1. Introduction
Thank you for choosing the G-Homa R1152 Remote Controlled Outlet System. This system provides a convenient way to control your household appliances wirelessly. This manual provides essential information for the safe and efficient use of your new remote controlled outlets.
The G-Homa R1152 system includes five plug-in outlets and two remote controls, designed for ease of use and flexibility in managing your electronic devices.
Image 1.1: The G-Homa R1152 system, featuring five remote controlled outlets and two remote controls.
2. Safety Instructions
- Electrical Safety: Always ensure that the total power consumption of devices connected to a single outlet does not exceed 2300W (10A). Overloading can cause overheating and fire hazards.
- Indoor Use Only: These outlets are designed for indoor use in dry locations. Do not expose them to water, moisture, or extreme temperatures.
- Proper Grounding: Ensure the outlets are plugged into properly grounded wall sockets.
- Children and Pets: Keep the outlets and remote controls out of reach of children and pets.
- Disassembly: Do not attempt to disassemble or modify the outlets or remote controls. This will void the warranty and may pose a safety risk.
- Power-Off Memory: In case of a power outage, the outlets will remain in the OFF position when power is restored, preventing unexpected activation of connected devices.
- CE Certified: This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.
3. Package Contents
Verify that all items are present in your package:
- 5 x G-Homa Remote Controlled Outlets
- 2 x Remote Controls
- Batteries (CR2032) for remote controls (pre-installed or included separately)
4. Product Overview
4.1. Remote Controlled Outlet
- Power Socket: Connects to your appliance.
- Manual ON/OFF Button: Allows local control of the outlet.
- Indicator Light: Shows the ON/OFF status of the outlet.
- Learning Button: Used for custom pairing with remote controls.
4.2. Remote Control
- Master ON/OFF Button: Controls all paired outlets simultaneously.
- Channel ON/OFF Buttons (1-5): Each pair of buttons controls a specific paired outlet.
- Battery Compartment: Located on the back, for CR2032 battery.
Image 4.1: Overview of the G-Homa remote controlled outlet and remote control features.
5. Setup
5.1. Battery Installation (Remote Control)
The remote controls use CR2032 lithium coin cell batteries. If batteries are not pre-installed or need replacement:
- Open the battery compartment cover on the back of the remote control.
- Insert the CR2032 battery with the positive (+) side facing up.
- Close the battery compartment cover securely.
5.2. Initial Setup and Pre-pairing
The G-Homa outlets and remote controls are typically pre-paired at the factory for immediate use. Simply plug an outlet into a wall socket and connect your appliance. You should be able to control it using the corresponding channel buttons on the remote control.
5.3. Custom Pairing or Re-pairing
If you need to pair an outlet with a different remote channel, or if pairing is lost, follow these steps:
- Plug the G-Homa outlet into a wall socket.
- Press and hold the small learning button on the side of the outlet until its indicator light begins to flash slowly.
- While the indicator light is flashing, press the desired 'ON' button (e.g., 'ON-1', 'ON-2') on the remote control.
- The outlet's indicator light will flash rapidly and then turn off, indicating successful pairing.
- Test the pairing by pressing the 'ON' and 'OFF' buttons for that channel on the remote.
To unpair an outlet from a remote channel, follow steps 1 and 2, then press the desired 'OFF' button on the remote control. The light will flash rapidly and turn off, indicating successful unpairing.
Image 5.1: Demonstrating the pairing process between a remote control and an outlet.
Image 5.2: Flexible pairing options for controlling outlets with multiple remotes or vice versa.
6. Operation
6.1. Controlling Appliances with the Remote
- Individual Control: Press the 'ON' button for the corresponding channel (1-5) to turn on the paired appliance. Press the 'OFF' button for that channel to turn it off.
- Master Control: Press the master 'ON' button to turn on all paired outlets simultaneously. Press the master 'OFF' button to turn off all paired outlets simultaneously.
6.2. Manual Control
Each outlet has a manual ON/OFF button. Press this button to toggle the power state of the connected appliance directly at the outlet.
6.3. Operating Range
The remote controls operate using a 433.92 MHz RF signal, providing a range of up to 30 meters (approximately 100 feet) in open areas. The signal can effectively penetrate through walls and doors, allowing control from different rooms without direct line of sight.
Image 6.1: The G-Homa system offers a strong 30-meter signal that works through walls.
Image 6.2: Examples of household appliances that can be controlled with the G-Homa remote system.
7. Maintenance
7.1. Cleaning
To clean the outlets and remote controls, wipe them with a soft, dry cloth. Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the product or create an electrical hazard.
7.2. Battery Replacement (Remote Control)
If the remote control's range decreases or it becomes unresponsive, the battery may need replacement. Refer to Section 5.1 for battery installation instructions. Use only CR2032 batteries.
8. Troubleshooting
- Outlet not responding to remote:
- Check if the remote control battery is depleted. Replace if necessary.
- Ensure the remote is within the 30-meter operating range.
- Verify that the outlet is properly paired with the remote channel. If not, perform the custom pairing procedure (Section 5.3).
- Ensure the outlet is securely plugged into a live wall socket.
- Appliance not turning on when outlet is activated:
- Check if the appliance itself is switched on and functioning correctly.
- Ensure the appliance's power consumption does not exceed the outlet's maximum rating (2300W/10A).
- Interference with other devices:
- The G-Homa system is designed to be non-interfering. If you experience issues, try repositioning the outlet or remote.
- Outlets remain off after power outage:
- This is a safety feature. The outlets are designed to remain in the OFF position after a power interruption to prevent unexpected activation of connected devices. You will need to manually turn them ON using the remote or the button on the outlet.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | R1152 |
| Brand | G-Homa |
| Color | White |
| Material | Plastic |
| Operating Voltage | 230V~, 50Hz |
| Max Current Rating | 10 A |
| Max Power Load | 2300 W |
| RF Frequency | 433.92 MHz |
| Wireless Range | Up to 30 meters (approx. 100 feet) |
| Remote Control Battery | 2 x CR2032 (included) |
| Outlet Dimensions (L x W x H) | 30 x 40 x 50 mm (approx. 1.18 x 1.57 x 1.97 inches) |
| Connector Type | Plug-in |
| Switch Type | Push Button |
| Certifications | CE |
Image 9.1: Detailed dimensions of the G-Homa outlet and remote control.
10. Warranty and Support
The G-Homa R1152 Remote Controlled Outlet System comes with a 3-year warranty, covering defects in materials and workmanship under normal use. Additionally, G-Homa offers lifetime customer support for this product.
For warranty claims or technical assistance, please refer to the contact information provided with your purchase or visit the official G-Homa website.
