Introduction
This manual provides essential instructions for the safe and efficient use of your saschedross AC Adapter, designed as a replacement power supply for Xerox XG-90D and XG-91D 19-inch LCD monitors. Please read this manual thoroughly before installation and operation.
Product Components
The saschedross AC Adapter package includes the main adapter unit and a detachable AC power cord.

Image: Detachable AC power cord. This cord connects the adapter to a standard wall outlet.

Image: AC Adapter unit with key dimensions. The adapter body measures approximately 4.2 inches in length, 1.8 inches in width, and 1.2 inches in height. The total cable length from the wall plug to the monitor connector is approximately 10.6 feet, with the DC output cable being 3.7 feet and the AC input cable being 6.6 feet.
Setup Instructions
- Connect the AC Power Cord: Insert the 2-pin connector of the AC power cord firmly into the corresponding input port on the saschedross AC Adapter unit.
- Connect to Monitor: Plug the DC output connector from the AC Adapter into the power input port of your Xerox XG-90D or XG-91D LCD monitor. Ensure a secure connection.
- Connect to Power Outlet: Insert the two-prong plug of the AC power cord into a standard 110V AC wall outlet.

Image: AC Adapter connected to a wall outlet. The green indicator light on the adapter signifies that power is being supplied.
Once connected, the green LED indicator on the adapter unit should illuminate, indicating that power is being supplied.
Operating Instructions
The saschedross AC Adapter operates automatically once connected to a power source and your monitor. It provides a stable 12V DC output to power your compatible Xerox LCD monitor. The green indicator light on the adapter confirms active power delivery.
Maintenance
- Cleaning: Disconnect the adapter from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface of the adapter. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cables to prevent damage.
- Safety: Do not expose the adapter to water or excessive moisture. Do not attempt to open or repair the adapter, as this will void any potential warranty and may cause electrical hazard.
Troubleshooting
- No Power / Monitor Not Turning On:
- Ensure all cable connections are secure and fully inserted into their respective ports.
- Verify that the wall outlet is functional by testing it with another device.
- Check if the green LED indicator on the adapter is illuminated. If not, recheck connections or try a different outlet.
- Confirm that your monitor is compatible with this 12VDC 5Amp power supply.
- Adapter Overheating:
- Ensure the adapter is placed in a well-ventilated area and not covered.
- If overheating persists, disconnect the adapter immediately and contact support.
Specifications
| Input Voltage | 110V AC |
| Output Voltage | 12V DC |
| Output Current | 5 Amp |
| Connector Type (AC Cord) | 2-Pin |
| Compatible Devices | Xerox XG-90D, XG-91D 19" LCD Monitors |
| Adapter Body Dimensions (L x W x H) | 4.2 in x 1.8 in x 1.2 in (approximate) |
| Total Cable Length | 10.6 ft (approximate) |
Warranty and Support
For warranty information or technical assistance, please contact the seller directly through your purchase platform. Keep your purchase receipt or order number handy for faster service.