SPEDWHEL Extended Mudguard Fender for Sealup Q22 Electric Scooter - Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the SPEDWHEL Extended Mudguard Fender, specifically designed for the Sealup Q22 Electric Scooter. Please read this manual thoroughly before installation to ensure correct assembly and safe use of your product.

Image 1.1: The SPEDWHEL Extended Mudguard Fender, showcasing its design and mounting brackets.

2. Safety Information

Always prioritize safety during installation and use. Failure to follow these instructions may result in damage to the product, the scooter, or personal injury.

• Ensure the scooter is powered off and stable before beginning any installation.
• Use appropriate tools for installation. Refer to the "Tools Required" section.
• Do not overtighten fasteners, as this may strip threads or damage components.
• Regularly inspect the mudguard and its mounting hardware for looseness or damage.
• If you are unsure about any step of the installation process, seek professional assistance.

3. What's in the Box

Carefully unpack the contents and verify that all items are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 1x Extended Mudguard Fender
• 2x Mounting Brackets
• Set of Screws and Washers

Image 3.1: All components included in the package: the mudguard, two mounting brackets, and a set of screws and washers for assembly.

4. Installation Guide

4.1 Tools Required

• Hex Key Set (Allen wrenches)
• Wrench (appropriate size for nuts)

4.2 Installation Steps

1. Prepare the Scooter: Ensure your Sealup Q22 Electric Scooter is turned off and placed on a stable surface. If there is an existing mudguard, carefully remove it.
2. Attach Brackets to Mudguard: Align the mounting brackets with the pre-drilled holes on the mudguard. Secure them loosely using the provided screws and washers. Do not fully tighten yet.


Image 4.1: The mudguard with its mounting brackets attached, illustrating the initial assembly stage before securing to the scooter.

3. Position on Scooter: Carefully position the assembled mudguard and brackets onto the designated mounting points on the rear of your Sealup Q22 scooter. The brackets are designed to fit specific attachment points near the rear wheel.
4. Secure to Scooter: Use the remaining screws and washers to attach the brackets to the scooter's frame. Ensure proper alignment before tightening.


Image 4.2: A side view of the extended mudguard fender fully installed on an electric scooter, demonstrating its position relative to the wheel.

5. Final Tightening: Once the mudguard is correctly aligned and positioned, securely tighten all screws and nuts. Do not overtighten.
6. Check Stability: Gently shake the mudguard to ensure it is firmly attached and does not wobble.

5. Operation

Once properly installed, the SPEDWHEL Extended Mudguard Fender operates passively by providing enhanced splash and debris protection for the rider and the scooter's components. No active operation is required.

6. Care and Maintenance

• Cleaning: Regularly clean the mudguard with a damp cloth to remove dirt, mud, and road grime. Avoid abrasive cleaners that may damage the finish.
• Inspection: Periodically check all mounting screws and nuts to ensure they remain tight. Vibrations from riding can cause fasteners to loosen over time.
• Damage Check: Inspect the mudguard for any cracks, bends, or other damage, especially after impacts or rough rides. Replace if significantly damaged.

7. Troubleshooting

Issue: Mudguard is loose or wobbles.

Solution: Check all mounting screws and nuts. Tighten them securely, ensuring not to overtighten. Verify that the brackets are correctly seated on the scooter's frame.

Issue: Inadequate splash protection.

Solution: Ensure the mudguard is correctly aligned over the wheel. While this is an extended mudguard, extreme conditions or specific riding styles may still result in some splash. Verify it is the correct model for the Sealup Q22 scooter.

8. Product Specifications

Image 8.1: Detailed dimensions of the mudguard fender, indicating measurements in centimeters for length, width, and height of various components.

9. Warranty and Support

For warranty information or technical support, please contact SPEDWHEL customer service through your purchase platform or the official SPEDWHEL website. Please have your purchase details and product model number (Sealup Q22 Extended Mudguard Fender) ready when contacting support.