HEYNEMO Display Cabinet with Door and LED Light

Introduction

This manual provides essential instructions for the assembly, operation, and maintenance of your HEYNEMO Display Cabinet Model ZTS018. Please read this guide thoroughly before beginning assembly or use to ensure safe and correct installation and to maximize the lifespan of your product.

Safety Information

• Read all instructions: Ensure you understand all steps before assembly.
• Two-person assembly recommended: For safety and ease of assembly, it is advisable to have two adults for installation.
• Keep children and pets away: Small parts can be a choking hazard.
• Use on a level surface: Place the cabinet on a stable, flat surface to prevent tipping.
• Wall anchoring: If wall anchoring hardware is included, it is strongly recommended to secure the cabinet to a wall to prevent tip-over injuries.
• Do not overload: Distribute weight evenly on shelves and do not exceed the cabinet's weight capacity.
• Electrical safety: For the LED lighting, ensure the power source matches the product's requirements. Do not expose electrical components to water.

Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Cabinet panels (top, bottom, sides, back)
• 3 Glass Shelves
• 1 Drawer assembly kit
• 1 Storage cabinet door
• LED light kit with power adapter
• Hardware pack (screws, dowels, cam locks, handles, hinges, shelf pins)
• Assembly tools (if provided, otherwise standard household tools are required)

Setup and Assembly Instructions

Estimated Assembly Time: 1-2 hours (with two people)

Tools Required (not included): Phillips head screwdriver, Hammer, Measuring tape (optional).

1. Unpack and Organize: Carefully remove all components from the packaging. Lay them out on a clean, soft surface (e.g., a blanket or cardboard) to prevent scratches. Identify each part using the provided parts list.
2. Assemble the Base Frame: Connect the bottom panel to the side panels using the designated hardware (e.g., cam locks and dowels). Ensure all connections are secure.
3. Install Back Panel: Attach the back panel to the assembled frame. This often involves small nails or screws. Ensure the cabinet is square.
4. Assemble and Install Drawer: Follow the specific instructions for assembling the drawer box and attaching the drawer slides to both the drawer and the cabinet frame. Insert the assembled drawer into its designated slot.
5. Install Storage Cabinet Door: Attach hinges to the door and then to the lower cabinet section. Adjust hinges as needed for proper door alignment. Attach the door handle.
6. Insert Glass Shelves: Place the shelf pins into the pre-drilled holes at your desired height within the upper display section. Carefully place the glass shelves onto the pins.
7. Install LED Lighting: Route the LED light strips or puck lights according to the instructions, typically along the inner top or sides of the display sections. Connect the wiring to the power adapter.
8. Final Checks and Placement: Ensure all screws are tightened and the cabinet is stable. If applicable, secure the cabinet to the wall using the anti-tip hardware.

This image shows the complete HEYNEMO Display Cabinet in white, featuring two upper display shelves with integrated LED lighting, a central drawer, and a lower storage cabinet with a decorative X-pattern door.

Operating Instructions

LED Light Operation

• Power Connection: Plug the LED light power adapter into a standard electrical outlet.
• Switching On/Off: Locate the inline switch on the LED light cable. Toggle the switch to turn the lights on or off.

Drawer and Door Use

• Drawer: Gently pull the handle to open the drawer. Push firmly to close until it is flush with the cabinet front.
• Door: Use the handle to open and close the lower storage cabinet door. Ensure it closes completely to protect contents.

Maintenance and Care

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
• Glass Shelves: Clean glass with a glass cleaner and a lint-free cloth.
• Hardware: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• LED Lights: If an LED light fails, contact customer support for replacement options. Do not attempt to repair electrical components yourself.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration of the cabinet finish.

Troubleshooting

• LED Lights Not Working:
  • Check if the power adapter is securely plugged into both the outlet and the LED cable.
  • Ensure the inline switch is in the 'ON' position.
  • Test the outlet with another device to confirm it has power.
• Drawer Sticks or Does Not Close Smoothly:
  • Verify that the drawer slides are correctly installed and aligned.
  • Check for any obstructions within the drawer tracks.
  • Ensure the drawer is not overloaded or unevenly weighted.
• Door Misalignment:
  • Adjust the hinges using a screwdriver. Most hinges allow for minor adjustments in multiple directions.
  • Ensure the cabinet is on a level surface.
• Cabinet Wobbles:
  • Ensure all assembly hardware is fully tightened.
  • Verify the cabinet is placed on a completely level floor. Use shims if necessary.
  • If applicable, ensure the anti-tip hardware is properly installed and secured to the wall.

Specifications

Warranty and Support

For warranty information, missing parts, or technical support, please refer to the contact information provided with your purchase or visit the official HEYNEMO website. Please have your model number (ZTS018) and purchase date ready when contacting support.