Introduction
This manual provides essential information for the proper identification and use of your Yale Lock PT1167 Replacement Key. This key is designed to replace lost or damaged keys for Yale locks within the PT0184-PT1183 series, provided the correct lock code is known.
Key Identification and Setup
To ensure you have the correct replacement key, it is crucial to identify the specific lock code for your Yale lock. The PT1167 key is custom-cut based on this code.
Identifying Your Lock Code:
- Original Key: The lock code is typically stamped directly onto your original Yale key.
- Lock Face: If your original key is lost, the lock code may be stamped on the face of the lock cylinder itself. Carefully inspect the lock for any engraved or printed codes.
- Online Resources: For Yale GCODE or other codes, refer to online resources or contact Yale Lock support for assistance in retrieving your lock code.
Once the correct lock code is determined, the PT1167 key is cut on a Y6 key blank to match your specific lock.
Figure 1: Example of a Yale Replacement Key (PT0184 shown). The PT1167 key will have a similar appearance, cut to your specific lock code.
Operating Instructions
Using your Yale Lock PT1167 Replacement Key is straightforward:
- Insert Key: Gently insert the key into the lock cylinder's keyway until it is fully seated. Do not force the key.
- Turn Key: Rotate the key clockwise or counter-clockwise, depending on the lock mechanism, to engage or disengage the lock.
- Remove Key: Once the lock is operated, return the key to its original vertical position and gently pull it out.
Maintenance
Proper care will extend the life of your replacement key and ensure reliable operation:
- Keep Clean: Periodically wipe the key with a soft, dry cloth to remove dirt or debris. Avoid using abrasive cleaners.
- Avoid Damage: Do not bend, twist, or use the key for purposes other than operating the lock. Store it in a safe place where it won't be damaged.
- Lubrication: If the lock mechanism feels stiff, apply a small amount of graphite lubricant specifically designed for locks into the keyway, not directly onto the key.
Troubleshooting
If you encounter issues with your replacement key, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Key does not insert fully. | Incorrect key code; debris in lock; bent key. | Verify lock code; clean lock keyway; inspect key for damage. |
| Key inserts but does not turn. | Incorrect key code; lock mechanism jammed; key worn. | Confirm lock code; try lubricating lock; if key is worn, a new replacement may be needed. |
| Key is difficult to remove. | Lock mechanism issue; key slightly bent. | Ensure key is in vertical position before removing; check key for slight bends. |
If problems persist, it may indicate an issue with the lock itself or that an incorrect key code was used for the replacement. Contact a professional locksmith or the key supplier for further assistance.
Specifications
| Attribute | Detail |
|---|---|
| Brand | EasyKeys |
| Manufacturer | Yale Lock |
| Model Series | PT0184-PT1183 (including PT1167) |
| Key Blank Type | Y6 |
| Item Weight | 0.247 ounces (7 Grams) |
| ASIN | B0D12V278S |
| Date First Available | April 3, 2024 |
Warranty and Support
For any questions regarding your Yale Lock PT1167 Replacement Key, or for assistance with identifying your lock code, please contact EasyKeys customer support. While specific warranty details are not provided here, EasyKeys aims to ensure customer satisfaction with their custom-cut keys.
You can visit the EasyKeys Store on Amazon for more information or to contact their support team.