Introduction
With a capacity of 864Wh, 1000W inverter and 2000W power lifting, the BLUETTI AC70P portable power station is an ideal solution for powering essential devices during road trips, power outages, or any situation requiring reliable off-grid energy. It features fast charging capabilities, solar input, and smart control via the BLUETTI APP.
Image: The BLUETTI AC70P Portable Power Station, showcasing its compact design and various ports.
Package Contents
- BLUETTI AC70P portable power station
- AC charging cable
- Car charging cable
- Solar charging cable
- User manual
Product Overview
Front Panel
Image: Close-up view of the BLUETTI AC70P's front panel, highlighting the display and various ports.
The front panel features a clear display screen showing input/output wattage, battery percentage, and estimated runtime. It includes various output ports: DC/PV input (12V-58V/10A/500W), DC output (12V/10A), two USB-C 100W ports, and two USB-A 12W ports. For AC power, there are two 1000W AC outlets.
Top Panel
The top of the unit includes two wireless charging pads, each providing 15W output for compatible devices.
Side Panels
Both side panels feature ventilation grilles to ensure proper airflow and cooling during operation. It is important to allow adequate space around the unit for ventilation.
Setup
Unpacking
Carefully remove all components from the packaging. Inspect the power station and accessories for any signs of damage.
Initial Charge
Before first use, it is recommended to fully charge the AC70P. Connect the provided AC charging cable to a standard wall outlet. The unit can charge from 0-80% in just 45 minutes and reach 100% in 1.5 hours with AC input. Alternatively, you can use solar panels or a car charging cable.
Operating Instructions
Powering On/Off
Press and hold the main power button to turn the unit on or off. The display screen will illuminate upon activation.
Using AC Outlets
Press the 'AC' button to enable the AC output. Plug your AC-powered devices into the two 1000W AC outlets. The unit supports up to 2000W power lifting for certain resistive loads.
Using DC Outlets
Press the 'DC' button to enable the DC output. Utilize the 12V/10A DC output, or the USB-C (100W) and USB-A (12W) ports to charge your compatible devices.
Power Lifting Mode
The Power Lifting mode allows the AC70P to handle high-wattage resistive loads up to 2000W. This feature is ideal for appliances with high startup power requirements. Refer to the BLUETTI APP for detailed settings and activation.
UPS Functionality
The AC70P features an Emergency UPS function with a 0.02S switching time, ensuring that connected devices continue to run without interruption in the event of a power failure.
Charging Methods
AC Wall Charging
Connect the AC charging cable to the unit's AC input port and then to a wall outlet. The unit supports up to 950W AC input for rapid charging.
Solar Charging
Connect compatible solar panels (max. 500W) to the DC/PV input port using the provided solar charging cable. The AC70P can be fully charged in approximately 1.9-2.4 hours with optimal solar input.
Image: The BLUETTI AC70P connected to a solar panel for charging in an outdoor setting.
Car Charging
Use the car charging cable to connect the AC70P to your vehicle's 12V/24V cigarette lighter port. The unit can be fully charged in 4-5 hours via car socket.
Image: The BLUETTI AC70P being charged inside a car using the car charging cable.
Maintenance
The BLUETTI AC70P utilizes a durable LiFePO4 battery, rated for over 3000 charge cycles, maintaining 80% of its original capacity. For optimal battery life, it is recommended to fully charge the unit at least once every three to six months if not in regular use.
Troubleshooting
If the unit is not powering on, ensure it is adequately charged. Check all cable connections for secure fit. For specific error codes or unexpected behavior, refer to the BLUETTI APP's diagnostic features or consult the full user manual for detailed troubleshooting steps.
Specifications
| Feature | Detail |
|---|---|
| Brand | BLUETTI |
| Model Name | AC70P |
| Battery Capacity | 864Wh LiFePO4 |
| Rated AC Output | 1000W (2000W Power Lifting) |
| AC Output Voltage | 110 Volts |
| Total Power Outlets | 2 AC Outlets, 2 USB-C, 2 USB-A, 1 Car Port, 2 Wireless Charging Pads |
| Max. AC Input | 950W |
| Max. Solar Input | 500W |
| UPS Switching Time | 0.02S |
| Charge Cycles | 3000+ to 80% capacity |
| Item Weight | 23.6 Pounds |
| Product Dimensions | 12.4"L x 8.2"W x 10.1"H |
| Included Components | AC70P Power Station, AC charging cable, car charging cable, solar charging cable, user manual |
Warranty and Support
The BLUETTI AC70P comes with a 5-Year Coverage. For any product inquiries, technical assistance, or warranty claims, please contact BLUETTI customer support. Their widespread sales and after-service networks are available to assist you.
