Introduction
This instruction manual provides detailed guidance for assembling your nanoblock Demon Slayer: Kimetsu no Yaiba - Tanjiro Kamado (Sun Breathing) Character Collection Series Building Kit. This kit allows you to construct a miniature model of Tanjiro Kamado, featuring his Sun Breathing form.
The completed model stands approximately 2.48 inches (6.3 cm) tall and consists of 230 micro-sized building pieces. The assembly difficulty for this model is rated as Level 3 on a scale of 1 to 5, where 1 is the easiest and 5 is the most advanced. This kit is recommended for individuals aged 15 years and older.

Image: The fully assembled nanoblock Tanjiro Kamado figure, showcasing its detailed design and compact size.
nanoblock pieces are manufactured to high tolerances, ensuring a precise fit for creating intricate 3D art. Each set includes comprehensive step-by-step instructions to guide you through the building process.
Safety Information
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
Keep all small parts away from young children to prevent accidental ingestion. Adult supervision is recommended for younger builders within the recommended age range.
Setup and Preparation
- Unpack Contents: Carefully open the product box and remove all nanoblock pieces and the instruction manual.
- Prepare Workspace: Choose a clean, flat, and well-lit surface for assembly. This will help prevent losing small pieces and ensure clear visibility of the instructions.
- Organize Pieces: It is recommended to sort the nanoblock pieces by color and shape before beginning assembly. This can significantly streamline the building process.
- Review Instructions: Familiarize yourself with the entire instruction manual before starting. Pay close attention to the symbols and diagrams used.

Image: The nanoblock product box for Tanjiro Kamado, showing the character and model number NBCC164.
Assembly Instructions (Operating)
Follow the detailed step-by-step diagrams provided in the included instruction booklet. Each step illustrates which pieces to use and where to place them.
- Step-by-Step Guidance: Proceed through the instructions one step at a time. Ensure each piece is securely attached before moving to the next step.
- Piece Orientation: Pay close attention to the orientation of each nanoblock piece as shown in the diagrams. Incorrect orientation can affect the stability and appearance of the final model.
- Small Pieces: Due to the micro size of the blocks (as small as 4mm x 4mm x 5mm), using tweezers can aid in precise placement and handling, especially for smaller or hard-to-reach areas.
- Pressure Application: Apply gentle, even pressure when connecting blocks to ensure a firm fit without damaging the pieces or the structure.

Image: A detailed side view of the assembled Tanjiro Kamado nanoblock figure, highlighting the intricate layering of blocks.

Image: A visual representation of nanoblock difficulty levels, showing various models corresponding to levels 1 through 5.
Maintenance
- Cleaning: To clean your assembled nanoblock model, gently wipe it with a dry, soft cloth. For stubborn dust, a soft brush or compressed air can be used. Avoid using water or chemical cleaners, as these may damage the blocks or cause discoloration.
- Storage: Store the assembled model in a stable location away from direct sunlight, extreme temperatures, and high humidity to prevent warping or fading of the plastic. If disassembling for storage, keep all pieces in a sealed container to prevent loss.
Troubleshooting
- Missing Pieces: While nanoblock sets typically include extra pieces, if you believe a crucial piece is missing, double-check your workspace and the packaging. If a piece is genuinely missing, refer to the support section for assistance.
- Loose Connections: If parts of your model feel unstable or loose, re-examine the corresponding steps in the instruction manual. Ensure that all blocks are fully pressed down and correctly aligned. Sometimes, slight adjustments to surrounding blocks can improve stability.
- Difficulty with Assembly: If you encounter difficulty with a particular step, take a break and re-approach it with fresh eyes. Verify that you are using the correct pieces and that their orientation matches the diagram precisely.
Specifications
| Product Name | nanoblock Demon Slayer: Kimetsu no Yaiba - Tanjiro Kamado (Sun Breathing) Character Collection Series Building Kit |
| Model Number | NBCC164 |
| Number of Pieces | 230 |
| Assembled Dimensions | Approximately 1.5 x 2.5 x 2.48 inches (3.8 x 6.35 x 6.3 cm) |
| Item Weight | 1.09 ounces (30.9 grams) |
| Recommended Age | 15 years and up |
| Manufacturer | Kawada |

Image: A nanoblock model held in a hand, illustrating the compact and miniature scale of the finished product.
Warranty and Support
This nanoblock product is an officially licensed Kawada product, distributed by Bandai Namco for the U.S. Markets. The product box features a Bandai Namco warning label, which serves as proof of authenticity and entitles the purchaser to product support assistance within the United States.
For product support, inquiries regarding missing pieces, or other assistance, please refer to the contact information provided on the product packaging or visit the official nanoblock or Bandai Namco website for customer service details.
This product has been thoroughly tested for safety and meets all North American consumer product safety regulations.