1. Introduction
Thank you for choosing the HOFTRONIC Luxor V2 LED Floodlight. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new floodlight. This ultra-efficient LED floodlight delivers 160 lumens per watt, consuming only 100W to produce 16000 lumens of neutral white light (4000K). It is designed for illuminating large areas and features anti-glare glass for comfortable viewing. The robust IP65-rated, corrosion-free aluminum construction, along with a breathable membrane, ensures optimal performance in various outdoor conditions.
Figure 1: HOFTRONIC Luxor V2 LED Floodlight, a powerful and efficient lighting solution.
2. Safety Instructions
Please read these safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected before any installation, maintenance, or repair work.
- Voltage: Connect the floodlight only to a 230 Volt AC power supply.
- Grounding: Ensure the floodlight is properly grounded to prevent electric shock.
- Mounting: Mount the floodlight securely on a stable surface that can support its weight. Avoid mounting near flammable materials.
- Temperature: Do not operate the floodlight in environments exceeding its specified operating temperature range.
- Damage: Do not use the floodlight if the housing, glass, or cable is damaged. Contact support for assistance.
- Disassembly: Do not attempt to disassemble or modify the floodlight. This will void the warranty and may cause safety hazards.
3. Package Contents
Verify that all components are present and undamaged:
- 1x HOFTRONIC Luxor V2 LED Floodlight (100W, 4000K)
- 1x Mounting Bracket
- 1x User Manual
4. Setup and Installation
Follow these steps for proper installation of your LED floodlight:
- Choose Location: Select a suitable mounting location that provides the desired illumination coverage and is structurally sound. The floodlight is suitable for both indoor and outdoor use.
- Mark Drilling Points: Use the mounting bracket as a template to mark the drilling points on the chosen surface (wall, ground, or pole).
- Drill Holes: Drill appropriate holes for the mounting screws.
- Secure Bracket: Attach the mounting bracket securely to the surface using suitable screws and anchors (not included).
- Attach Floodlight: Mount the floodlight onto the secured bracket. The bracket allows for tiltable adjustment to direct the light as needed.
Figure 2: The floodlight features a tiltable mount for flexible light direction.
Figure 3: Examples of mounting the floodlight on a wall, ground, or pole.
- Electrical Connection: Connect the floodlight's power cable to your 230V AC electrical supply. Ensure all connections are secure and waterproof, especially for outdoor installations. Consult a qualified electrician if you are unsure about wiring.
5. Operating Instructions
The HOFTRONIC Luxor V2 LED Floodlight operates directly from the main power supply. Once properly installed and connected to power, it will illuminate when the connected switch is turned on.
- Power On/Off: Use the external switch connected to the floodlight's power supply to turn the light on or off.
- Light Direction: Adjust the tiltable mount to direct the light beam to your desired area.
- Anti-Glare Feature: The integrated anti-glare glass reduces harshness, making it suitable for areas like driveways or parking lots where direct viewing might occur.
Figure 4: The anti-glare glass provides a more comfortable viewing experience compared to standard floodlights.
6. Maintenance
The HOFTRONIC Luxor V2 LED Floodlight is designed for low maintenance and durability.
- Cleaning: Periodically clean the floodlight's surface and glass with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the power is off before cleaning.
- Corrosion Resistance: The floodlight is made from maintenance-free, rust-proof aluminum, ensuring long-term durability in various weather conditions.
- Breathable Membrane: The integrated breathable membrane prevents moisture accumulation inside the lamp, maintaining optimal performance.
- Weather Resistance: With an IP65 rating, the floodlight is protected against dust and water jets, making it suitable for use in rain, dust, and snow.
Figure 5: The floodlight is built to withstand various weather conditions, including heat, cold, and rain.
Figure 6: The patented ventilation plug prevents moisture buildup inside the fixture.
7. Troubleshooting
If you encounter issues with your floodlight, refer to the following common problems and solutions:
- Light does not turn on:
- Check the power supply and ensure the switch is in the 'ON' position.
- Verify all electrical connections are secure.
- Ensure the circuit breaker has not tripped.
- Light is dim or flickers:
- Ensure the floodlight is receiving the correct voltage (230V).
- Check for loose wiring connections.
- Clean the glass surface if it is dirty.
- Water inside the fixture:
- While the floodlight is IP65 rated, extreme conditions or improper installation can sometimes lead to issues. Ensure all seals are intact and the breathable membrane is not obstructed. If water ingress persists, contact support.
If these steps do not resolve the issue, please contact customer support.
8. Specifications
| Brand | HOFTRONIC |
| Model Number | 2713201 |
| Power Consumption | 100 Watts |
| Luminous Flux | 16000 Lumens |
| Luminous Efficacy | 160 lm/W |
| Color Temperature | 4000 Kelvin (Neutral White) |
| Voltage | 230 Volts AC |
| IP Rating | IP65 (Dust tight, protected against water jets) |
| IK Rating | IK07 (Impact protected safety glass) |
| Material | Aluminum |
| Dimensions (L x W x H) | 25 x 24 x 4 cm |
| Weight | 5 Kilograms |
| Average Lifespan | 30,000 Hours |
| Beam Angle | 120 Degrees |
| Special Features | Anti-glare glass, Breathable membrane, Corrosion-free coating, High color rendering (CRI < 80) |
Figure 7: The floodlight is equipped with IK07 safety glass for impact protection.
9. Warranty and Support
HOFTRONIC stands behind the quality of its products. This floodlight comes with a standard manufacturer's warranty. For specific warranty terms, please refer to the documentation provided with your purchase or contact HOFTRONIC customer service.
If you experience any problems with your product or have questions not covered in this manual, please do not hesitate to contact us. We aim to respond to all inquiries within 24 hours.
Contact Information: Refer to your purchase documentation or the HOFTRONIC official website for the most up-to-date contact details.
