Jocisland BHB008 King Size Lift-Up Storage Bed Frame User Manual

1. Introduction

This user manual provides detailed instructions for the safe assembly, operation, and maintenance of your Jocisland King Size Lift-Up Storage Bed Frame. Please read this manual thoroughly before beginning assembly and retain it for future reference. Proper assembly and care will ensure the longevity and optimal performance of your bed frame.

Image 1.1: The Jocisland King Size Lift-Up Storage Bed Frame with the mattress platform raised, showcasing the ample under-bed storage area.

2. Important Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Always use caution when operating the hydraulic lift system. Ensure hands and fingers are clear of moving parts.
• Assemble the bed frame strictly according to the instructions to prevent instability or collapse.
• Be careful around sharp edges during assembly and use to avoid injury.
• Do not allow children to play on or around the hydraulic lift mechanism.
• Ensure all bolts and fasteners are securely tightened before use and periodically check for tightness.
• This bed frame is designed for use with a King size mattress. Do not exceed the recommended weight capacity.

3. Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Headboard (Upholstered Velvet Channel Tufted Wingback)
• Footboard
• Side Rails
• Hydraulic Lift Mechanism (including gas springs)
• Bed Slats and Supports
• Assembly Hardware (bolts, washers, nuts, etc.)
• Assembly Tools (Allen wrench, etc.)
• Installation Manual

Image 3.1: Key components of the hydraulic lift system, including the gas springs and anti-fall device.

4. Assembly Instructions

Assembly typically requires two people and approximately 1 hour. Follow the numbered parts and detailed instructions provided in the separate assembly guide included with your product. The following video demonstrates the installation of the hydraulic mechanism.

4.1. Hydraulic Mechanism Installation

Video 4.1: This video demonstrates the correct procedure for installing the hydraulic lift mechanism onto the bed frame.

Important Note: The hydraulic gas springs may require significant initial force to compress and extend. This is normal and indicates proper function. Once the mattress is placed on the platform, its weight will assist in the operation.

4.2. General Assembly Tips

• Lay out all components on a clean, soft surface to prevent scratches.
• Do not fully tighten all bolts until the entire frame is assembled to allow for adjustments.
• Ensure the headboard is securely attached to the side rails.
• The bed frame is designed to be used without a box spring. Place your mattress directly on the provided slats.

Image 4.2: A fully assembled Jocisland bed frame, ready for use.

5. Operating Instructions

The Jocisland bed frame features a hydraulic lift system for convenient access to under-bed storage.

5.1. Lifting the Mattress Platform

1. Remove any items from the mattress surface that might obstruct the lift.
2. Locate the hidden drawstring or handle at the foot end of the bed frame.
3. Firmly grasp the drawstring/handle and lift the mattress platform upwards. The hydraulic mechanism will assist in raising the platform smoothly.
4. Ensure the platform is fully raised and stable before accessing the storage area. The anti-fall device helps secure the platform in the open position.

Image 5.1: The spacious under-bed storage area, ideal for storing various household items.

5.2. Lowering the Mattress Platform

1. Ensure all items are safely within the storage compartment and do not obstruct the platform's descent.
2. Grasp the drawstring/handle and gently pull the platform downwards. Apply steady, even pressure.
3. Guide the platform down until it rests securely on the bed frame. Avoid letting it drop suddenly.

6. Care and Maintenance

• Cleaning: For the upholstered velvet surfaces, wipe with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Fasteners: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Hydraulic System: The hydraulic gas springs are designed for long-term use and generally require no maintenance. If the mechanism becomes stiff or difficult to operate, ensure no obstructions are present. Do not attempt to lubricate the gas springs unless specifically instructed by the manufacturer.
• General Care: Avoid dragging the bed frame when moving it; always lift to prevent damage to the frame or flooring.

7. Troubleshooting

8. Product Specifications

Image 8.1: Detailed dimensions of the Jocisland King Size Lift-Up Storage Bed Frame.

9. Warranty and Customer Support

For warranty information, please refer to the documentation included with your purchase. If you encounter any issues or require assistance with assembly or parts, please contact the seller, Sendornet, directly through your purchase platform. Most products come with a 90-day return policy.

For further assistance, you may visit the Jocisland Store on Amazon.