Introduction
Thank you for choosing the VECELO Home Office Desk Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.
This ergonomic chair features a height-adjustable seat and footrest, a comfortable PU leather design, and 360-degree swivel functionality with smooth-rolling casters, making it suitable for various home office and study environments.
Safety Information
- Avoid letting children climb on the desk chair unsupervised.
- Ensure the chair is placed on even surfaces to prevent tipping.
- Regularly check for loose screws and tighten them as necessary to maintain stability.
- Do not exceed the maximum weight capacity of 330 pounds (150 kg).
- Avoid standing on the chair or using it as a step stool.
Package Contents
Please verify that all components are present before beginning assembly:
- 1 x Office Drafting Chair (Seat and Backrest Assembly)
- 1 x Accessory Kit (Hardware, Gas Lift, Base, Casters, Footrest Ring)
- 1 x Installation Instructions Manual
Setup and Assembly
Assembly typically takes approximately 15-30 minutes. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Attach Casters to Base: Insert the five casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
- Insert Gas Lift: Place the gas lift cylinder into the center hole of the assembled chair base.
- Install Footrest Ring: Slide the footrest ring over the gas lift cylinder. Secure it at your desired height using the adjustment knob on the footrest ring.
- Attach Seat to Gas Lift: Carefully align the center mechanism of the chair seat with the top of the gas lift cylinder. Press down firmly to secure the seat onto the gas lift.
Image: Heavy Duty Chair Base with Casters. This image shows the robust five-star base with smooth-rolling casters and the footrest ring attached to the gas lift.
Image: Premium Details of Chair Components. This image highlights the high-quality gas lift, solid and stable base, and 360-degree silent casters, which are key components for assembly.
Operating Instructions
1. Seat Height Adjustment
To adjust the seat height, locate the lever on the right side beneath the seat.
- To raise the seat: While standing, pull the lever upwards. The seat will rise automatically. Release the lever at the desired height.
- To lower the seat: While seated, pull the lever upwards. The seat will lower. Release the lever at the desired height.
The seat height can be adjusted from 32.28 inches to 40.16 inches.
2. Footrest Adjustment
The footrest ring can be adjusted vertically along the gas lift cylinder.
- To adjust the footrest: Loosen the knob on the footrest ring. Slide the footrest to your preferred height. Tighten the knob firmly to secure it in place.
3. Swivel Function
The chair is designed with a 360-degree swivel feature, allowing for easy rotation in any direction. Simply rotate the seat to change your orientation.
4. Mobility
The five smooth-rolling casters allow for effortless movement across various floor surfaces. Ensure the path is clear before moving the chair.
Image: Height Adjustment and Footrest Mechanism. This image illustrates the lever for seat height adjustment and the knob for footrest ring adjustment.
Image: Chair Movement under Desk. This image demonstrates the chair's mobility, showing it can be easily moved in and out from under a desk.
Maintenance
- Cleaning: Clean the chair with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the PU leather and other materials.
- Hardware Check: Periodically inspect all screws and bolts to ensure they are tight. Loose hardware can affect the chair's stability and safety.
- Caster Care: Keep the casters free of hair, dust, and debris to ensure smooth movement.
- Surface Protection: If using on delicate flooring, consider using a chair mat to prevent scratches from the casters.
Image: PU Leather Material Details. This image shows the texture of the PU leather, highlighting its waterproof and easy-to-clean properties.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles or feels unstable | Loose screws or uneven floor surface. | Check and tighten all assembly screws. Ensure the chair is on a flat, even surface. |
| Seat does not adjust height | Gas lift lever not engaged correctly or gas lift malfunction. | Ensure the lever is fully pulled up. If the issue persists, contact customer support for a replacement gas lift. |
| Casters do not roll smoothly | Debris caught in casters or damaged casters. | Remove any hair or debris from the caster wheels. If casters are damaged, they may need replacement. |
| Footrest slides down | Footrest adjustment knob is loose. | Tighten the footrest adjustment knob firmly after setting the desired height. |
Specifications
Image: Product Dimensions Diagram. This diagram provides detailed measurements of the chair, including height, width, and depth.
- Model Number: KHD-OC15-WHT-B
- Color: White
- Material: PU Leather, Metal Frame, Foam Fill
- Overall Dimensions (L x W x H): 22.83" x 22.83" x 32.28"-40.16" (58cm x 58cm x 82-102cm)
- Product Dimensions (D x W x H): 16.5"D x 20"W x 40"H (approximate, as per specifications)
- Seat Height Range: 20.08" - 27.95" (51cm - 71cm)
- Item Weight: 18.12 lbs (8.22 kg)
- Maximum Weight Capacity: 330 lbs (150 kg)
- Arm Height: 9.8 Inches
- Assembly Required: Yes
Warranty and Support
VECELO is committed to providing high-quality products and customer satisfaction.
- Free Replacement Service: VECELO offers a free replacement service for any defective parts or issues encountered with your product.
- Customer Service: Our dedicated customer service team is available 24 hours a day to assist you.
- Contact Us: If you have any problems with the product you received, please do not hesitate to contact us.
Customer Service Email: support@vecelo.com