Introduction
Thank you for choosing the AWQM Faux Marble Table Set. This 3-piece set includes one coffee table and two side tables, designed to enhance your living space with a modern aesthetic and practical functionality. This manual provides essential information for safe assembly, proper use, and effective maintenance of your new furniture.
Safety Information
Please read and understand all safety warnings and assembly instructions before beginning assembly. Failure to follow these instructions may result in injury or damage to the product.
- Sharp Edges: Exercise caution during assembly as some components may have sharp edges.
- Stability: Ensure all connections are securely tightened for optimal stability after assembly. Periodically check and re-tighten fasteners.
- Weight Capacity: Do not exceed the maximum weight recommendations. The coffee table supports up to 100 lbs, and each side table supports up to 80 lbs.
- Children and Pets: Keep small parts and packaging materials away from children and pets during assembly.
- Indoor Use Only: This furniture set is designed for indoor use only.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact AWQM customer support.
- 1 x Coffee Table (Faux Marble Top, Metal Frame)
- 2 x Side Tables (Faux Marble Tops, Metal Frames)
- Assembly Guide
- Installation Tool (Hex Key/Allen Wrench)
- All necessary hardware (screws, bolts, washers)
Image: Overview of the 3-piece table set, highlighting key features.
Setup and Assembly
Assembly is required for this table set. Please follow the steps below carefully. It is recommended to assemble on a soft, clean surface to prevent scratches.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface. Identify all components against the parts list in the included assembly guide.
- Assemble Coffee Table Frame: Attach the metal frame pieces together using the provided hardware and installation tool. Ensure all screws are finger-tightened initially.
- Attach Coffee Table Top and Shelf: Place the faux marble tabletop onto the assembled frame and secure it. Then, attach the lower shelf to the frame. Fully tighten all screws once the table is upright and stable.
- Assemble Side Table Frames: Repeat the frame assembly process for each of the two side tables.
- Attach Side Table Tops and Shelves: Secure the faux marble tops and shelves to the side table frames. Fully tighten all screws.
- Final Check: Ensure all screws are securely tightened and the tables are stable before use.
Image: Dimensions of the coffee table and side tables for placement planning.
Image: Detail of rubber foot pads designed to protect flooring.
Operating and Usage
The AWQM Faux Marble Table Set is designed for versatile use in your living room or apartment.
- Coffee Table: Ideal for serving beverages, holding remote controls, books, or decorative items. The lower shelf provides additional storage.
- Side Tables: Perfect as end tables next to sofas or chairs, nightstands in bedrooms, or accent tables for lamps, plants, and magazines. The multi-tier design offers ample storage.
- Placement: Position tables on a flat, stable surface. Avoid placing them in direct sunlight or near heat sources to prevent material degradation.
Image: The table set in a living room, demonstrating typical usage.
Maintenance
Proper care will ensure the longevity and appearance of your AWQM Faux Marble Table Set.
- Cleaning: Wipe with a dry cloth to remove dust. Clean spills immediately with a damp cloth. Avoid abrasive cleaners, harsh chemicals, or polishes that may damage the faux marble finish or metal frame.
- Protection: Use coasters under drinks and placemats under hot items to prevent stains and heat damage.
- Inspection: Periodically check all fasteners and re-tighten if necessary to maintain structural integrity.
Image: Illustration of the easy-to-clean faux marble surface.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly after assembly. | Screws are not fully tightened or table is on an uneven surface. | Ensure all screws are securely tightened. Move the table to a flat surface or use shims if necessary. |
| Parts do not align during assembly. | Incorrect orientation of parts or cross-threaded screws. | Review the assembly guide to ensure parts are oriented correctly. Loosen screws, realign, and re-tighten. Do not force parts. |
| Scratches on floor when moving tables. | Rubber foot pads are missing or damaged. | Ensure all rubber foot pads are properly installed. Avoid dragging tables; lift them when moving. |
Specifications
Image: Key product attributes and dimensions.
| Attribute | Detail |
|---|---|
| Brand | AWQM |
| Model Number | AFMT-WB |
| Color | White & Black |
| Material Type | Engineered Wood (MDF), Metal |
| Furniture Finish | Faux Marble (Laminated) |
| Coffee Table Dimensions (L x W x H) | 39" x 20" x 18" (39.37"L x 20.07"W x 17.91"H) |
| Side Table Dimensions (L x W x H) | 15.7" x 13.7" x 23.8" (15.75"L x 15.75"W x 23.81"H) |
| Item Weight | 41 Pounds (Total for set) |
| Coffee Table Weight Capacity | 100 Pounds |
| Side Table Weight Capacity | 80 Pounds (each) |
| Assembly Required | Yes |
| Recommended Uses | Tea time, home working, writing, nightstand, sofa table, storage for magazines and lamps. |
Warranty and Support
AWQM provides customer support for their products. For any questions regarding assembly, missing parts, or product defects, please refer to the contact information provided in your original packaging or visit the official AWQM website.
While specific warranty details are not provided in this manual, it is generally recommended to retain your proof of purchase for any warranty claims. Protection plans may also be available for purchase separately.
For further assistance, please contact AWQM customer service.