Quality Heating QH-RW Series Infrared Panel - User Manual

1. Important Safety Instructions

Please read all instructions carefully before using this infrared panel. Failure to follow these instructions may result in electric shock, fire, or personal injury.

• Ensure the power supply voltage matches the rating label on the panel.
• Do not operate the panel with a damaged cord or plug. If the cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• Do not use the panel in bathrooms, laundry areas, or similar indoor locations where it may come into contact with water.
• Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the panel.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the panel.
• Unplug the panel when not in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

2. Product Overview

The Quality Heating QH-RW Series Infrared Panel is an efficient electric heating solution designed for indoor use. It provides comfortable radiant heat, offering an energy-efficient alternative to traditional heating systems. This round panel features a sleek design suitable for various room types.

Figure 2.1: Front view of the Quality Heating QH-RW Series round infrared panel. This image shows the smooth, white circular surface of the panel, with the power cord visible at the bottom.

Figure 2.2: Side profile view of the Quality Heating QH-RW Series round infrared panel. This image highlights the slim design and the thickness of the panel from an angled perspective.

Figure 2.3: Rear view of the Quality Heating QH-RW Series infrared panel. This image displays the back of the panel, including the two horizontal mounting brackets and the attached power cable with its plug.

3. Installation and Mounting

This infrared panel is designed for wall or ceiling mounting. Ensure the mounting surface is suitable to support the weight of the panel and that there is adequate clearance from combustible materials.

3.1 Mounting Steps:

1. Choose Location: Select a suitable location on a wall or ceiling, ensuring it is away from direct water sources and has sufficient clearance from other objects.
2. Mark Drilling Points: Using the provided mounting template (if applicable) or by measuring the distance between the mounting holes on the back of the panel, mark the drilling points on your chosen surface.
3. Drill Holes: Drill holes at the marked points. Use an appropriate drill bit for your wall or ceiling material.
4. Insert Wall Plugs: Insert the appropriate wall plugs (e.g., rawl plugs) into the drilled holes.
5. Attach Brackets: Secure the mounting brackets to the wall/ceiling using screws, ensuring they are firmly fixed.
6. Mount Panel: Carefully lift the infrared panel and align the slots on the back of the panel with the attached mounting brackets. Slide the panel onto the brackets until it is securely seated.
7. Connect Power: Once securely mounted, plug the power cord into a grounded electrical outlet.

Figure 3.1: Detailed rear view of the Quality Heating QH-RW Series infrared panel. This image provides a closer look at the two metal mounting rails on the back of the panel, which are used to secure it to a wall or ceiling. The power cable is also visible.

4. Operation

Operating the Quality Heating QH-RW Series Infrared Panel is straightforward. This model is designed for simple plug-and-play functionality.

4.1 Basic Operation:

1. Power Connection: Ensure the panel is securely mounted and the power cord is plugged into a suitable, grounded electrical outlet.
2. Activation: The panel will begin to heat up once connected to power. There are no external controls on this specific model; it operates when plugged in.
3. Temperature Control (Optional): For temperature regulation, an external thermostat (not included) can be used. Connect the panel to a compatible thermostat according to the thermostat's instructions.
4. Deactivation: To turn off the panel, simply unplug it from the electrical outlet.

5. Maintenance

The Quality Heating QH-RW Series Infrared Panel requires minimal maintenance to ensure optimal performance and longevity.

5.1 Cleaning and Care:

• Before Cleaning: Always unplug the panel from the power outlet and allow it to cool completely before cleaning.
• Surface Cleaning: Wipe the surface of the panel with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Dust Removal: Use a soft brush or vacuum cleaner with a brush attachment to remove dust from the surface and edges.
• No Water Immersion: Never immerse the panel in water or spray water directly onto it.
• Storage: If storing the panel for an extended period, ensure it is clean and dry, and store it in a cool, dry place.

6. Troubleshooting

If you encounter issues with your infrared panel, refer to the following troubleshooting guide:

7. Specifications

Key technical specifications for the Quality Heating QH-RW Series Infrared Panel:

8. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact Quality Heating directly. Keep your proof of purchase for any warranty claims.

For further assistance or technical inquiries, please visit the official Quality Heating website or contact their customer service department.