Introduction
This manual provides essential instructions for the installation, operation, and maintenance of your Aurlane LIFT UP 3 quarter-circle shower cabin. Designed with a modern aesthetic, this shower cabin features a white reinforced acrylic base, white tempered glass backgrounds, a black ABS hydro column, and matte black lacquered aluminum profiles. Please read these instructions carefully before proceeding with installation or use to ensure safe and optimal performance.
Figure 1: Front view of the Aurlane LIFT UP 3 shower cabin, showcasing its quarter-circle design, black profiles, and white base.
Setup and Installation
Proper installation is crucial for the functionality and longevity of your shower cabin. It is recommended that installation be performed by a qualified professional. Ensure the installation area is level, structurally sound, and has appropriate plumbing connections for hot and cold water, as well as drainage.
Pre-Installation Checks:
- Unpacking: Carefully unpack all components. Due to the size and weight of the packages, assistance may be required. Drivers are typically only authorized to unload, not carry goods inside.
- Component Verification: Check all parts against the packing list to ensure everything is present and undamaged.
- Space Requirements: Verify that the dimensions of your bathroom accommodate the shower cabin. Refer to the dimensions diagram below.
- Water Supply: Ensure hot and cold water lines are accessible and correctly positioned.
- Drainage: Confirm the floor drain is correctly located for the 60mm large flow drain fitting.
Figure 2: Detailed dimensions of the Aurlane LIFT UP 3 shower cabin. Overall dimensions are 85 x 85 cm. The height is adjustable from 210 to 235 cm. The shower tray height is 14 cm, and the door opening width is 48 cm.
Assembly Tips:
- Follow the detailed assembly instructions provided with the product packaging.
- Ensure all seals and gaskets are correctly seated to prevent leaks.
- The shower tray is reinforced white acrylic. Handle with care during positioning.
- The sliding doors are made of 5mm tempered glass, and the white backgrounds are 4mm tempered glass. Exercise caution to prevent breakage.
- The matte black lacquered aluminum frame should be assembled according to the instructions, ensuring stability.
Operation
Your Aurlane LIFT UP 3 shower cabin is designed for ease of use, offering a comfortable showering experience with its integrated features.
Using the Shower System:
Figure 3: Close-up of the matte black ABS hydro column, featuring the mechanical mixer, diverter, adjustable anti-limescale head shower, and multi-jet anti-limescale hand shower.
- Mechanical Mixer: Use the mechanical mixer tap to control water temperature and flow. Turn the handle to adjust the desired temperature.
- Head Shower: The anti-limescale head shower provides a rain effect. It is height-adjustable for personalized comfort.
- Hand Shower: The multi-jet anti-limescale hand shower offers various spray patterns. Select your preferred jet type using the selector on the hand shower.
- Diverter: A selector on the hydro column allows you to switch between the head shower and the hand shower.
- Sliding Doors: The tempered glass sliding doors operate smoothly. Use the matte black door handles for opening and closing.
- Storage: Utilize the matte black metal shelf for storing shower essentials.
Maintenance and Care
Regular cleaning and maintenance will preserve the appearance and functionality of your shower cabin.
Cleaning Instructions:
- Glass Panels: Clean tempered glass panels with a soft cloth and a non-abrasive glass cleaner. For anti-limescale features, simply wipe the nozzles to remove any buildup.
- Profiles and Hydro Column: Wipe matte black lacquered aluminum profiles and the ABS hydro column with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that can damage the finish.
- Shower Tray: Clean the reinforced acrylic shower tray with mild soap and water. Do not use abrasive sponges or strong chemical detergents.
- Drain: Periodically check and clean the 60mm large flow drain fitting to prevent blockages.
- General: After each use, rinse the cabin thoroughly to remove soap residue and prevent limescale buildup.
Preventative Measures:
- Avoid hanging heavy objects on the shower doors or frame.
- Do not use sharp objects near the glass or acrylic surfaces.
- Ensure proper ventilation in the bathroom to minimize mold and mildew growth.
Troubleshooting
If you encounter any issues with your Aurlane LIFT UP 3 shower cabin, refer to the common problems and solutions below. For complex issues, contact a qualified technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Improperly sealed joints, damaged seals, loose connections. | Check all seals and connections. Re-seal if necessary. Ensure the shower tray is level. |
| Low Water Pressure | Blocked shower head/hand shower nozzles, issues with household water supply. | Clean anti-limescale nozzles. Check household water pressure. |
| Doors Not Sliding Smoothly | Dirt or debris in tracks, worn rollers. | Clean door tracks thoroughly. Inspect rollers for damage and replace if needed. |
| Drainage Issues | Hair or debris blocking the drain. | Remove the drain cover and clear any obstructions. |
Specifications
Detailed technical specifications for the Aurlane LIFT UP 3 shower cabin.
- Model: LIFT UP 3 (CAB276)
- Type: Quarter-circle shower cabin
- Dimensions (L x W): 85 x 85 cm
- Height (Adjustable): 210 - 235 cm (Shower tray + walls + head shower)
- Shower Tray Height: 14 cm
- Wall Height: 196 cm
- Door Opening Width: 48 cm
- Frame Material: Matte black lacquered aluminum
- Sliding Doors: 5 mm tempered glass
- Back Panels: White 4 mm tempered glass
- Hydro Column: Matte black ABS
- Shower Tray: Reinforced white acrylic
- Drain Fitting: Matte black, 60 mm large flow
- Head Shower: Anti-limescale, height-adjustable
- Hand Shower: Multi-jet, anti-limescale
- Mixer: Mechanical mixer tap
- Door Handles: Matte black
- Shelf: Matte black metal
- Installation Type: Freestanding
- Door Style: Sliding doors
Warranty and Support
Aurlane provides a warranty for this product and offers customer support for any inquiries or issues.
- Warranty Period: 2 years warranty on AURLANE parts.
- Product Reference: CAB276 (Please provide this reference when contacting support).
- Further Information: For more technical information, assembly tips, and advice, please visit the official AURLANE manufacturer's website.