Introduction
Thank you for choosing the TUTOTAK 3 Tier Printer Stand. This rolling cart is designed to provide a versatile and organized space for your printer and office essentials, featuring integrated power outlets and USB ports for convenience. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal use of your product.
Safety Information
- Read all instructions carefully before assembly and use.
- Keep small parts and packaging materials away from children.
- Ensure all connections are secure before placing heavy items on the stand.
- Do not overload the shelves beyond the specified weight capacity.
- Avoid exposing the power strip to moisture or liquids.
- Do not attempt to modify the power outlets or USB ports.
- Always unplug the stand from the wall outlet before cleaning or moving it for extended periods.
Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer service.
- Top Shelf (with integrated power strip)
- Middle Shelf
- Bottom Shelf
- Support Legs (4x)
- Locking Caster Wheels (2x)
- Non-locking Caster Wheels (2x)
- Assembly Hardware (screws, wrench)
- Instruction Manual
Setup and Assembly Instructions
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Check against the package contents list.
- Attach Caster Wheels: Insert the caster wheels into the designated holes at the bottom of the four support legs. Ensure the nut on the wheel shaft is properly aligned and screw it down firmly. You may need needle-nose pliers to fully tighten the nut if the provided tool is insufficient. Two of the wheels have locking mechanisms; position these on the front for easy access.
- Assemble Frame: Attach the support legs to the bottom shelf using the provided screws and wrench. Ensure all screws are tightened securely.
- Install Middle Shelf: Place the middle shelf onto the support legs at the desired height and secure it with screws.
- Install Top Shelf: Position the top shelf, which includes the power strip, onto the upper part of the support legs. Secure it with screws. Ensure the power cord is routed freely and not pinched.
- Final Check: Verify that all screws are tight and the stand is stable before use.
Operating Instructions
Using the Rolling Wheels
The printer stand is equipped with four caster wheels for easy mobility. Two of these wheels include a locking mechanism to secure the stand in place.
- To Move: Ensure the locking levers on the two locking wheels are in the 'unlocked' (up) position. Gently push the stand to its desired location.
- To Secure: Once the stand is in position, push down the locking levers on the two locking wheels until they click into the 'locked' (down) position. This will prevent the stand from moving.
Using the Integrated Power Outlets and USB Ports
The top shelf features a built-in power strip with 2 AC outlets and 2 USB ports.
- Connect to Power: Plug the stand's main power cord into a standard wall outlet.
- AC Outlets: Plug your printer, laptop, or other AC-powered devices into the 120V/12A AC outlets.
- USB Ports: Connect your USB-powered devices (e.g., smartphones, tablets) to the 5V/2A USB ports for charging.
Caution: Do not exceed the maximum electrical load capacity of the power strip. Avoid daisy-chaining multiple power strips.
Maintenance
- Cleaning: Wipe the stand with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish. Ensure the power strip is unplugged before cleaning.
- Tightening: Periodically check all screws and connections to ensure they remain tight and secure. Retighten if necessary.
- Wheel Care: Keep the caster wheels free of debris to ensure smooth rolling.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly after assembly. | Screws are not fully tightened. | Ensure all assembly screws are tightened securely. |
| Caster wheels do not roll smoothly. | Debris caught in wheels; wheels are locked. | Check for and remove any debris. Ensure locking levers are in the 'unlocked' position. |
| Power outlets/USB ports are not working. | Stand's main power cord is unplugged; device is faulty; power strip overloaded. | Verify the stand's power cord is securely plugged into a working wall outlet. Test the device in another outlet. Reduce the number of devices plugged into the power strip. |
| Difficulty installing caster wheels. | Incorrect installation method. | Ensure the nut on the wheel shaft is properly aligned with the leg hole and screw it down. Use needle-nose pliers if the provided tool is insufficient for initial tightening. |
Specifications
- Model: PS02BK001
- Dimensions: 15.7" L x 11.8" W x 23.6" H (for 3-tier model)
- Material: Engineered Wood
- Power Outlets: 2x AC Outlets (120V/12A)
- USB Ports: 2x USB Ports (5V/2A)
- Power Cord Length: 4.9 feet
- Weight Capacity (Top Shelf): Approximately 44 lbs (20 kg)
- Features: Rolling wheels (2 lockable), 3 tiers for storage
Warranty and Support
TUTOTAK stands behind the quality of its products. Every printer stand undergoes thorough and rigorous testing. If you encounter any issues or have questions regarding your product, please do not hesitate to contact our customer service team.
Our friendly and professional customer service will respond to your inquiries within 24 hours. Please reach out via email for assistance.
Contact Information:
- Refer to your purchase documentation or the TUTOTAK brand store on Amazon for specific contact details.