PawHut Animal Trap Cage Instruction Manual

Introduction

Thank you for choosing the PawHut Animal Trap Cage. This humane trap is designed for the safe and effective capture of small to medium-sized animals such as rats, mice, nutria, raccoons, opossums, small foxes, cats, and rabbits. Its double-door design increases the success rate of capture, and the sturdy construction ensures durability. Please read this manual carefully before setup and operation to ensure proper and safe use.

Image: The PawHut Animal Trap Cage, a green wire mesh cage with two entry points and a central trigger plate, designed for humane animal capture.

Image: Illustrations of various small to medium-sized animals including raccoons, opossums, small foxes, cats, rabbits, and minks, indicating the types of animals this trap is suitable for.

Important Safety Instructions

• Always wear protective gloves when handling the trap to prevent transferring human scent to the trap and to protect yourself from potential bites or scratches from captured animals.
• Check the trap frequently, at least once every few hours, to minimize stress to captured animals.
• Never leave captured animals unattended for extended periods, especially in extreme weather conditions.
• Release captured animals in an appropriate, safe location away from residential areas, following local regulations.
• Do not attempt to capture animals larger than the trap is designed for.
• Keep children and pets away from the trap when it is set.
• Handle the trap with care to avoid accidental triggering.

Package Contents

Please ensure all parts are present before assembly:

• 1 x PawHut Animal Trap Cage (main body)
• 2 x End Doors (pre-attached or requiring minor assembly)
• 1 x Sensitive Trigger Plate (pre-installed)
• 1 x Carry Handle
• Locking mechanisms/rods (if applicable for securing doors)

Setup and Assembly

The PawHut Animal Trap Cage is designed for quick and easy setup. Most components are pre-assembled. Follow these steps to prepare your trap:

1. Unfold the Trap: Carefully unfold the trap cage from its collapsed state. Ensure all wire panels are properly aligned.
2. Secure the Doors: The trap features two end doors. Lift each door and secure it in the open position using the provided latch or hook mechanism. Ensure the doors are firmly held open and will release smoothly when the trigger is activated.
3. Check Trigger Mechanism: Verify that the sensitive trigger plate is free to move and will activate the door closing mechanism when pressed.
4. Inspect for Damage: Before placing the trap, inspect it for any damage that might compromise its function or the safety of the animal.

Image: A diagram highlighting key features of the trap: the two-door design for increased capture success, the sensitive trigger plate for quick and secure capture, and the solid iron plate for protection against animal attack.

Image: A close-up view of the latch mechanism on the trap door, showing how it holds the door open and releases upon trigger activation.

Operating Instructions

Follow these steps for effective and humane animal trapping:

1. Select Bait: Choose an appropriate bait that will attract the target animal. (See "Suggested Baits" below).
2. Wear Gloves: Always wear protective gloves to avoid transferring human scent to the trap, which can deter animals.
3. Place Bait: Carefully place the bait beyond the trigger plate, towards the center of the trap. Ensure the bait is not directly on the trigger mechanism itself, but rather encourages the animal to step onto the plate to reach it.
4. Identify Animal Activity Area: Locate an area where animal activity is evident, such as near burrows, feeding areas, or common pathways.
5. Position the Trap: Place the trap on a flat, stable surface in the identified area. Ensure both doors are securely set in the open position.
6. Create a Bait Trail: For better results, create a small trail of bait leading into the trap from both entrances.

Image: A six-panel visual guide illustrating the method of capture: 1. Select bait, 2. Wear gloves, 3. Place bait inside the cage (not on the mechanism), 4. Find an animal-frequented area, 5. Place the cage in a correct position, 6. Create a bait trail leading to the cage entrance.

Suggested Baits

• For Cats: Cat food, Sardines
• For Rabbits: Bananas, Carrots, Sweet Potatoes
• For Raccoons and Opossums: Bacon, Cat food, Sardines, Marshmallows

Image: A visual guide showing suggested baits for different animals: cat food/sardines for cats, bananas/carrots/sweet potatoes for rabbits, and bacon/cat food/sardines/marshmallows for raccoons and opossums.

Image: The PawHut trap cage placed on a paved patio next to a grey wall, demonstrating a typical outdoor placement scenario.

Maintenance and Care

• Cleaning: After each use, especially after capturing an animal, clean the trap thoroughly with a hose and mild detergent. Rinse well and allow to air dry completely to prevent rust and remove any lingering scents that might deter future captures.
• Storage: When not in use, collapse the trap for compact storage. Store it in a dry place to prevent corrosion.
• Inspection: Periodically inspect the trap for any signs of wear, damage, or rust. Ensure all moving parts, especially the trigger mechanism and door latches, operate smoothly. Lubricate if necessary with a non-toxic, animal-safe lubricant.

Troubleshooting

Specifications

Image: A diagram showing the dimensions of the trap cage: 100 cm length, 25 cm width, and 28 cm height.

Warranty and Support

For warranty information or technical support, please refer to the retailer's website or contact PawHut customer service directly. Contact details are typically available on the product packaging or the official PawHut website.

You can visit the PawHut store on Amazon for more products and information: PawHut Store