TESSAN Power Strip Tower Instruction Manual

1. Introduction

The TESSAN Power Strip Tower (Model TPS04-JP) is a compact and versatile power solution designed for various environments. It features 8 AC outlets, 1 USB-C port, and 2 USB-A ports, allowing simultaneous charging of multiple devices. The wide spacing between AC outlets accommodates large adapters without blocking adjacent ports. Its 1-meter extension cord and 45-degree thin plug facilitate easy cable management in tight spaces, preventing electrical fire hazards with an insulated plug base. Equipped with a master switch for convenient power control and overload protection, it automatically shuts off power in case of overload or overcurrent. Integrated 1700J surge protection safeguards connected electronics from lightning damage, indicated by a red lamp when active. Its low center of gravity and non-slip feet ensure stability.

The TESSAN Power Strip Tower (Model TPS04-JP) showing its compact design and multiple outlets.

2. Setup

2.1 Unpacking

Carefully remove the power strip from its packaging. Inspect the unit and its cord for any signs of damage. Do not use the product if it appears damaged.

2.2 Placement

Place the power strip on a stable, flat, and dry surface. Ensure it is away from water sources, heat, and direct sunlight. The compact tower design and low center of gravity help maintain stability.

A size comparison of the TESSAN Power Strip Tower (Model TPS04-JP) next to a smartphone, highlighting its compact dimensions (10x10x12.7 cm).

2.3 Connecting to Power Outlet

Plug the power strip's 1-meter extension cord into a standard wall outlet. The 45-degree thin plug is designed to fit in narrow spaces, allowing furniture to be placed closer to the wall without obstructing the outlet. The plug also features an insulated base to prevent electrical fire hazards.

Illustration of the 45-degree thin plug design, demonstrating how it allows furniture to be placed closer to the wall outlet without obstruction.

3. Operating Instructions

3.1 Powering On/Off

The power strip features a master switch to control power to all connected devices simultaneously. Press the switch to turn the power strip ON (green indicator light will illuminate) or OFF.

3.2 Connecting AC Devices

Plug your AC-powered devices into any of the 8 AC outlets. The outlets are spaced widely to accommodate larger power adapters without blocking adjacent ports.

3.3 Connecting USB Devices

Connect your USB-powered devices to the available USB ports. The power strip includes:

• 1 USB-C Port: Provides optimal charging for compatible devices (max 15W).
• 2 USB-A Ports: Provides optimal charging for compatible devices (max 12W).

The built-in smart IC in the USB ports detects and delivers the optimal current for your devices.

The TESSAN Power Strip Tower (Model TPS04-JP) with various devices connected, showcasing its 8 AC outlets, 1 USB-C port, and 2 USB-A ports for simultaneous charging.

Detailed view of the USB charging capabilities of the TESSAN Power Strip Tower (Model TPS04-JP), showing compatible devices for USB-A (max 12W) and USB-C (max 15W) ports.

3.4 Safety Features

The power strip is equipped with multiple safety features:

• Overload Protection: Automatically cuts power if the total current exceeds the maximum rating, preventing damage to connected devices and the power strip.
• 1700J Surge Protection: Protects connected electronics from voltage spikes caused by lightning or power fluctuations. A red indicator lamp illuminates when surge protection is active.
• Short-Circuit Protection: Prevents damage in case of a short circuit.
• Overcurrent Protection: Safeguards against excessive current flow.

Image demonstrating the 1700J surge protection feature of the TESSAN Power Strip Tower (Model TPS04-JP), with icons for short-circuit, overcurrent, and overload protection.

Diagram illustrating the low center of gravity design and non-slip rubber feet of the TESSAN Power Strip Tower (Model TPS04-JP), ensuring stability on surfaces.

Comparison showing how the tower design of the TESSAN Power Strip Tower (Model TPS04-JP) prevents plugs from blocking adjacent outlets, optimizing space compared to traditional strips.

4. Maintenance

To ensure optimal performance and longevity of your TESSAN Power Strip Tower, follow these maintenance guidelines:

• Cleaning: Disconnect the power strip from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use for extended periods, store the power strip in a cool, dry place away from direct sunlight and moisture.
• Inspection: Periodically check the power cord and plug for any signs of damage, such as fraying or exposed wires. If damage is found, discontinue use immediately and contact customer support.

5. Troubleshooting

5.1 No Power to Devices

• Check Master Switch: Ensure the master switch on the power strip is in the ON position (green indicator light should be illuminated).
• Check Wall Outlet: Verify that the wall outlet is functioning correctly by plugging in another device.
• Overload Protection: If the power strip automatically turned off, it might be due to an overload. Disconnect some devices, then press the master switch to reset the power strip.

5.2 Surge Protection Indicator (Red Lamp)

• Red Lamp On: A red lamp indicates that the surge protection feature is active and functioning normally. This means the power strip is protecting your devices from voltage spikes.
• Red Lamp Off: If the red lamp is off, it may indicate that the surge protection component has been compromised or has reached its end of life after absorbing a significant surge. While the power strip may still function as a multi-outlet, its surge protection capability might be reduced or non-existent. Consider replacing the unit for continued surge protection.

6. Specifications