OREiN Motion Sensor Outdoor Flood Light

Product Overview

The OREiN Motion Sensor Outdoor Flood Light is a high-performance security lighting solution designed for various outdoor applications such as front doors, garages, gardens, and stairs. This hardwired unit delivers 3500 lumens of bright, 5000K white light and features a highly sensitive 180° motion sensor with a 40ft detection range. Its dual light heads are 450° adjustable, allowing for broad and precise illumination.

Image: OREiN Motion Sensor Outdoor Flood Light with two adjustable heads and a central motion sensor.

Key Features:

• Bright Illumination: 3500LM brightness with 5000K light temperature, covering up to 3500 sq. ft.
• Advanced Motion Sensing: 180° detection angle and 40ft range for sensitive movement detection.
• Adjustable Light Heads: Dual heads with 3 flexible joints each, allowing 450° adjustment for wide coverage.
• Multiple Operating Modes: Dimmable Dusk-to-Dawn Mode, Security Mode, and Manual Mode.
• Durable & Weatherproof: IP65 waterproof rating, resistant to high temperatures, frost, UV, and breakage.
• Hardwired Installation: Designed for 110V-220V AC voltage, compatible with standard J-boxes.

Image: Illustration of the OREiN motion sensor light illuminating a large outdoor area, highlighting its 3500LM brightness and 3500 sq. ft. coverage.

Installation Guide (Hardwired)

This OREiN flood light is designed for hardwired installation and requires connection to a 110V-220V AC power source. It is not solar, battery, or plug-in powered. Ensure power is off at the circuit breaker before beginning installation.

Tools and Materials Required (Not Included):

• Screwdriver
• Wire Strippers
• Electrical Tape
• Standard Junction Box (2.75in or 3.5in)
• Ladder (if installing at height)

Installation Steps:

1. Prepare the Junction Box: Ensure you have a standard junction box (2.75in or 3.5in) installed at your desired mounting location.
2. Fix the Mounting Bracket: Attach the provided mounting bracket to the junction box using the screws. Ensure it is securely fastened.
   

   Image: Step-by-step illustration showing the mounting bracket being fixed to a junction box.

3. Connect Wires: Connect the live wire from your household wiring to the live wire of the flood light, and the neutral wire from your household wiring to the neutral wire of the flood light. Use the provided wire nuts to secure connections. This light is made of ABS insulation material and does not require a ground wire.
   

   Image: Diagram showing the hardwired connection process, including live and neutral wires, wire nuts, and the mounting bracket.

4. Mount the Light Fixture: Align the flood light fixture with the mounting bracket and secure it with the screws. Ensure the fixture is firmly attached to prevent movement.
5. Adjust Light Heads: Once mounted, adjust the two light heads to your desired angles. The 450° adjustment allows for versatile illumination.

Image: Examples of the OREiN flood light installed on a soffit (ceiling mount) and a wall (wall mount), demonstrating mounting flexibility.

Operating Modes and Sensor Settings

The OREiN Motion Sensor Outdoor Flood Light offers three distinct operating modes to suit various lighting needs, along with adjustable sensor settings for optimal performance.

Operating Modes:

1. Dimmable Dusk-to-Dawn Mode:

   In this mode, the light automatically turns on at 30% brightness when it gets dark. Upon detecting motion, the light will increase to 100% brightness. After a set delay time (adjustable), it will return to 30% brightness until dawn. This mode provides continuous low-level lighting for ambiance and security, with full brightness on demand.

   

   Image: Visual representation of the Dimmable Dusk-to-Dawn mode, showing the light at 30% brightness and then increasing to 100% upon motion detection.

2. Security Mode:

   In Security Mode, the light remains off during the day and at night until motion is detected. Once motion is sensed, the light turns on at 100% brightness. After the adjustable delay time, it will turn off completely if no further motion is detected. This mode is ideal for energy saving and providing light only when needed for security purposes.

   

   Image: Illustration depicting the Security Mode, where the light activates to 100% brightness only when motion is detected, then turns off.

3. Manual Mode:

   Manual Mode allows you to control the light with a standard wall switch. The light will remain on or off based on the switch's position, functioning like a traditional flood light. This mode bypasses the motion sensor and dusk-to-dawn features.

   

   Image: Illustration showing the Manual Mode, where the light is controlled by a physical switch, remaining on or off as desired.

Sensor Adjustment Dials:

The motion sensor features three adjustable dials to fine-tune its behavior:

• TIME: Adjusts how long the light stays on after motion is detected (delay time).
• SENS (Sensitivity): Controls the detection range of the motion sensor (up to 40ft).
• LUX (Light Sensitivity): Determines the ambient light level at which the sensor activates. This allows you to set whether the light turns on only in complete darkness or in dim conditions.

Image: Diagram illustrating the 180° motion detection range and the three adjustable dials (TIME, SENS, LUX) on the sensor for customization.

Maintenance and Durability

The OREiN Motion Sensor Outdoor Flood Light is constructed with durable materials designed for long-lasting outdoor performance with minimal maintenance.

Key Durability Features:

• IP65 Waterproof: Ensures reliable operation in various weather conditions, including rain and snow.
• Polycarbonate Material: Provides excellent resistance to high temperatures, frost, UV radiation, and breakage, contributing to a 50,000-hour lighting time.
• Anti-Aging Design: Engineered to resist degradation from environmental exposure.

Image: The OREiN flood light shown in a rainy environment, emphasizing its IP65 waterproof rating and ability to work in all weather.

General Maintenance:

To ensure optimal performance and longevity of your flood light:

• Periodically clean the light fixture and sensor lens with a soft, damp cloth to remove dirt, dust, or debris that may obstruct the sensor or reduce light output.
• Avoid using abrasive cleaners or solvents, as these can damage the finish or components.
• Regularly check the mounting and wiring connections to ensure they remain secure.

Troubleshooting

If you encounter issues with your OREiN Motion Sensor Outdoor Flood Light, please refer to the following common troubleshooting steps:

If the problem persists after attempting these solutions, please contact OREiN customer support for further assistance.

Specifications

Warranty and Support

OREiN stands behind the quality of its products. Your Motion Sensor Outdoor Flood Light comes with a comprehensive warranty and dedicated customer support.

Warranty Information:

This product is covered by a 24-month (2-year) manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Customer Support:

For any questions, technical assistance, or warranty claims, please contact OREiN customer support:

• Phone Support: 1-844-506-1530 (Available during working hours)
• Online Help: 24/7 online assistance is available. Please refer to the contact information provided on the product packaging or the official OREiN website.

We encourage you to contact us before initiating any returns, as many issues can be resolved quickly with our support team.