NEWQIDA 24V 2 Seater Ride-On Car Instruction Manual

1. Introduction

Thank you for choosing the NEWQIDA 24V 2 Seater Ride-On Car. This manual provides essential information for the safe assembly, operation, and maintenance of your new electric vehicle. Please read this manual thoroughly before use and retain it for future reference.

This ride-on car is designed for children aged 3 years and up, with a maximum load capacity of 110 lbs. It features a 24V battery, four 200W motors, EVA tires, LED lights, music capabilities, and spring suspension for a comfortable and enjoyable driving experience.

2. Safety Precautions

WARNING: To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water. Always wear shoes. Never allow more than 2 riders. This product is not a toy and should be used with caution.

• Always ensure children wear the provided seatbelts.
• Operate the vehicle only on flat, dry surfaces. Avoid sand, loose dirt, gravel, or wet areas.
• Do not allow children to stand in the vehicle while it is in motion.
• Keep hands, hair, and clothing away from moving parts.
• The remote control should be used by an adult to supervise and override child operation when necessary.
• Regularly inspect the vehicle for damage, loose parts, or worn components before each use.

3. Parts List

Before assembly, please ensure all parts are present and undamaged. Refer to the diagram below for identification.

Figure 3.1: Exploded view of the NEWQIDA 24V 2 Seater Ride-On Car components. Key parts include the windshield, steering wheel with horn/music, openable hood, headlights, front bumper, 13-inch front and rear EVA wheels, working lightbar, two seats with seatbelts, additional trunk, taillights, and working car doors.

4. Setup and Assembly

Follow these steps carefully for proper assembly. Adult assembly is required.

1. Unpacking: Carefully remove all components from the packaging. Place them on a clean, flat surface.
2. Wheel Installation: Attach each of the four EVA tires to the axles. Ensure they are securely fastened with the provided washers and nuts.
3. Battery Connection: Locate the battery compartment, typically under the seat or hood. Connect the battery terminals (red to red, black to black). Ensure a secure connection.
4. Steering Wheel Assembly: Slide the steering wheel onto the steering column until it clicks into place. Ensure it is firmly attached.
5. Lightbar and Accessories: Attach the working lightbar to the designated mounting points on the roll bar. Connect any other accessories as per the specific instructions in the included quick start guide.
6. Initial Charge: Before first use, fully charge the battery for 8-12 hours. Do not overcharge.

Figure 4.1: Illustration of the 24V 7Ah battery and the powerful 4x200W electric motors, highlighting their role in providing longer battery life and stronger power for various road surfaces.

5. Operating Instructions

5.1 Child Manual Operation

• Power On: Press the power button to turn on the vehicle.
• Start Driving: Press the foot pedal to accelerate. Release the pedal to brake.
• Steering: Use the steering wheel to control the direction of the vehicle.
• Music and Lights: Use the buttons on the dashboard to activate the built-in music and LED lights.

5.2 Parental Remote Control Operation

The 2.4G remote control allows parents to safely guide the vehicle, especially for younger children or during learning phases.

Figure 5.1: Detailed view of the remote control, indicating buttons for Forward, Backward, Switch Speed, Emergency Brake, Right, and Left turns.

1. Pairing the Remote:
   • Ensure the vehicle is turned off.
   • Press and hold the "▲" (Forward) and "▼" (Backward) buttons on the remote control simultaneously for 3 seconds. The indicator light on the remote will flash.
   • While the light is flashing, turn on the power switch of the car. The remote control indicator light will stop flashing and remain solid, indicating successful pairing.
2. Remote Control Functions:
   • Forward/Backward: Use the "▲" and "▼" buttons.
   • Turn Left/Right: Use the "◀" and "▶" buttons.
   • Speed Adjustment: Use the speed switch button to cycle through different speed settings.
   • Emergency Brake: Press the "P" button to stop the vehicle immediately. Press again to release.

5.3 Multimedia Features

The vehicle includes built-in music and Bluetooth connectivity for an enhanced experience.

• Built-in Music: Press the music button on the dashboard to play pre-loaded tunes.
• Bluetooth Connection: Activate Bluetooth on your mobile device and search for the vehicle's Bluetooth name (e.g., "NEWQIDA Car"). Pair the devices to play your own music or stories through the car's speakers.
• LED Lights: The headlights, taillights, and working lightbar can be turned on/off via dedicated buttons on the dashboard.

Figure 5.2: Illumination features of the ride-on car, showing the four working lightbar lights, two taillights, and two headlights.

6. Maintenance

Proper maintenance will extend the life of your ride-on car.

• Charging: Charge the battery after each use for 8-12 hours. Do not charge for more than 18 hours. If the vehicle will not be used for an extended period, charge the battery once a month to maintain its lifespan.
• Cleaning: Wipe the vehicle with a soft, damp cloth. Do not use abrasive cleaners or solvents. Avoid spraying water directly onto electrical components.
• Storage: Store the vehicle in a dry, cool place away from direct sunlight and moisture. Protect it from extreme temperatures.
• Inspection: Periodically check all screws, nuts, and electrical connections to ensure they are tight and secure. Inspect tires for wear and tear.

7. Troubleshooting

If you encounter issues, refer to the table below before contacting customer support.

8. Specifications

9. Warranty and Support

NEWQIDA is committed to providing premium products and services. For any questions, concerns, or warranty claims, please contact our customer support team.

While specific warranty details are not provided in this manual, please retain your proof of purchase for any potential claims. Our team is dedicated to exploring the needs of customers and ensuring satisfaction.

You can visit the official NEWQIDA store for more information and contact options: NEWQIDA Store on Amazon

Figure 9.1: The NEWQIDA brand logo, representing the manufacturer's commitment to quality toys.