Introduction
This manual provides essential instructions for the safe and efficient operation of your Altec Lansing SoundRover View Portable Bluetooth Speaker. Please read this guide thoroughly before using the device and retain it for future reference. The SoundRover View is designed for portable entertainment, featuring a 14-inch 1080P display, powerful audio output, and versatile connectivity options.
What's in the Box
- Altec Lansing SoundRover View Speaker
- Microphone
- Carry Case
- Power Adapter
- User Manual
Product Features
- 14-inch 1080P Display: Integrated screen for video playback and visual content.
- 150W Peak Power: Delivers robust and clear audio performance.
- Extended Battery Life: Removable LiFePO battery provides up to 6 hours of video playback or 18 hours of audio playback.
- IPX4 Water Resistance: Protects against splashing water from any direction.
- Portability: Equipped with a built-in trolley handle and durable wheels for easy transport.
- Versatile Connectivity: Supports Bluetooth 5.0, HDMI, USB, Aux In, FM radio, screen mirroring, and dual microphone inputs.
Setup
1. Initial Charging
Before first use, fully charge the SoundRover View speaker. Connect the included power adapter to the speaker's charging port and then to a power outlet. The charging indicator will show the battery status.
2. Battery Installation/Removal
The SoundRover View features a removable and replaceable LiFePO battery. To install or remove the battery, locate the battery compartment on the side or rear of the unit. Open the cover, insert or remove the battery, and secure the cover. Ensure the battery is correctly oriented.
Figure 1: Removable battery for extended playtime.
3. Powering On/Off
Press and hold the Power button located on the control panel to turn the speaker on or off. The display will illuminate upon powering on.
Figure 2: Control panel with various input ports.
Operating Instructions
1. Bluetooth Pairing
- Ensure the speaker is powered on.
- Press the 'Source' button on the control panel until 'BT' (Bluetooth) mode is selected. The Bluetooth indicator will flash.
- On your mobile device, enable Bluetooth and search for available devices.
- Select "SoundRover View" from the list of devices.
- Once paired, the Bluetooth indicator will stop flashing and remain solid.
2. Using the 14-inch 1080P Display
The integrated 14-inch 1080P display can be used for playing videos from USB, HDMI input, or via screen mirroring from a compatible device. Use the navigation buttons on the control panel to select input sources and control playback.
Figure 3: The 14-inch HD display in use.
3. Wired Connectivity (HDMI, USB, Aux In)
- HDMI: Connect an HDMI cable from your source device (e.g., streaming stick, laptop) to the HDMI IN port on the speaker. Select HDMI as the source on the speaker.
- USB: Insert a USB drive containing audio or video files into the USB port. Select USB as the source.
- Aux In: Connect an audio device using a 3.5mm auxiliary cable to the Aux In port. Select Aux as the source.
4. Microphone Usage
The SoundRover View supports dual microphone inputs. Connect the included microphone(s) to the MIC IN ports. Adjust microphone volume using the dedicated controls on the speaker.
Figure 4: Storage for two wireless microphones.
5. Portability Features
Utilize the retractable trolley handle and durable wheels to easily move the speaker. Ensure the handle is fully extended and locked before moving. For stability, use the tie-downs if securing the speaker during transport.
Figure 5: Retractable trolley handle for easy transport.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Water Resistance: The speaker is IPX4 water resistant, meaning it can withstand splashes. Do not submerge the speaker in water. Ensure all port covers are securely closed when exposed to moisture.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Store the speaker in a cool, dry place when not in use for extended periods.
- Storage: Store the speaker in a dry environment, away from extreme temperatures and direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is depleted or not installed correctly. | Charge the speaker or ensure the battery is properly installed. |
| No sound from speaker. | Volume is too low, incorrect source selected, or device not paired. | Increase volume, select correct input source, or re-pair Bluetooth device. |
| Bluetooth pairing fails. | Speaker is not in pairing mode or too far from device. | Ensure speaker is in BT mode and within range (approx. 10 meters). Forget device on phone and re-pair. |
| Display is blank or not showing content. | Incorrect input source selected or no signal from connected device. | Verify the input source (HDMI, USB, Screen Mirroring) is correctly selected and the source device is active. |
Specifications
- Model Name: SoundRover View
- Model Number: IMT8300
- Brand: Altec Lansing
- Display: 14-inch 1080P
- Peak Power: 150W
- Battery Type: Removable LiFePO
- Battery Life: Up to 18 hours (audio), 6 hours (video)
- Water Resistance: IPX4
- Connectivity: Bluetooth 5.0, HDMI (In/Out), USB, 3.5mm Aux In, XLR (Mic In)
- Included Components: Speaker, Microphone, Carry Case
- Item Weight: 25 Pounds
- UPC: 021331053954
Warranty Information
Altec Lansing products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Altec Lansing website. Keep your proof of purchase for warranty claims.
Support
For technical assistance, troubleshooting not covered in this manual, or general inquiries, please contact Altec Lansing customer support. Contact information can typically be found on the official Altec Lansing website or on the product packaging.
