Present Time Leitmotiv Bear LED Table Lamp

1. Introduction

Thank you for choosing the Present Time Leitmotiv Bear LED Table Lamp. This wireless LED lamp is designed to provide ambient lighting and is suitable for various indoor settings, including children's rooms. This manual provides essential information for the safe and efficient use of your lamp.

2. Safety Instructions

• Read all instructions before use and retain them for future reference.
• This product is for indoor use only. Do not expose to rain or moisture.
• Do not attempt to disassemble or modify the lamp. This may void the warranty and pose a safety risk.
• Use only the specified battery type and ensure correct polarity when inserting batteries.
• Remove batteries if the lamp will not be used for an extended period.
• Keep batteries out of reach of children.
• Clean the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Package Contents

Please check the package for the following items:

• 1 x Leitmotiv Bear LED Table Lamp

Note: Batteries are not included and must be purchased separately.

4. Setup

1. Insert Batteries: Locate the battery compartment, typically at the base of the lamp. Open the compartment cover. Insert the required batteries (e.g., AA or AAA, refer to specifications) ensuring correct polarity (+/-). Close the compartment cover securely.
2. Placement: Place the lamp on a stable, flat surface. Ensure it is not near sources of heat or moisture.

5. Operating Instructions

1. Power On/Off: Press the power button located on the front of the lamp (on the bear's belly) to turn the lamp on. Press the button again to turn the lamp off.

6. Maintenance

• Cleaning: Wipe the lamp surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or harsh chemicals.
• Battery Replacement: When the light dims or stops working, it is time to replace the batteries. Follow the instructions in the 'Setup' section to replace them. Dispose of used batteries responsibly according to local regulations.

7. Troubleshooting

• Lamp does not turn on:
  • Check if batteries are inserted correctly with the correct polarity.
  • Replace old or depleted batteries with new ones.
  • Ensure the battery compartment cover is securely closed.
• Light is dim:
  • Batteries may be low. Replace them with new ones.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.