Pro Breeze 6L Compressor Dehumidifier PB-D-26 User Manual

1. Introduction

Thank you for choosing the Pro Breeze 6L Compressor Dehumidifier. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and keep it for future reference.

This dehumidifier is designed to reduce humidity levels in indoor spaces up to 15 m², helping to prevent mold, mildew, and condensation. Its compact design and portability make it suitable for various rooms, including bedrooms, offices, and laundry areas.

2. Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.

• Ensure the voltage indicated on the rating label matches your mains supply.
• Do not operate the appliance with a damaged cord or plug.
• Keep the appliance away from heat sources and direct sunlight.
• Do not immerse the appliance, cord, or plug in water or other liquids.
• Always unplug the appliance before cleaning, maintenance, or when not in use.
• This appliance is for indoor use only.
• Do not block air inlets or outlets.
• Keep children and pets away from the appliance during operation.

3. Product Overview

The Pro Breeze 6L Compressor Dehumidifier is a compact yet powerful unit designed for efficient humidity control.

Key Features:

• High Extraction Rate: Removes up to 6 liters of water per day.
• Large Water Tank: Features a 2-liter water tank with automatic shut-off when full.
• Continuous Drainage: Includes a drain hose for continuous operation without manual emptying.
• Humidity Sensor: Built-in sensor with LED display allows setting desired humidity levels (30-90%).
• Multiple Modes: Continuous, Automatic, and Laundry Drying modes.
• 24-Hour Timer: Programmable on/off timer for flexible operation.
• Energy Efficient: Designed for low power consumption.
• Portable Design: Compact size with 4 castor wheels for easy movement.

Product Diagram and Controls:

This image shows the main unit from the front, highlighting its compact design and control panel on top.

The control panel features an LED display showing current humidity, along with buttons for power, mode selection, timer, and humidity settings. The intelligent humidity sensor is integrated into this panel.

4. Setup

Unpacking:

1. Carefully remove the dehumidifier from its packaging.
2. Remove all packaging materials and dispose of them responsibly.
3. Inspect the appliance for any signs of damage. If damaged, do not use and contact customer support.

Placement:

• Place the dehumidifier on a firm, level surface.
• Ensure there is at least 20 cm (8 inches) of space around the air inlets and outlets for proper airflow.
• Avoid placing the unit near heat sources, in direct sunlight, or in areas prone to splashing water.
• The integrated castor wheels allow for easy movement between rooms.

The dehumidifier measures approximately 20.5 cm (width) x 25.6 cm (depth) x 43 cm (height), making it suitable for small spaces and easy to store.

5. Operation

Powering On/Off:

Plug the power cord into a suitable electrical outlet. Press the Power button on the control panel to turn the unit on or off.

Operating Modes:

The dehumidifier offers three operating modes to suit different needs:

The dehumidifier provides modes for continuous operation, automatic humidity control, and specific relative humidity settings.

• Continuous Mode: Ideal for rapid and efficient drying of laundry or when maximum dehumidification is required. The unit will operate continuously regardless of the humidity level.
• Automatic Mode: The dehumidifier adjusts its operation based on the ambient temperature to maintain a comfortable humidity level.
• Relative Humidity (RH) Mode: Allows you to set a specific target humidity level between 30% and 90%. The unit will operate until the desired humidity is reached, then pause to save energy, restarting if humidity rises.

Setting Desired Humidity:

In RH Mode, use the Humidity Setting buttons (usually Up/Down arrows) to adjust the target humidity level. The LED display will show the current room humidity and your set target.

24-Hour Timer:

The integrated 24-hour timer allows you to program the unit to turn on or off automatically after a set period (in 1-hour intervals). This feature is useful for energy saving and convenient operation.

The timer function allows you to schedule the dehumidifier to operate for a specific duration, enhancing convenience and energy efficiency.

Laundry Drying Function:

Utilize the Continuous Mode for efficient laundry drying. The powerful compressor and continuous operation help to dry clothes faster, reducing the need for heating or tumble dryers.

This image illustrates the dehumidifier's effectiveness in a laundry setting, speeding up the drying process for clothes.

6. Water Drainage

Emptying the Water Tank:

The dehumidifier features a 2-liter water tank. When the tank is full, the unit will automatically shut off, and an indicator light will illuminate. To empty:

1. Gently pull out the water tank from the front of the unit.
2. Carefully carry the tank to a sink or drain.
3. Empty the collected water.
4. Slide the empty tank back into the dehumidifier until it clicks into place. The unit will resume operation.

Continuous Drainage:

For extended operation without manual tank emptying, you can set up continuous drainage using the included drain hose.

1. Locate the continuous drain outlet on the back or side of the dehumidifier.
2. Remove the rubber stopper (if present).
3. Connect one end of the drain hose to the outlet, ensuring a secure fit.
4. Route the other end of the hose to a suitable drain point (e.g., a floor drain, large bucket, or sink). Ensure the hose is sloped downwards to allow gravity drainage and is free from kinks.

This image demonstrates how to remove the water tank and connect the continuous drain hose for hassle-free water disposal.

7. Maintenance

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your dehumidifier.

Cleaning the Air Filter:

The air filter should be cleaned every two weeks or more frequently depending on usage and air quality.

1. Turn off and unplug the dehumidifier.
2. Locate and remove the air filter (usually at the back or side of the unit).
3. Gently vacuum any dust or debris from the filter. For heavier dirt, wash the filter with warm, soapy water.
4. Rinse thoroughly and allow the filter to air dry completely before reinserting it into the unit.
5. Never operate the dehumidifier without the filter or with a wet filter.

Cleaning the Unit Exterior:

• Wipe the exterior of the dehumidifier with a soft, damp cloth.
• Do not use abrasive cleaners, waxes, or solvents, as these may damage the surface.
• Ensure no water enters the air vents or control panel.

Storage:

If storing the dehumidifier for an extended period:

1. Empty and clean the water tank.
2. Clean the air filter.
3. Ensure the unit is completely dry before storing.
4. Store the dehumidifier in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

Before contacting customer support, please refer to the following troubleshooting guide for common issues.

9. Specifications

This diagram illustrates the dehumidifier's internal structure, including the compressor and washable filter, emphasizing its low energy consumption of approximately 0.187 kWh.

10. Warranty and Support

For warranty information, technical support, or any questions regarding your Pro Breeze dehumidifier, please refer to the warranty card included with your purchase or visit the official Pro Breeze website.

You can also contact the seller, One Retail Group, for assistance.

Online Support: Pro Breeze Store on Amazon