Afloia Kilo
Afloia Kilo White Air Purifier
Model: Kilo
1. Introduction
Thank you for choosing the Afloia Kilo White Air Purifier. This manual provides important information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
2. Important Safety Information
To reduce the risk of fire, electric shock, or injury, please observe the following safety precautions:
- Always unplug the air purifier before moving, cleaning, or performing any maintenance.
- Do not operate the unit with a damaged cord or plug. Contact customer support for assistance.
- Keep the power cord away from heated surfaces.
- Do not use the air purifier in wet or damp environments, such as bathrooms.
- Do not insert fingers or foreign objects into the air inlets or outlets.
- Ensure the unit is placed on a stable, level surface to prevent tipping.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not attempt to repair or modify the unit yourself. All repairs should be performed by qualified personnel.
3. Package Contents
Please check the package for the following items:
- Afloia Kilo Air Purifier (1)
- 3-in-1 Filtration System (1, may be pre-installed)
- User Manual (1)
4. Product Overview
Familiarize yourself with the components and features of your Afloia Kilo Air Purifier.

This image displays the Afloia Kilo White Air Purifier in a home environment, highlighting its key features: maximum coverage of 1076 sq ft, a 3-stage filtration system, 2/4/8 hour timer settings, and a 7-color night light function.
Main Components:
- Air Inlet: Where ambient air enters the purifier.
- Air Outlet: Where purified air is released.
- Control Panel: Buttons for operating the unit.
- Filter Compartment: Houses the 3-in-1 filtration system.
5. Setup
5.1 Unpacking
- Remove the air purifier and all packaging materials from the box.
- Ensure all components listed in Section 3 are present and undamaged.
5.2 Filter Installation
The 3-in-1 filter is crucial for the purifier's performance. It may come pre-installed, but the plastic packaging must be removed before first use.
- Unplug the air purifier from the power outlet.
- Locate and open the filter compartment cover (usually at the bottom or back of the unit).
- Remove the 3-in-1 filter from the unit.
- Carefully remove all plastic packaging from the filter.
- Insert the filter back into the unit, ensuring it is correctly seated and oriented.
- Close the filter compartment cover securely.
5.3 Placement
- Place the air purifier on a firm, level, and stable surface.
- Ensure there is at least 15 cm (6 inches) of clear space around all sides of the unit for optimal air intake and circulation.
- Avoid placing the unit near heat sources, in direct sunlight, or in areas with high humidity.
- Keep the unit away from curtains or other objects that could block the air inlets or outlets.
6. Operating Instructions
6.1 Control Panel
The control panel is located on the top of the unit and features touch-sensitive buttons for various functions.
6.2 Power On/Off
Plug the power cord into a suitable electrical outlet.
- Press the Power Button once to turn the air purifier ON.
- Press the Power Button again to turn the air purifier OFF.
6.3 Fan Speed Adjustment
The air purifier offers multiple fan speeds to suit your needs.
- Press the Fan Speed Button repeatedly to cycle through different fan speeds: Low, Medium, High, and Sleep mode.
- In Sleep Mode, the fan operates at its lowest setting (22 dB) for quiet operation, ideal for bedrooms.
6.4 Timer Function
Set the air purifier to operate for a specific duration.
- Press the Timer Button repeatedly to select a desired operating time: 2 hours, 4 hours, or 8 hours.
- The unit will automatically shut off once the selected time has elapsed.
6.5 Night Light
The air purifier includes an ambient night light feature.
- Press the Night Light Button to activate the night light.
- Press the button again to cycle through 7 different color options or to turn the night light off.
7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your air purifier.
7.1 Filter Replacement
The filter replacement indicator light will illuminate when it is time to replace the 3-in-1 filter. The filter typically needs to be replaced every 6-8 months, depending on usage and air quality.
- Unplug the air purifier from the power outlet.
- Open the filter compartment cover.
- Remove the old 3-in-1 filter and dispose of it properly.
- Remove all plastic packaging from the new filter.
- Insert the new filter into the unit, ensuring correct orientation.
- Close the filter compartment cover securely.
- Plug the air purifier back into the power outlet.
- To reset the filter indicator, press and hold the Power Button for approximately 5 seconds until the blinking red light disappears.
7.2 Cleaning the Pet Filter Layer
The first layer of the 3-in-1 filter, designed for pet hair, can be vacuumed to extend its service life. This should be done periodically as needed.
- Ensure the unit is unplugged before attempting to clean the filter.
- Carefully remove the filter from the unit.
- Use a soft brush attachment on a vacuum cleaner to gently remove accumulated pet hair and large particles from the outermost layer of the filter.
- Do not wash the filter with water or any liquids.
- Reinsert the cleaned filter and close the compartment cover.
7.3 Exterior Cleaning
- Unplug the air purifier before cleaning.
- Wipe the exterior surfaces of the unit with a soft, dry cloth.
- Do not use abrasive cleaners, waxes, or solvents, as these may damage the finish.
- Do not immerse the unit in water or any other liquid.
8. Troubleshooting
Refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | Not plugged in; Power outlet malfunction; Power button not pressed. | Ensure the power cord is securely plugged into a working outlet. Press the Power button. |
| Weak airflow or unusual noise | Filter clogged; Air inlets/outlets blocked; Filter plastic not removed. | Check and remove any obstructions. Ensure filter plastic packaging is removed. Clean or replace the filter. |
| Filter indicator light remains on after filter replacement | Filter reset procedure not performed correctly. | Perform the filter reset procedure: press and hold the Power button for 5 seconds until the light disappears. |
| Night light not working | Night Light button not pressed. | Press the Night Light button to activate or cycle through colors. |
9. Specifications
| Model | Kilo |
| Coverage Area | Up to 1076 sq ft (purifies 269 sq ft 4 times per hour) |
| Noise Level | 22 dB (Sleep Mode) |
| Filtration System | 3-in-1 (Pre-filter, H13 True HEPA, Activated Carbon, Pet Allergy Filter) |
| Control Method | Button Control (Touch Panel) |
| Timer Settings | 2, 4, 8 hours |
| Night Light | 7 Colors |
| Color | White |

This diagram illustrates the air circulation efficiency of the Afloia Kilo Air Purifier, showing it can achieve 2 air changes per hour in a 538 sq ft room and 4 air changes per hour in a 269 sq ft room, demonstrating its faster air circulation capability.
10. Warranty and Support
For warranty information or technical support, please refer to the contact details provided on the Afloia official website or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







