Sunco Lighting DL_2BF6-WH-HO-2760K-4PK
Sunco 6 Inch LED Recessed Light Retrofit Manual
Model: DL_2BF6-WH-HO-2760K-4PK
Introduction
This manual provides instructions for the installation, operation, and maintenance of your Sunco 6 Inch LED Recessed Light Retrofit. This product features high brightness (1700 LM), selectable color temperature (2700K/3000K/4000K/5000K/6000K), dimmable functionality, and a baffle trim design. It is suitable for damp locations and UL rated.
Image: Sunco 6 Inch LED Recessed Light Retrofit emphasizing 1700 lumens brightness.
What's in the Box
- Sunco 6 Inch LED Recessed Light Retrofit (4 units)
- Mounting Hardware
- User Manual
Image: Sunco 6 Inch LED Recessed Light Retrofit (White, 4-pack).
Specifications
| Brand | Sunco Lighting |
| Model Number | DL_2BF6-WH-HO-2760K-4PK |
| Color | White |
| Material | Aluminum, Polycarbonate |
| Light Fixture Form | Recessed |
| Room Type | Bathroom, Bedroom, Kitchen |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Special Features | Dimmable |
| Light Source | LED |
| Voltage | 120 Volts |
| Wattage | 17 watts |
| Brightness | 1700 Lumen |
| Efficiency | 100 lumens per watt |
| Mounting Type | Recessed Mount |
| Installation Type | Flush Mount |
| Item Dimensions (L x W x H) | 7.3"L x 1.77"W x 7.3"H |
| Water Resistance Level | Water Resistant (Damp Rated) |
Setup and Installation
Before beginning installation, ensure the power to the fixture location is turned off at the circuit breaker.
1. Prepare the Light Fixture
- Select Color Temperature (CCT): Locate the CCT slider switch on the back of the light fixture. Choose your desired color temperature from the available options (2700K, 3000K, 4000K, 5000K, 6000K). This setting can be adjusted before or after installation.
- Attach Spring Clips: Secure the provided spring clips to the designated slots on the light fixture. These clips will hold the light in place within the recessed can.
Image: CCT selection switch on the back of the light.
Video: Overview of Sunco High Lumen Retrofit Lights, demonstrating features and installation steps. (Source: Sunco Lighting)
2. Install into Existing Recessed Can
- Remove Old Fixture: Carefully remove the existing bulb and trim piece from your recessed can light.
- Connect Adapter: Screw the E26 connector (provided) into the existing light bulb socket within the recessed can.
- Connect Light to Adapter: Plug the connector from the Sunco LED light into the E26 adapter.
- Insert Light: Gently push the light fixture upwards into the recessed can. The spring clips will compress and then expand to secure the light in place, flush with the ceiling.
- Restore Power: Once the light is securely installed, restore power at the circuit breaker.
Image: Installation diagram for the Sunco 6 Inch LED Recessed Light Retrofit.
Video: Overview of Sunco 6" Retrofit High Output, demonstrating installation and features. (Source: Sunco Lighting)
Operating Instructions
Dimmable Functionality
The Sunco 6 Inch LED Recessed Light is 10%-100% dimmable. Use a compatible dimmer switch (sold separately) to adjust the light output to your desired brightness level. This allows for creating various ambiances in your space.
Image: Customizable ambiance with dimmable lights.
Selectable Color Temperature (CCT)
The fixture offers five selectable color temperatures: 2700K (Soft White), 3000K (Warm White), 4000K (Cool White), 5000K (Daylight), and 6000K (Daylight Deluxe). Adjust the CCT switch on the back of the light to match your preference or the specific needs of the room.
Image: Room illustrating different selectable color temperatures.
Maintenance
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: This LED fixture has an integrated light source and does not require bulb replacement.
- Inspection: Periodically check the fixture for any signs of damage or loose connections.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose connection, faulty switch. | Check circuit breaker. Ensure all connections are secure. Test the switch. |
| Light flickers. | Incompatible dimmer, loose wiring, power fluctuations. | Ensure dimmer is LED compatible. Check wiring connections. Consult an electrician if power fluctuations are suspected. |
| Incorrect color temperature. | CCT switch set incorrectly. | Adjust the CCT slider switch on the back of the fixture to the desired setting. |
| Light is too dim/bright. | Dimmer setting, CCT setting. | Adjust the dimmer switch. Ensure CCT is set to a preferred brightness level (some CCTs may appear brighter or dimmer). |
Warranty and Support
Sunco Lighting provides a 7-year warranty for this product. For any questions, technical assistance, or warranty claims, please contact Sunco Lighting customer support. Our knowledgeable support specialists are based in the USA and are ready to assist you.
For more information, visit the official Sunco Lighting website: www.suncolighting.com
Image: Sunco Lighting certifications and 7-year protection.
Related Documents - DL_2BF6-WH-HO-2760K-4PK
 |
LED SPEC-SELECT Commercial Cans Installation Guide - Sunco Lighting Detailed installation instructions for the Sunco Lighting LED SPEC-SELECT Commercial Cans (Model 77119). Covers retrofit and new construction methods with wiring diagrams, specifications, and safety warnings. Features selectable wattage and CCT. |
 |
Sunco Lighting 2x2 LED Panel Light - Selectable CCT Installation Guide & Manual Comprehensive installation guide and manual for the Sunco Lighting 2x2 LED Ceiling Panel with Selectable CCT. Learn how to install recessed or suspended fixtures, wiring diagrams, safety warnings, and specifications. |
 |
Sunco Lighting 6" Slim Selectable White LED Light Install Guide and Manual Comprehensive installation guide and manual for the Sunco Lighting 6" Slim Selectable White LED Light, detailing components, easy installation steps, safety warnings, and technical specifications. |
 |
Sunco Lighting 2x2 LED Selectable Ceiling Panel Installation Manual Comprehensive installation guide for the Sunco Lighting 2x2 LED Selectable Ceiling Panel (PN22_DU-WH-4060K). Learn how to safely install and wire this energy-efficient, dimmable LED fixture with selectable wattage and color temperature options. |
 |
Sunco Lighting 4" Selectable Retrofit LED Installation Manual Comprehensive installation guide for the Sunco Lighting 4-inch Selectable Retrofit LED, covering components, step-by-step installation, compatible dimmers, technical specifications, safety warnings, and FCC compliance. |
 |
Sunco 2x2 LED Selectable Ceiling Panel Installation Manual This installation manual provides step-by-step instructions for the Sunco 2x2 LED Selectable Ceiling Panel, featuring 3 color temperature options (4000K/5000K/6000K), 40W power, 4400 LM output, and 0-10V dimming compatibility. Covers recessed and suspension mounting, wiring, and safety warnings. Includes product specifications and ETL certification. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.