1. Introduction
Thank you for choosing the Lifelong 700W Nutri Blender. This appliance is designed for efficient blending of fruits, vegetables, and other ingredients to create smoothies, juices, dips, and grind dry items. Please read this manual carefully before operating the appliance to ensure safe and optimal performance. Keep this manual for future reference.
2. Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
- Read all instructions before using the appliance.
- Do not immerse the motor base in water or other liquids. Clean with a damp cloth only.
- Always unplug the appliance from the power outlet when not in use, before assembling or disassembling parts, and before cleaning.
- Avoid contact with moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact customer service for examination, repair, or adjustment.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always operate the blender with the lid in place.
- Do not blend hot liquids, as this may cause pressure buildup and result in injury.
- Ensure the jar is securely locked onto the motor base before operating.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not operate the blender empty.
- Do not overload the blender. Refer to the operating instructions for maximum fill levels.
3. Product Components
The Lifelong 700W Nutri Blender comes with the following components:
- 1 N Nutri Blender Motor Base (700W)
- 2 N Tall Jars (750ml capacity)
- 2 N Small Jars (500ml capacity)
- 2 N Sipper Lids
- 1 N Flat Blade (for grinding dry ingredients)
- 1 N Blending Blade (for smoothies and juices)
- 1 N User Manual cum Warranty Card
Figure 1: Included Components Overview
4. Setup and Assembly
Before first use, wash all jars and blades with warm, soapy water. Rinse thoroughly and dry. The motor base should be wiped clean with a damp cloth.
4.1 Assembling the Blender
- Place the motor base on a clean, dry, and stable surface. Ensure the power cord is unplugged.
- Fill your chosen jar (750ml or 500ml) with ingredients. Do not exceed the MAX fill line.
- Select the appropriate blade assembly (Blending Blade for liquids/soft ingredients, Flat Blade for dry grinding). Screw the blade assembly onto the open end of the jar until it is tightly sealed.
- Invert the jar and place it onto the motor base. Align the tabs on the jar with the slots on the motor base.
- Turn the jar clockwise to lock it into place. The blender will not operate unless the jar is correctly locked.
Figure 2: Locking the Jar onto the Motor Base
5. Operating Instructions
5.1 Blending Smoothies and Juices
- Ensure the blender is assembled as described in Section 4.1, using the Blending Blade.
- Plug the power cord into a suitable electrical outlet (220V).
- Press down on the jar to start blending. The blender operates with a single speed.
- Blend for short intervals (e.g., 30-60 seconds) to achieve desired consistency. For best results, use the pulse method by pressing and releasing the jar.
- Do not operate continuously for more than 1 minute to prevent overheating. Allow the motor to rest for at least 2 minutes between cycles.
- Once blending is complete, release pressure on the jar and unplug the appliance.
- Carefully remove the jar by turning it counter-clockwise. Unscrew the blade assembly and attach a sipper lid if desired.
Figure 3: Blending with the Blending Blade
5.2 Grinding Dry Ingredients
- Ensure the blender is assembled as described in Section 4.1, using the Flat Blade.
- Plug the power cord into a suitable electrical outlet (220V).
- Press down on the jar to start grinding.
- Grind for short bursts (e.g., 10-20 seconds) until desired consistency is reached.
- Do not operate continuously for more than 30 seconds. Allow the motor to rest for at least 2 minutes between cycles.
- Once grinding is complete, release pressure on the jar and unplug the appliance.
- Carefully remove the jar by turning it counter-clockwise. Unscrew the blade assembly.
Figure 4: Grinding with the Flat Blade
6. Cleaning and Maintenance
Regular cleaning ensures the longevity and hygiene of your Nutri Blender.
6.1 Self-Cleaning Function
- After use, fill the jar with warm water and a drop of dish soap.
- Attach the blending blade assembly and secure the jar onto the motor base.
- Press down on the jar for a few seconds to activate the self-cleaning cycle.
- Rinse the jar and blade assembly thoroughly under running water.
Figure 5: Self-Cleaning Process
6.2 General Cleaning
- Motor Base: Wipe the motor base with a damp cloth. Do not immerse it in water or any other liquid.
- Jars and Lids: Wash jars and lids with warm, soapy water. They are also top-rack dishwasher safe.
- Blade Assemblies: Carefully wash blade assemblies with warm, soapy water. Use a brush to clean around the blades. Handle blades with extreme caution as they are sharp.
- Ensure all parts are completely dry before storing or reassembling.
7. Troubleshooting
If you encounter any issues with your Lifelong Nutri Blender, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on. | Not plugged in; Jar not locked correctly; Overload protection activated. | Ensure the power cord is securely plugged in. Lock the jar onto the motor base by turning it clockwise until it clicks. Unplug, wait 15 minutes for the motor to cool, then try again. Reduce ingredients if overloaded. |
| Ingredients are not blending smoothly. | Too little liquid; Jar is overfilled; Ingredients are too large. | Add more liquid. Do not exceed the MAX fill line. Cut ingredients into smaller pieces. Use the pulse function for better control. |
| Burning smell from motor. | Overheating due to prolonged use or overload. | Immediately unplug the blender. Allow the motor to cool down for at least 30 minutes. Reduce the load and blend in shorter intervals. If the smell persists, contact customer support. |
| Leakage from the jar. | Blade assembly not tightened properly; Seal ring is damaged or missing. | Ensure the blade assembly is screwed tightly onto the jar. Check if the seal ring is correctly placed and not damaged. Replace if necessary. |
| Excessive noise or vibration. | Unstable surface; Jar not seated correctly; Damaged blade. | Place the blender on a stable, flat surface. Ensure the jar is locked securely. Inspect blades for damage; if damaged, discontinue use and contact support. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | LLNBB006 |
| Brand | Lifelong |
| Wattage | 700 Watts |
| Voltage | 220V |
| Number of Speeds | 1 |
| Jar Capacity | 2 x 750ml, 2 x 500ml |
| Material | Plastic, Stainless Steel |
| Blade Material | Stainless Steel |
| Product Dimensions (D x W x H) | 38D x 23W x 16H Centimeters |
| Item Weight | 2100 Grams |
| Special Features | Anti-Skid, Lightweight, Overload Protection, Safety Lock |
| Country of Origin | India |
9. Warranty and Customer Support
9.1 Warranty Information
The Lifelong 700W Nutri Blender (Model LLNBB006) comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accident, alteration, neglect, unauthorized repair, or commercial use.
Please retain your purchase receipt as proof of purchase for warranty claims.
9.2 Customer Support
For any product-related queries, technical assistance, or warranty claims, please contact Lifelong Customer Support:
- Phone: +91 9711558877
- Email: customercare@lifelongonline.com
- Manufacturer Address: 5th Floor, Unit No. 508, DLF South Court, Saket District Center, Saket New Delhi, India - 110017
