Introduction
Thank you for purchasing the MCombo Oversized Swivel Recliner Chair with Ottoman, Model 4651. This chair is designed to provide comfort and support with its adjustable backrest, 360-degree swivel wood base, and matching ottoman. This manual contains important information regarding the safe assembly, operation, and maintenance of your new recliner chair. Please read it thoroughly before use and retain it for future reference.

Image: The MCombo Oversized Swivel Recliner Chair with Ottoman in Cream White, showcasing its design and matching components.
Safety Information
WARNING: Failure to follow these safety instructions may result in injury or damage to the product.
- The maximum weight recommendation for this chair is 330 lbs. Do not exceed this weight limit.
- Always assemble and use the chair on a stable, level surface to prevent tipping.
- Do not use the chair in a moving vehicle.
- Be aware that the chair does not recline to a completely flat position. The maximum recline angle is 145 degrees.
- Keep children and pets away from the chair during assembly to avoid injury.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Avoid standing on the chair or ottoman.
Parts List
Before beginning assembly, ensure all components are present and undamaged. If any parts are missing or damaged, please contact MCombo customer support.
- Chair frame
- Cushion (seat and backrest)
- Ottoman
- Screw pack (containing all necessary fasteners and tools)

Image: Diagram showing the product dimensions of the recliner chair and ottoman, along with the two shipping boxes labeled for Model 6151-4651.
Assembly Instructions
The MCombo recliner chair and ottoman come in two boxes with all necessary assembly tools and detailed instructions. It is recommended that two or more adults complete the installation, which typically takes approximately 30 minutes.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
- Assemble Chair Base: Follow the specific instructions provided in the screw pack for attaching the chair frame to the swivel wood base. Ensure all connections are secure.
- Attach Backrest: Connect the backrest to the seat frame. Pay close attention to the alignment and secure it with the provided hardware.
- Install Armrests: Attach the armrests to the chair frame. Ensure they are firmly in place.
- Assemble Ottoman: Connect the ottoman cushion to its base using the provided hardware.
- Final Check: Once assembled, gently test the chair and ottoman to ensure all parts are stable and securely fastened.
Refer to the detailed installation instructions included in the packaging for step-by-step diagrams and specific hardware usage.
Operating Instructions
Reclining Function
The chair features an adjustable reclining backrest that smoothly transitions from an upright 120-degree position to a relaxed 145-degree lounge angle. To recline, locate the recline lever (typically on the side of the chair) and pull it to release the backrest. Lean back gently to achieve your desired angle. To return to an upright position, push forward while engaging the lever.

Image: A diagram illustrating the adjustable recline angle of the chair, ranging from 120 to 145 degrees, with a person demonstrating the reclined position.
360-Degree Swivel
The sturdy wood base allows the chair to rotate freely in any direction without needing to move the entire chair. Simply apply gentle pressure with your feet or body to swivel the chair to your desired orientation.

Image: An animated diagram demonstrating the 360-degree swivel capability of the chair.
Ottoman Use
The included ottoman is designed to support your legs and feet, enhancing relaxation. It is separate and lightweight, allowing for easy repositioning to suit your comfort needs.

Image: The MCombo recliner chair in a living room, with the matching ottoman positioned for leg support.
Maintenance
Faux Leather Upholstery Care
The faux leather upholstery is designed for easy care. To clean, simply wipe the surface with a dry or slightly damp lint-free cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the material. For spills, blot immediately with a clean, dry cloth.

Image: Graphic highlighting the features of the faux leather upholstery: breathable, soft touch, and easy to clean.
General Care
- Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability.
- Keep the chair away from direct sunlight and heat sources to prevent fading and material degradation.
- Avoid sharp objects that could puncture or scratch the upholstery.
Troubleshooting
If you encounter any issues with your MCombo recliner chair, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels unstable or wobbly | Loose fasteners | Check and tighten all bolts and screws on the chair frame and base. Ensure the chair is on a level surface. |
| Reclining mechanism is stiff or not engaging | Mechanism obstruction or lubrication needed | Ensure no objects are obstructing the mechanism. Apply a silicone-based lubricant to moving parts if necessary (avoid oil-based lubricants on wood). |
| Squeaking noises during swivel or recline | Loose connections or friction | Tighten all assembly bolts. Apply a small amount of silicone lubricant to the swivel mechanism or pivot points. |
| Difficulty assembling parts | Incorrect alignment or missing hardware | Review the assembly instructions carefully. Ensure parts are correctly oriented. Verify all hardware is present. Contact customer support if parts are misaligned or missing. |
Product Specifications
Below are the key specifications for the MCombo Oversized Swivel Recliner Chair with Ottoman, Model 4651:
- Brand: MCombo
- Model Name: 6151-4651
- Color: Cream White
- Product Dimensions (Chair): 32.3"D x 30.7"W x 45.7"H
- Seat Height: 21.3 Inches
- Seat Depth: 21.3 Inches
- Chair Backrest Width: 23.2 Inches
- Arm Height: 26 Inches
- Seat Back Interior Height: 28 Inches
- Maximum Weight Recommendation: 330 lbs
- Recline Angle: 120° to 145°
- Base Movement: 360° Swivel
- Upholstery Material: Faux Leather
- Frame Material: Wood Base
- Recommended Uses: Office, Reading, Relaxing, Sleeping
- Assembly Time: Approximately 30 minutes (2+ adults recommended)
- Item Weight: 73.2 pounds

Image: A visual representation of the chair's 21.3-inch high seat, demonstrating its ergonomic design for taller individuals and a weight capacity of 350 lbs.
Warranty and Customer Support
MCombo is committed to providing quality products. While specific warranty details are not included in this manual, please retain your proof of purchase. For any questions, missing parts, or issues not covered in this manual, please contact MCombo customer support directly through the retailer where the product was purchased or visit the official MCombo website for support contact information.
MCombo products are certified by FSC, OEKO-TEX, and CertiPUR-US, ensuring quality and safety standards.

Image: Display of CertiPUR-US, OEKO-TEX, and FSC certifications, indicating the use of certified foam, fabric, and wood in MCombo products.





