Lemorele R100 Plus-RX
Contents
Lemorele R100 Plus-RX Wireless HDMI Audio Video Receiver User Manual
Model: R100 Plus-RX | Brand: Lemorele
1. Product Overview
The Lemorele R100 Plus-RX is a wireless HDMI audio and video receiver designed to extend Full HD 1080P HDMI signals over long distances. Equipped with a dual antenna and high-speed 5.8G transmission, it ensures a strong, fast, and stable video signal. Utilizing WiFi transmission technology, the signal can be wirelessly extended up to 200 meters in an open field, providing enhanced signal strength and excellent anti-interference performance. This receiver is specifically designed to be paired with the Lemorele R100 Plus transmitter (TX).
2. Package Contents
Please verify that all items listed below are included in your package:
- 1 x Lemorele R100 Plus-RX Wireless HDMI Receiver
- 1 x Power Adapter
- 1 x 0.5m HDMI Cable
- 1 x Micro to HDMI Adapter
- 1 x Mini HDMI to HDMI Adapter
- 1 x 4400 mAh Battery
- 1 x USB to USB C Power Adapter
- 1 x User Manual

Figure 2.1: Contents of the Lemorele R100 Plus-RX package, including the receiver, battery, cables, adapters, and power supply.
3. Setup Guide
3.1 Initial Setup
- Charge the Battery: Before first use, fully charge the included 4400 mAh battery using the provided USB to USB C power adapter.
- Connect Power: Connect the power adapter to the receiver's power input. Alternatively, the receiver can be powered by the charged 4400 mAh battery.
- Connect to Display: Use an HDMI cable to connect the HDMI OUT port of the R100 Plus-RX receiver to the HDMI IN port of your display device (e.g., TV, projector, monitor).
- Power On: Press the power button on the receiver to turn it on. The indicator lights should illuminate.
3.2 Pairing Instructions
The R100 Plus-RX receiver must be paired with a compatible Lemorele R100 Plus transmitter (TX) for operation. Please note that this receiver is exclusively compatible with the Lemorele R100 Plus transmitter model.
- Ensure both the R100 Plus-TX transmitter and R100 Plus-RX receiver are powered on and within close proximity for initial pairing.
- Refer to the R100 Plus transmitter's manual for specific pairing button locations and procedures. Typically, a pairing button on both devices needs to be pressed simultaneously or in sequence.
- Once successfully paired, the indicator lights on both devices will confirm the connection, and the receiver will begin displaying the signal from the transmitter.

Figure 3.1: The Lemorele R100 Plus-RX receiver, showing its main unit, detachable battery, and included HDMI adapters.
4. Operating Instructions
4.1 Basic Operation
After successful setup and pairing, the R100 Plus-RX receiver will automatically receive the HDMI signal from the paired R100 Plus-TX transmitter. Ensure your display device is set to the correct HDMI input source.
- Signal Indicator: Observe the signal indicator lights on the receiver. A solid light typically indicates a stable connection.
- Battery Status: If operating on battery power, monitor the battery indicator lights to ensure sufficient charge. Recharge the battery when low.
4.2 Multi-Receiver Configuration
The Lemorele R100 Plus system supports connecting multiple receivers to a single transmitter. One R100 Plus transmitter (TX) can be paired with up to four R100 Plus-RX receivers. However, it is important to note that four receivers cannot be connected to a single transmitter simultaneously for active transmission. The system supports a 1-to-1, 1-to-2, 1-to-3, or 1-to-4 configuration, with transmission distance decreasing as more receivers are added:
- 1 TX to 1 RX transmission distance: 200m
- 1 TX to 2 RX transmission distance: 60m
- 1 TX to 3 RX transmission distance: 30m
- 1 TX to 4 RX transmission distance: 20m
To add additional receivers, follow the pairing instructions in Section 3.2 for each new receiver.

Figure 4.1: Multi-receiver setup showing one transmitter (TX) connected to four receivers (RX), with corresponding transmission distances.
5. Maintenance
To ensure the longevity and optimal performance of your Lemorele R100 Plus-RX receiver, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or aerosols.
- Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: If using the battery, avoid fully discharging it frequently. For long-term storage, charge the battery to approximately 50% to preserve its lifespan.
- Ventilation: Ensure the device has adequate ventilation during operation to prevent overheating.
6. Troubleshooting
If you encounter issues with your R100 Plus-RX receiver, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No signal on display | Receiver not powered on; Not paired with TX; Incorrect HDMI input on display; TX not transmitting. | Ensure receiver is powered on. Re-pair receiver with TX (Section 3.2). Select correct HDMI input on your display. Check TX status. |
| Poor video quality / Flickering | Excessive distance; Obstructions; Interference; Low battery on RX or TX. | Reduce distance between TX and RX. Remove obstructions. Minimize other 5G wireless devices. Recharge batteries. |
| Audio but no video | HDMI cable issue; Display compatibility. | Try a different HDMI cable. Ensure your display supports the transmitted resolution (1080P). |
| Receiver not turning on | No power; Faulty power adapter/battery. | Check power connection. Ensure battery is charged or try powering with the adapter directly. |
7. Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Lemorele |
| Model Number | R100 Plus-RX |
| Color | Black |
| Connectivity Technology | HDMI |
| Connections | HDMI 5G |
| Special Features | Battery or 12V adapter powered, HDMI Loopout (on TX), 1 TX to 4 RX max |
| Compatible Devices | Lemorele R100 Plus (Transmitter) |
| Battery Composition | Lithium-ion |
| Battery Capacity | 4400 mAh (included) |
| Rechargeable Battery | Yes |
| Video Encoding | H.264, H.265/HEVC, MPEG-4, etc. |
| Surround Sound Channel Config. | 4.0 |
| Audio Output Mode | Stereo, Surround |
| Total HDMI Ports | 1 (Output) |
| Connector Type | USB and HDMI |
| Transmission Distance (1 TX to 1 RX) | Up to 200m (open field) |
| Transmission Frequency | 5.8 GHz |
8. Warranty and Support
For warranty information and technical support, please refer to the warranty card included in your product packaging or visit the official Lemorele website. Keep your purchase receipt as proof of purchase for any warranty claims.
If you require further assistance or have questions not covered in this manual, please contact Lemorele customer support through the contact information provided on their official website or the product packaging.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.