Tilta Khronos Ultimate Kit Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Tilta Khronos Ultimate Kit, designed for the iPhone 15 Pro Max. Please read this manual carefully before using the product to ensure proper function and longevity.

2. Package Contents

The Tilta Khronos Ultimate Kit includes the following components:

• Khronos Case for iPhone 15 Pro Max
• Khronos Cooling System for iPhone
• Khronos Focus PD Handle for iPhone
• Khronos Mini LED Panel (Daylight)
• Khronos ARCA Quick Release Adapter (38mm)
• Khronos Quick Release USB-C Hub
• Khronos Circular Wooden Handle
• Khronos Universal SSD Holder
• Khronos Quick Release Filter Tray for iPhone
• Khronos Magnetic FSND 0.6 Filter for iPhone
• Khronos Magnetic FSND 1.2 Filter for iPhone
• Khronos Magnetic Black Mist 1/4 Filter for iPhone
• Khronos Magnetic White Mist 1/4 Filter for iPhone

Figure 2.1: All components included in the Tilta Khronos Ultimate Kit.

3. Setup Guide

Follow these steps to assemble your Tilta Khronos Ultimate Kit:

3.1. Khronos Case Installation

1. Unlock the case by sliding the latch on the side and gently pushing up the top frame.
2. Carefully place your iPhone 15 Pro Max into the main body of the case.
3. Align the top frame and push down until it clicks into place. Secure the side latch.

Figure 3.1: Assembled Tilta Khronos Ultimate Kit.

3.2. Quick Release USB-C Hub Connection

1. Attach the Quick Release USB-C Hub to the bottom of the Khronos Case. Ensure the locking mechanism engages securely.
2. Connect the short USB-C cable from the hub to your iPhone's USB-C port.

3.3. Focus PD Handle Attachment

1. Press the release button on the Focus PD Handle.
2. Slide the handle onto one of the side mounting points of the Khronos Case until it clicks into place.
3. Connect the handle's power cable to the PD USB-C port on the Quick Release USB-C Hub.

3.4. Cooling System Attachment

1. Align the Khronos Cooling System with the MagSafe area on the back of the Khronos Case.
2. The magnetic connection will secure the cooling system. Ensure it is properly seated.

3.5. Mini LED Panel Attachment

1. Slide the Khronos Mini LED Panel into one of the cold shoe mounts on the Khronos Case.
2. Tighten the locking screw to secure the LED panel.

3.6. Filter Tray & Filters

1. Attach the Quick Release Filter Tray to the camera module area of the Khronos Case.
2. Magnetic FSND (Full Spectrum Neutral Density) or Mist filters can then be easily attached to the filter tray.

3.7. Universal SSD Holder & Circular Wooden Handle

1. The Universal SSD Holder can be attached to any available mounting point on the case or handles.
2. The Circular Wooden Handle can be attached to the opposite side of the Focus PD Handle for dual-hand operation, using the same mounting mechanism.

4. Operating Instructions

4.1. Powering On/Off & Bluetooth Pairing (Focus PD Handle)

1. To power on the Focus PD Handle, long-press the power button until the indicator lights illuminate.
2. Ensure Bluetooth is enabled on your iPhone. The handle should appear as "TELESIN_IP" in your Bluetooth devices list. Tap to pair.
3. To power off, long-press the power button until the indicator lights turn off.

4.2. Camera Controls (Focus PD Handle)

The Focus PD Handle offers enhanced camera control when used with compatible camera apps (e.g., Blackmagic Camera app):

• Zoom Lever: Adjusts camera zoom.
• Mode Dial: Rotates to switch between different camera modes (e.g., Photo, Video, Cinematic).
• Shutter/Record Button: Half-press to focus, full-press to capture a photo or start/stop video recording.
• FN Button: Customizable function button. Refer to your camera app settings for available assignments.

4.3. MagSafe Charging (Cooling System)

The Cooling System can wirelessly charge your iPhone via MagSafe. Ensure the cooling system is powered on and correctly aligned with the MagSafe area on the Khronos Case.

4.4. Using the Mini LED Panel

Press the power button on the Mini LED Panel to turn it on/off and cycle through different brightness levels or color temperatures.

4.5. Using Filters

Magnetic FSND and Mist filters can be quickly attached or detached from the Quick Release Filter Tray to adjust exposure and creative effects.

4.6. Mounting on Tripod

The ARCA Quick Release Adapter allows for quick mounting and dismounting of the entire kit onto compatible tripods or other support systems.

5. Maintenance

• Keep all components clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid exposing the kit to extreme temperatures or moisture.
• Regularly check all screws and connections to ensure they are secure.
• Store the kit in a protective case when not in use to prevent damage.

6. Troubleshooting

• Issue: Focus PD Handle not connecting via Bluetooth.
  Solution: Ensure the handle is powered on and within range. Forget the device in your iPhone's Bluetooth settings and attempt to re-pair.
• Issue: MagSafe charging not working.
  Solution: Verify the Cooling System is powered on and correctly aligned. Ensure no obstructions are between the cooling system and the iPhone's MagSafe area.
• Issue: Camera controls not responding.
  Solution: Confirm the Focus PD Handle is paired via Bluetooth and that you are using a compatible camera app (e.g., Blackmagic Camera app).

7. Specifications

• Product Dimensions: 10 x 10 x 10 inches (Assembled)
• Item Weight: 4.92 pounds (Total Kit)
• Item Model Number: TK-IP15-PMD-TW
• Compatible Devices: iPhone 15 Pro Max, Tilta Khronos Ecosystem Accessories
• UPC: 810153170631

8. Warranty and Support

Specific warranty details and support contact information are not provided in the current product data. Please refer to the manufacturer's official website or product packaging for comprehensive warranty terms and customer support contacts.