Introduction
Welcome to the Baybee Bronco Electric Ride-On Jeep user manual. This document provides essential information for the safe assembly, operation, and maintenance of your new ride-on toy. Please read all instructions carefully before use to ensure a safe and enjoyable experience for your child.
Safety Information
WARNING: No Warranty is explicitly stated for this product. Please retain proof of purchase for any potential claims.
- Adult supervision is required at all times.
- Ensure all parts are correctly assembled and secured before use.
- Do not operate near stairs, hills, roads, or swimming pools.
- Always use in a safe, open area.
- The maximum weight capacity is 30 kg.
- Recommended age: 24 months - 8 years.
- Always ensure the child is wearing appropriate safety gear, such as a helmet.
- Keep hands and feet away from moving parts.
Parts Included in Package
Before beginning assembly, please verify that all components are present:
- One Battery Operated Jeep (Main Body)
- Assembly Manual
- Windshield
- Seat Set
- Wheels (4x)
- Top Light Set
- Steering Wheel
- Wheel Caps (4x)
- Side Mirrors (2x)
- Screw Set (various screws, washers, bolts)
- Remote Control
- Charger (12V 1000MA)
Image: The complete Baybee Bronco Electric Ride-On Jeep in black, showcasing its design and features.
Assembly Instructions
Follow these steps carefully to assemble your Baybee Bronco Electric Ride-On Jeep. Refer to the assembly video for visual guidance.
Video: Assembly guide for the Baybee Bronco Electric Ride-On Jeep. This video demonstrates the step-by-step process of putting together the vehicle, including attaching wheels, connecting wiring, and securing components.
- Unboxing and Part Identification: Carefully open the package and identify all included parts as listed above.
Image: The Baybee Bronco Electric Jeep components laid out after unboxing, ready for assembly.
- Attach the Wheels:
- Place the main body of the jeep on a stable surface.
- For each wheel, ensure the assembly order of hardware is as follows: wheel, washer, and finally bolt.
- Tighten the bolt securely.
- Fix the wheel cover by simple pressure.
- Repeat this process for all four wheels.
Image: Close-up of the large, durable wheels of the Baybee Bronco Jeep, designed for various terrains.
- Connect Steering Wheel Wiring:
- Connect the steering wheel wire to the multi-plug protruding from the steering console.
- Ensure the wire is threaded back through the console once connected to prevent damage.
- Attach Front Windshield:
- Connect the front windshield light wire.
- Attach the front windshield to the relative gaps on the bonnet, ensuring it clicks into place securely.
Image: The RGB windshield light feature of the Baybee Bronco Jeep, displaying colorful patterns.
- Install Side Mirrors: Connect the reflectors (side mirrors) on both sides of the jeep.
- Assemble and Attach Top Light Bar:
- Thread the wire attached to the light bar through the designated holes.
- Secure the light bar components together.
- Thread the wire attached to the light bar through the hole above the rear wheel.
- Connect the light wire to the corresponding plug inside the jeep's body.
Image: Close-up of the top-mounted LED lights on the Baybee Bronco Jeep, providing additional illumination.
- Connect Battery Terminal: Connect the battery terminal to the multi-plug inside the jeep's body.
- Install Seat: Slide the seat onto the brackets and secure it with screws on both sides.
Operating Instructions
Your Baybee Bronco Electric Ride-On Jeep offers various features for an engaging play experience.
- Dual Control Modes:
- Parental Remote Control: Use the 2.4G wireless remote to control the jeep's movement, steering, and speed. This is ideal for younger children or for parental supervision.
- Child Manual Operation: Older children can operate the jeep using the steering wheel and foot accelerator.
Image: A child driving the Baybee Bronco Jeep while a parent uses the remote control, demonstrating the dual control feature.
- Starting the Jeep: Press the red "ON/OFF" button on the dashboard to start the engine sound and power on the vehicle.
- Foot Accelerator: Press the foot accelerator pedal to move the jeep forward. Release to brake.
- Steering: Use the steering wheel for directional control.
- Multimedia Features: The dashboard includes controls for music, USB, and Aux connectivity.
Image: Close-up of the Baybee Bronco Jeep's dashboard, showing the multimedia controls including USB and Aux ports.
- Lights: The jeep features RGB windshield lights and bright LED headlights. These lights function with music.
- Swing Mode: Activate the swing mode for a gentle back-and-forth motion, providing additional entertainment.
Charging Instructions
To ensure optimal battery life and performance, follow these charging guidelines:
- Locate the charging port on the jeep.
- Plug the charger into the charging port.
- Plug the charger into a standard wall outlet.
- The indicator light on the charger will show the charging status (e.g., red for charging, green for fully charged).
- A full charge typically provides up to 40 minutes of continuous playtime.
- Do not overcharge the battery. Disconnect the charger once the battery is fully charged.
Image: Close-up of the charging port on the Baybee Bronco Electric Jeep, indicating where to connect the charger.
Maintenance
Regular maintenance helps prolong the life and performance of your ride-on jeep.
- Cleaning: Wipe the jeep with a soft, damp cloth. Do not use abrasive cleaners or solvents. Avoid spraying water directly onto electrical components.
- Storage: Store the jeep in a dry, cool place away from direct sunlight and moisture. If storing for extended periods, ensure the battery is fully charged and recharge it every 30 days to prevent damage.
- Battery Care: Always use the provided charger. Do not attempt to modify the electrical system.
- Inspection: Periodically check all screws, bolts, and connections to ensure they are tight and secure. Inspect wheels for wear and tear.
Troubleshooting
If you encounter any issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Jeep does not move. | Battery is low or disconnected. | Charge the battery. Check battery connections. |
| Jeep moves slowly. | Low battery, overloaded, or operating on an incline. | Recharge battery. Reduce load. Operate on flat surfaces. |
| Lights or music not working. | Loose wiring connection. | Check all wiring connections, especially for the windshield and top lights. |
| Remote control not working. | Remote batteries low or not paired. | Replace remote batteries. Refer to remote pairing instructions (if applicable, not detailed in source). |
| One wheel not turning. | Loose wheel bolt or motor issue. | Check wheel bolt tightness. If issue persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | BMJ117P |
| Brand | BAYBEE |
| Battery | 12V 4.5AH*1 (included) |
| Motor | 12V (2 X 45W) |
| Charger | 12V 1000MA (included) |
| Maximum Load | 30 kg |
| Applicable Age | 3-8 Years (Manufacturer recommended: 24 months - 8 years) |
| Max Car Speed | 3-4 KM/H |
| Material Type | Plastic |
| Product Dimensions (LxWxH) | 110 x 68 x 70 cm |
| Item Weight | 20 kg |
| Country of Origin | India |
Image: Visual representation of the Baybee Bronco Electric Jeep's key dimensions and specifications.
Warranty and Support
Warranty Information: The product information states "No Warranty". Please retain your proof of purchase for any potential inquiries or support needs.
For further assistance or technical support, please contact the manufacturer or seller.
- Manufacturer: BAYBEE
- Packer: Galaxy Incorporation, Contact No: 89390 28239, 75204 44000
