VASAGLE Bar Table with Power Outlets

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your VASAGLE Bar Table with Power Outlets. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation.

Image: VASAGLE Bar Table with Power Outlets in Ebony Black, showcasing its design and functionality.

Safety Information

WARNING: Failure to follow these safety instructions may result in injury or damage to the product.

• Always assemble according to the instructions provided.
• Do not exceed the maximum weight limit of 220 lb (100 kg) to ensure stability and prevent accidents.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Keep small parts away from children during assembly.
• Place the table on a level surface to prevent tipping.
• Do not place hot items directly on the surface without protection.
• Avoid exposing the table to excessive moisture or direct sunlight for prolonged periods.

Package Contents

Before beginning assembly, please verify that all parts listed below are present and undamaged.

• 1 x Bar Table (Part A)
• 1 x Top Panel (Part B)
• 1 x Side Panel with Power Strip Cutout (Part C)
• 1 x Side Panel (Part D)
• 1 x Back Panel (Part E)
• 2 x Long Side Rails (Part F)
• 1 x Horizontal Support Bar (Part G)
• 2 x Short Side Rails (Part H)
• 2 x Leg Frames (Part I)
• 2 x Hooks (Part J)
• 1 x Non-woven Fabric Drawer (Part K)
• 1 x Drawer Bottom Panel (Part L)
• 1 x Power Strip (Part M)
• 4 x Screws (Type 1)
• 8 x Screws (Type 2)
• 10 x Screws (Type 3)
• 26 x Screws (Type 4)
• 10 x Screws (Type 5)
• 2 x Screws (Type 6)
• 16 x Wooden Dowels (Type 7)
• 8 x Cam Lock Bolts (Type 8)
• 8 x Cam Locks (Type 9)
• 4 x Adjustable Feet (Type 10)
• 1 x Allen Key (Type 11)
• 1 x Screwdriver (Type 12)
• 23 x Stickers (Type 13)
• 1 x Instructions Manual

Image: Overview of the bar table with key dimensions and components labeled, including the movable drawer and power strip.

Setup and Assembly

Follow these steps carefully to assemble your bar table. An assembly video is also provided for visual guidance.

Assembly Video Guide

Step-by-Step Assembly Instructions

1. Assemble the Frame Base: Attach the adjustable feet (10) to the bottom of the two leg frames (I). Connect the horizontal support bar (G) between the two leg frames (I) using screws (4). Loosely tighten the screws at this stage to allow for adjustments.
2. Attach Top Panel: Place the top panel (B) onto the assembled leg frames (I). Secure it using screws (4) and wooden dowels (7). Ensure the holes for the power strip are correctly oriented on one side. Loosely tighten these screws.
3. Install Side Panels: Insert wooden dowels (7) into side panels (C and D). Attach side panels (C and D) to the top panel (B) and the leg frames (I) using screws (5). Make sure panel C, which has the cutout for the power strip, is facing outwards. Loosely tighten these screws.
4. Install Back Panel: Attach the back panel (E) to the top panel (B) and the side panels (C and D) using wooden dowels (7) and screws (1).
5. Assemble Bottom Shelf: Attach the bottom shelf (A) to the leg frames (I) using screws (3) and cam lock fasteners (8, 9).
6. Install Power Strip: Secure the power strip (M) into the designated cutout on panel C using screws (6).
7. Final Tightening: Once all components are in place, adjust the table to ensure it is level and stable. Fully tighten all previously loosely tightened screws using the provided Allen key (11) and screwdriver (12).
8. Apply Stickers: Cover visible screw holes with the provided stickers (13) for a clean finish.
9. Assemble and Insert Drawer: Assemble the non-woven fabric drawer (K) and insert the bottom panel (L). Place the assembled drawer into the designated compartment.
10. Attach Hooks: Secure the two hooks (J) to the side of the table as desired.

Features and Operating Instructions

Integrated Power Outlets

The bar table includes a built-in charging station with 2 AC outlets (125V/12A) and 2 USB ports (5V/2A). The 6.6 ft long power cord allows for flexible placement. Simply plug the table's power cord into a wall outlet to activate the charging station. Use the AC outlets for larger electronics and the USB ports for charging mobile devices.

Image: Detail of the power strip with two AC outlets and two USB ports, ready for device charging.

Movable Storage Drawer

The table features a non-woven fabric drawer (11.7" x 14.2" x 3") that can be moved within the large open compartment or removed entirely. This provides versatile storage for small items, office supplies, or personal belongings. To move the drawer, simply lift it out and place it in your desired position within the open space.

Image: The movable drawer shown in different positions within the table's storage compartment, highlighting its flexibility.

Practical Side Hooks

Two side hooks are included, offering a convenient place to hang items such as charging cables, headphones, or small bags. These hooks help keep your essentials organized and within easy reach.

Image: Headphones and a small bag hanging on the side hooks, demonstrating their practical use.

Adjustable and Protective Feet

The table is equipped with adjustable feet. These allow you to stabilize the high top table on slightly uneven surfaces, ensuring it remains steady. Additionally, they help prevent scratches on your floor. To adjust, simply twist the feet clockwise or counter-clockwise until the table is level.

Image: A close-up view of the adjustable feet, illustrating their function for stability on uneven floors.

Maintenance

• Cleaning: Wipe the table surface with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Spills: Clean up spills immediately to prevent staining, especially on the engineered wood surface.
• Stability Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
• Power Strip Care: Ensure the power strip is kept dry. Do not overload the outlets.

Troubleshooting

Specifications

Warranty and Support

Your VASAGLE Bar Table is covered by a return policy. For specific warranty details, please refer to the documentation included with your purchase or contact the seller directly.

• Return Policy: 30-day easy returns.
• Manufacturer: VASAGLE
• Seller: SONGMICS HOME US
• For customer support, please visit the SONGMICS HOME US seller page on Amazon.