/Night Function: Yes
- Anti-Eavesdropping: Yes
Indoor Monitor
- Mounting Method: Surface Mount
- Hands-Free System: Yes
- Screen Diagonal: 7 inches
- Monitor Resolution: 1024 x 600
- Touch Screen: Yes
- Image System: PAL, Color
- Memory Function: Yes
- SD Card Reader: Yes (verify specific unit)
- Intercom Function: No (between monitors)
- Ringtones: 3
- Call Signal Recognition: Yes
- Volume Control: Yes
- Ringtone Mute: Yes
- Material: Plastic
- Color: Black and Silver
- Dimensions (W x H x D): 200 mm x 140 mm x 23.6 mm
Outdoor Station
- Number of Bell Buttons: 1
- Mounting Method: Surface Mount or Flush Mount
- Camera Resolution: 1920 x 1080 (Full HD)
- Camera Viewing Angle (Vertical): 95°
- Camera Viewing Angle (Horizontal): 144°
- Night Illumination: IR
- Proximity Card/Key Fob Reader: No
- Label/Marking Space: Yes
- Protection Rating (IP): IP65
- Material: Stainless Steel
- Color: Silver
- Dimensions (W x H x D): 110 mm x 169 mm x 31 mm
10. Warranty and Support
10.1. Warranty Information
Hikvision products are covered by a limited warranty. Please refer to the warranty card included with your product or visit the official Hikvision website for detailed warranty terms and conditions specific to your region.
Note: The warranty may be voided if the product is damaged due to improper installation, unauthorized modification, or misuse.
10.2. Technical Support
For technical assistance, troubleshooting, or further inquiries, please contact Hikvision technical support through their official website or the contact information provided in your product documentation.
When contacting support, please have your product model number (DS-KIS703Y-P) and serial number (found on the back of the outdoor station, e.g., AF3693934) ready.