Introduction
Thank you for choosing the PELONIS Oscillating Tower Fan and Heater Combo. This versatile 2-in-1 appliance is designed to provide optimal comfort throughout the year, offering both powerful cooling and efficient heating. Its compact design, intuitive controls, and advanced safety features make it an ideal solution for various indoor spaces. Please read this manual thoroughly before operation to ensure safe and effective use of your new appliance.
Important Safety Instructions
READ AND SAVE THESE INSTRUCTIONS
CAUTION:
- Read all instructions before using this heater.
- Always unplug the heater when not in use or before cleaning.
- The front grill does heat when in use. To avoid burns do not directly touch hot surfaces.
- Keep electrical cords, furnishings, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- This heater is not intended for use by persons with reduced physical, sensory or mental abilities, or lack of experience and knowledge unless they are under supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Ensure the heater is placed on a stable, level surface to avoid tipping.
- Do not operate any fan with a damaged cord or plug.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- Do not use outdoors.
Package Contents
Upon unpacking, please ensure all items listed below are present and in good condition. The packaging is designed to protect the unit during transit, so please inspect for any damage before discarding.
- PELONIS 2-in-1 Fan and Heater Unit
- Remote Control (requires 2 AAA alkaline batteries, sold separately)
- User Manual
Image: The PELONIS Tower Fan and Heater Combo unit, showcasing its sleek design and the included remote control. Blue and orange air streams illustrate its dual functionality.
Setup
The PELONIS Tower Fan and Heater Combo requires no tools for assembly, allowing for quick and easy setup.
- Carefully remove the unit and all packaging materials from the box.
- Place the unit on a firm, level surface. Ensure it is at least 3 feet (0.9 meters) away from any walls, furniture, or combustible materials.
- Insert 2 AAA alkaline batteries into the remote control (ensure correct polarity).
- Plug the power cord into a standard 100V AC electrical outlet.
Image: A visual representation of the PELONIS Tower Fan and Heater's elegant and compact design, highlighting its dimensions (38 inches tall, 10.3 inches deep, 8.4 inches wide).
Operating Instructions
The PELONIS Tower Fan and Heater Combo offers intuitive controls for year-round comfort.
Controls
Use the LED touch panel display on top and a physical slide lever for mode selection.
Image: Close-up view of the PELONIS Tower Fan and Heater's controls, showing the physical slide switch for fan/heater mode and the LED touch panel display with various function buttons.
Mode Selection (Fan/Heater)
Use the physical slide lever located on the front of the unit to switch between Fan mode and Heater mode.
- Fan Mode: Offers 3 cooling fan speeds (Low, Medium, High) for versatile air circulation.
- Heater Mode: Provides 2 heating speeds (Low, High) for effective warmth.
Image: A visual demonstrating the "Cool and Warm in One Switch" feature, showing the physical lever to select between fan (cooling) and heater (heating) modes.
Temperature and Speed Adjustment
Once a mode is selected via the physical switch, use the LED touch panel or remote control to adjust settings:
- Power Button: Press to turn the unit ON or OFF.
- Speed/Temperature Buttons (+/-): Adjust fan speed in Fan mode or desired temperature in Heater mode. The digital thermostat allows temperature adjustment from 41°F to 95°F (5°C to 35°C).
- ECO Mode: In Heater mode, activate ECO mode to maintain room temperature while optimizing energy consumption.
Oscillation
The unit features a 60-degree oscillation function to distribute air evenly across a wider area.
- Oscillation Button: Press the oscillation button on the control panel or remote to activate/deactivate the oscillating movement.
Image: Illustrates the wide reach of warmth from the PELONIS Tower Fan and Heater, showing a 70-degree oscillation angle for broader coverage.
12-Hour Timer
Set a timer for automatic shut-off:
- Timer Button: Press the timer button on the control panel or remote to set the desired operating duration, up to 12 hours. Each press typically increases the timer by one hour.
Maintenance
Regular cleaning helps maintain the performance and longevity of your PELONIS Tower Fan and Heater Combo.
- Always unplug the unit from the power outlet before cleaning.
- Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals, as they may damage the finish.
- Air Intake/Output Grills: Use a vacuum cleaner with a brush attachment to gently remove dust and debris from the air intake and output grills. Ensure these areas are free from obstructions for optimal airflow.
- Storage: If storing the unit for an extended period, clean it thoroughly, then place it back in its original packaging or a protective cover. Store in a cool, dry place.
- Do NOT immerse the unit in water or allow water to drip into the interior.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power to the unit; Tip-over switch activated; Overheat protection activated. | Ensure the power cord is securely plugged into a working outlet. Check the household fuse/circuit breaker. Ensure the unit is on a stable, flat surface. If tipped, stand upright and wait a few minutes before restarting. Unplug the unit, let it cool down for 30 minutes, then plug it back in. |
| Weak airflow or heating. | Air intake/output grills are blocked; Incorrect mode/speed setting. | Clean the air intake and output grills to remove dust or obstructions. Ensure the unit is set to the desired fan speed or heating level. Consider room size and insulation for heating effectiveness. |
| Unit makes unusual noise. | Dust or debris inside the unit; Internal component issue. | Unplug the unit and gently clean the grills. If the noise persists, discontinue use and contact customer support. |
Specifications
- Brand: PELONIS
- Model Number: FZ15RDBPW
- Special Feature: 2 in 1 heater and tower fan, Remote Control
- Color: White
- Form Factor: Tower
- Indoor/Outdoor Usage: Indoor
- Product Dimensions: 8.38"D x 10.31"W x 37.9"H
- Recommended Uses For Product: Cooling, Heating
- Mounting Type: Floor Mount
- Room Type: Bathroom, Bedroom, Dining Room
- Burner Type: Radiant
- Fuel Type: Electric
- Number of Speeds: 5 (3 fan speeds, 2 heater speeds)
- Voltage: 100V
- UPC: 840296510117
- Item Weight: 23.6 pounds
- Manufacturer: PELONIS
- Assembly Required: No
- Batteries Required: No (for unit), Yes (for remote - 2 AAA, not included)
- Included Components: 2 in 1 fan and heater, Remote
Warranty and Customer Support
For warranty information, technical support, or any questions regarding your PELONIS Oscillating Tower Fan and Heater Combo, please refer to the contact information provided on the product packaging or visit the official PELONIS website. Keep your purchase receipt for warranty claims.
Optional protection plans may be available for extended coverage. Please check with your retailer for details.
