1. Introduction
Thank you for purchasing the Generic VIMLE 3-seat sofa-bed. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before use and retain them for future reference.
The VIMLE sofa-bed is designed for comfort and versatility, featuring high resilience foam cushions for excellent support and a durable construction that converts easily from a sofa to a bed.
2. Safety Information
- Always follow assembly instructions precisely to ensure structural integrity.
- Do not exceed the recommended weight capacity for seating or sleeping.
- Keep small parts away from children during assembly to prevent choking hazards.
- Ensure all fasteners are securely tightened before use and periodically check for looseness.
- Avoid placing the sofa-bed near open flames or heat sources.
- Use caution when converting the sofa to a bed and vice-versa to avoid pinching or injury.
3. Package Contents
Before beginning assembly, please ensure all components are present and undamaged. Refer to the separate assembly diagram for a detailed list of parts and hardware.
- Sofa frame components (backrest, armrests, seat base)
- Sofa cushions (seat and back)
- Sofa-bed mechanism and mattress
- Legs
- Assembly hardware (screws, bolts, washers, Allen key)
4. Setup and Assembly
Assembly is required for this product. It is recommended that two adults assemble the sofa-bed. Clear a spacious area and lay out all components before starting.
- Unpack Components: Carefully remove all parts from the packaging. Check against the parts list in the separate assembly guide.
- Attach Legs: Securely attach the legs to the base of the sofa frame using the provided hardware. Ensure they are tightened firmly.
- Assemble Frame: Connect the backrest and armrests to the seat base according to the assembly diagram. Use the appropriate bolts and an Allen key, ensuring all connections are snug.
- Install Sofa-Bed Mechanism: Integrate the sofa-bed mechanism into the frame. This typically involves attaching the metal frame that holds the mattress. Follow the specific instructions in the assembly guide for this critical step.
- Place Mattress and Cushions: Once the frame and mechanism are secure, place the mattress onto the bed frame. Position the seat and back cushions onto the sofa.
Figure 4.1: The VIMLE 3-seat sofa fully assembled, ready for use.
Figure 4.2: The VIMLE sofa-bed integrated into a living space, showcasing its design.
5. Operating Instructions (Sofa to Bed Conversion)
The VIMLE sofa-bed is designed for easy conversion. Follow these steps to transform your sofa into a comfortable bed:
- Clear the Sofa: Remove all cushions, pillows, and any other items from the sofa surface.
- Locate Pull Handle: Find the pull handle or strap, usually located at the front center of the seat base, beneath the seat cushions.
- Pull Out Bed Mechanism: Gently pull the handle upwards and outwards. The bed frame will begin to unfold from within the sofa. Continue pulling until the entire bed frame is extended and the legs are locked into place.
- Adjust Mattress: Ensure the mattress is flat and properly positioned on the extended bed frame.
To convert back to a sofa, reverse these steps: lift the bed frame slightly to unlock the legs, then push the frame back into the sofa until it is fully retracted and the seat cushions can be replaced.
Figure 5.1: Demonstrating the action of pulling out the bed mechanism from the sofa.
Figure 5.2: The VIMLE sofa-bed in its fully extended bed configuration.
6. Maintenance and Care
Proper care will extend the life and appearance of your VIMLE sofa-bed.
- General Cleaning: Vacuum regularly with a soft brush attachment to remove dust and loose particles.
- Spot Cleaning (Upholstery): The upholstery cleaning code is "W", indicating that only water-based cleaning agents should be used. Blot spills immediately with a clean, dry cloth. For stubborn stains, use a mild, water-based upholstery cleaner. Test on an inconspicuous area first. Do not saturate the fabric.
- Cushion Care: Fluff and rotate cushions periodically to maintain their shape and even out wear. The high resilience foam will help them regain their shape.
- Frame Care: Wipe the frame with a damp cloth as needed. Avoid harsh chemicals.
- Mechanism Care: Periodically check the sofa-bed mechanism for smooth operation. If it becomes stiff, a small amount of silicone-based lubricant can be applied to moving parts (avoiding fabric).
Figure 6.1: Detail of the Gunnared Medium Grey fabric and cushion stitching.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sofa-bed mechanism is stiff or difficult to operate. | Lack of lubrication; mechanism misaligned. | Apply a silicone-based lubricant to moving parts. Check for any obstructions or misaligned components. |
| Squeaking noises during operation or movement. | Loose fasteners; friction between metal parts. | Check and tighten all bolts and screws. Lubricate moving metal parts. |
| Cushions appear flattened or lose shape. | Normal wear; infrequent fluffing. | Fluff and rotate cushions regularly. The high resilience foam should help them recover. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | VIMLE 3-seat Sofa-bed |
| Brand | Generic |
| Color | Gunnared Medium Grey |
| Seating Capacity | 3 people |
| Sofa Dimensions (W x D x H) | 275 cm (108 ¼") x 98 cm (38 ⅝") x 83 cm (32 ⅝") |
| Bed Dimensions (L x W) | 200 cm (78 ¾") x 140 cm (55 ⅛") |
| Seat Height | 48 cm (18 ⅞") |
| Mattress Thickness | 12 cm (4 ¾") |
| Frame Material | Wood |
| Seat Fill Material | High resilience foam |
| Upholstery Cleaning Code | W (Water-based cleaner) |
| Assembly Required | Yes |
Figure 8.1: Detailed dimensional drawing of the VIMLE sofa-bed in both sofa and bed configurations.
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
For further assistance, please contact customer service through the retailer where the product was purchased.
