1. Introduction
This instruction manual provides essential information for the REMCO M24A (92-00) Automatic Transmission Overhaul Kit. This kit is designed to facilitate the rebuilding of compatible automatic transmissions. Please read this manual thoroughly before proceeding with any installation or maintenance.
2. Product Overview and Components
The REMCO M24A (92-00) Automatic Transmission Overhaul Kit includes a comprehensive set of components necessary for a transmission rebuild. These components are sourced from OEM suppliers to ensure compatibility and performance.
Figure 1: Contents of the REMCO M24A Automatic Transmission Overhaul Kit. The image displays various gaskets, seals, O-rings, and other small components, individually packaged and laid out, including a large transmission case gasket, several smaller gaskets, and various rubber seals and O-rings. Some packages are labeled with part numbers and descriptions like "1ST ACCUMULATOR O-RINGS" and "LOW HOLD ACCUMULATOR O-RINGS".
2.1. Kit Contents
The kit typically includes:
- Gaskets (e.g., transmission case gasket)
- Seals (e.g., oil seals, shaft seals)
- O-rings (e.g., for accumulators, various internal components)
- Other precision components required for a complete overhaul.
The specific part number for this kit is TED-002270.
3. Compatibility and Application
This overhaul kit is compatible with specific vehicle models and years. It is crucial to verify your vehicle's specifications before installation.
3.1. Compatible Vehicles
| Vehicle Model | Years | Engine Type |
|---|---|---|
| Civic (Japan built) | 1997 - 2000 | 1.6L / L4 |
| Civic (USA/Canada built) | 1996 - 2000 | 1.6L / L4 |
| Civic Coupe | 1992 - 1997 | 1.5L, 1.6L / L4 |
| Civic Del Sol | 1992 - 1997 | 1.5L, 1.6L / L4 |
Note: Always double-check the compatibility of this kit with your specific vehicle's make, model, and year before beginning any work.
4. Installation (Operating)
Installation of an automatic transmission overhaul kit requires specialized knowledge, tools, and experience. It is strongly recommended that this procedure be performed by a certified automotive technician or a professional with expertise in transmission repair.
4.1. General Steps (Professional Guidance Recommended)
- Preparation: Ensure the vehicle is safely secured and the transmission fluid has been drained.
- Removal: Carefully remove the transmission from the vehicle.
- Disassembly: Disassemble the transmission according to the vehicle manufacturer's service manual. Document the location and orientation of all components.
- Inspection: Inspect all internal components for wear, damage, or corrosion. Replace any worn parts not included in this kit as necessary.
- Component Replacement: Replace all gaskets, seals, and O-rings with the new components from this overhaul kit. Ensure proper seating and lubrication where specified.
- Reassembly: Reassemble the transmission following the manufacturer's specifications, paying close attention to torque values and clearances.
- Installation: Reinstall the transmission into the vehicle.
- Fluid Fill and Testing: Fill the transmission with the correct type and amount of fluid. Perform necessary diagnostic checks and road tests to ensure proper operation.
Refer to your vehicle's specific service manual for detailed, step-by-step instructions and torque specifications.
5. Maintenance
Proper maintenance of your automatic transmission is crucial for its longevity and performance. After an overhaul, adhere to the following general guidelines:
- Fluid Checks: Regularly check the transmission fluid level and condition. Use only the fluid type recommended by your vehicle manufacturer.
- Fluid Changes: Follow the vehicle manufacturer's recommended schedule for transmission fluid and filter changes.
- Inspection: Periodically inspect for leaks around the transmission case and seals. Address any leaks promptly.
- Driving Habits: Avoid harsh acceleration, sudden stops, and excessive towing beyond your vehicle's capacity, as these can stress the transmission.
6. Troubleshooting
If you experience issues after installing the overhaul kit, consider the following general troubleshooting steps. For complex problems, consult a professional technician.
6.1. Common Issues and Potential Causes
| Symptom | Possible Cause |
|---|---|
| Fluid Leaks | Improperly seated seals or gaskets, damaged components, incorrect torque. |
| Shifting Problems (Hard shifts, delayed shifts) | Low or incorrect fluid level, incorrect fluid type, internal component malfunction, electronic control unit (ECU) issues. |
| Unusual Noises | Worn bearings, damaged gears, insufficient lubrication. |
Always ensure proper fluid levels and types are used. If issues persist, professional diagnosis is recommended.
7. Specifications
- Product Name: Automatic Transmission Overhaul Kit
- Brand: REMCO
- Model Number: M24A
- Part Number: TED-002270
- Application: Honda Civic (various models/years, 1992-2000)
- Component Quality: OEM components from industry-leading suppliers.
8. Warranty and Returns
Information regarding product warranty is not explicitly provided. For return policies, please note the following:
- Returns are accepted only if the product is in its original, unopened packaging.
Please consult your point of purchase or the seller for specific warranty details and return procedures.
9. Support
For technical assistance, specific installation questions, or further product information, it is recommended to:
- Consult a certified automotive technician.
- Refer to the official service manual for your specific vehicle.
- Contact the seller or manufacturer directly for product-specific inquiries.
