LAOPAO Automatic Foam Soap Dispenser

1. Introduction

Thank you for purchasing the LAOPAO Automatic Foam Soap Dispenser. This device provides a hygienic, touchless solution for dispensing foam soap, suitable for various environments such as kitchens and bathrooms. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Product Features

• Touchless Operation: Infrared sensor for automatic foam dispensing, promoting hygiene.
• Adjustable Foam Volume: Two levels of foam discharge based on hand distance from the sensor.
• Durable Construction: Made from stainless steel for anti-oxidation, anti-corrosion, and wear resistance.
• Fine Foam Generation: Produces rich, fine foam for effective cleaning and water saving.
• Automatic Cleaning Function: Integrated self-cleaning mode for easy maintenance.
• IPX5 Waterproof: Resistant to water splashes, suitable for wet environments.
• Rechargeable Battery: Built-in 1500 mAh battery, offering long usage time per charge via Type-C port.

3. Package Contents

• LAOPAO Automatic Foam Soap Dispenser (Model JS008)
• Type-C USB Charging Cable
• User Manual

4. Setup

4.1 Charging the Dispenser

1. Locate the Type-C charging port on the dispenser. It is protected by a waterproof plug.
2. Gently remove the waterproof plug.
3. Connect the provided Type-C USB cable to the charging port and a suitable USB power adapter (not included).
4. During charging, the indicator light will glow red. Once fully charged, the indicator will turn white.
5. After charging, ensure the waterproof plug is securely reinserted to maintain IPX5 water resistance.

Image: The LAOPAO Automatic Foam Soap Dispenser showing the Type-C charging port with a cable inserted. The power button is visible on top.

4.2 Filling with Soap

1. Twist the top part of the dispenser counter-clockwise to separate it from the soap reservoir.
2. If using foam soap, pour it directly into the reservoir.
3. If using liquid soap, dilute it with water at a ratio of 1 part soap to 3-5 parts water. Stir gently to mix.
4. Do not overfill the reservoir. The maximum capacity is 280 ml (9.5 fl oz).
5. Align the top part with the reservoir and twist clockwise to secure it.

Image: Two images showing the process of filling the dispenser. The left image shows liquid soap being poured into the reservoir, and the right image shows water being added to dilute the soap.

5. Operating Instructions

5.1 Power On/Off

• To power on, press and hold the power button on top of the dispenser for a few seconds until the indicator light flashes.
• To power off, press and hold the power button again for a few seconds.

5.2 Dispensing Foam

1. Place your hand under the nozzle. The infrared sensor will detect your hand.
2. The amount of foam dispensed can be adjusted by the distance of your hand from the nozzle:
• Small Amount: Place your hand closer to the nozzle. The indicator light will glow green.
• Large Amount: Place your hand further from the nozzle. The indicator light will glow white.
3. Remove your hand once the desired amount of foam is dispensed.

Image: Two side-by-side images demonstrating the two foam dispensing levels. The left image shows a small amount of foam with a green indicator, and the right image shows a larger amount of foam with a white indicator.

5.3 Automatic Cleaning Function

1. Ensure the dispenser is powered on.
2. Double-click the power switch. The indicator light will flash blue.
3. The dispenser will automatically release foam for 20 seconds to clean its internal components.
4. To stop the cleaning process prematurely, click the power switch once.

Image: The LAOPAO Automatic Foam Soap Dispenser dispensing foam into a glass during its automatic cleaning cycle.

6. Maintenance

6.1 Exterior Cleaning

• Wipe the exterior of the dispenser with a soft, damp cloth.
• Do not use abrasive cleaners or solvents.
• The dispenser is IPX5 waterproof, meaning it can withstand splashes, but should not be submerged in water.

Image: A hand holding the LAOPAO Automatic Foam Soap Dispenser under running water, illustrating its IPX5 waterproof capability.

6.2 Internal Cleaning

Utilize the automatic cleaning function as described in Section 5.3 to keep the internal components clear of soap residue.

7. Troubleshooting

• Dispenser not turning on: Ensure the battery is charged. Connect the Type-C cable and charge until the indicator turns white.
• No foam dispensed: Check if the dispenser is powered on. Ensure the soap reservoir is filled and the soap is diluted correctly (if using liquid soap). Clean the nozzle if it appears clogged.
• Indicator light not working: This may indicate a low battery or a malfunction. Try charging the device.
• Foam volume is inconsistent: Ensure your hand is placed consistently at the desired distance from the sensor for the chosen foam level.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact LAOPAO customer service directly. Keep your purchase receipt for warranty claims.