1. Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your PETLIBRO Stainless Steel Cat Water Fountain, Model PLWF006. This automatic water dispenser is designed to provide fresh, filtered water for your pets, promoting hydration and overall health.
The fountain features a durable 304 stainless steel construction, a 3-liter capacity, and a quiet pump operation. Regular maintenance, as outlined in this guide, will ensure optimal performance and longevity of the product.
Image 1.1: The PETLIBRO Stainless Steel Cat Water Fountain with included filters and sponges.
2. Product Components
Carefully unpack the fountain and ensure all components are present and undamaged. The package should contain the following items:
- Stainless Steel Fountain Base
- Stainless Steel Water Tray/Lid
- Water Pump with USB Cable
- 4 Replacement Filters
- 4 Pre-filter Sponges
- Instruction Manual (this document)
Image 2.1: Overview of the PETLIBRO water fountain components, including the base, lid, pump, filters, and sponges.
3. Setup Instructions
- Clean Components: Before first use, wash all stainless steel parts (fountain base and lid) thoroughly with soap and water. Rinse well. The stainless steel parts are dishwasher safe.
- Prepare Filter: Soak a new filter in clean water for approximately 5 minutes. This helps remove any loose carbon dust and ensures proper filtration from the start.
- Assemble Pump: Insert a pre-filter sponge onto the water pump intake. Place the pump into the designated area at the bottom of the fountain base. Ensure the USB cable is routed through the cable channel.
- Install Filter: Place the prepared filter into the filter tray, ensuring it sits securely.
- Fill with Water: Fill the stainless steel base with clean water up to the maximum fill line. The fountain has a 3-liter (101oz) capacity.
- Place Lid: Carefully place the stainless steel lid onto the fountain base, ensuring it is properly aligned and seated.
- Connect Power: Connect the USB cable to a compatible USB power adapter (not included) and plug it into a power outlet. The fountain will begin operating.
Image 3.1: The PETLIBRO water fountain fully assembled and operating, showing the continuous water flow.
4. Operating Instructions
The PETLIBRO water fountain is designed for continuous operation, providing fresh water for your pets throughout the day and night.
- Water Flow Adjustment: The water flow rate can be adjusted on the pump to suit your pet's preference. Refer to the pump's markings for flow control.
- Quiet Operation: The fountain operates below 30dB, ensuring a quiet environment for your home and pets.
- Water Level Monitoring: Regularly check the water level in the fountain. Refill as needed to ensure the pump remains submerged and to prevent it from running dry.
Image 4.1: The PETLIBRO water fountain operating with minimal noise, indicated by a sound level below 30dB.
Image 4.2: A cat drinking from the PETLIBRO water fountain, demonstrating its use.
5. Maintenance and Cleaning
Regular cleaning and filter replacement are crucial for maintaining water quality and the fountain's performance.
- Weekly Cleaning: Disassemble the fountain and wash all stainless steel parts with soap and water. The stainless steel components are dishwasher safe (below 80°C/175°F).
- Pump Cleaning: Clean the pump regularly, at least once a month. Disassemble the pump by removing the cover and impeller. Use a small brush to clean any hair or debris from the impeller and its housing. Reassemble the pump carefully.
- Filter Replacement: Replace the filter and pre-filter sponge every 2 to 4 weeks, or more frequently if you have multiple pets or notice significant debris. Search for "B08ZCTGNGD" for replacement filters.
Image 5.1: Illustration of the dishwasher-safe components of the fountain. Note that the pump, filter, and water flow controller are not dishwasher safe.
Image 5.2: The 3-layer filtration system, consisting of a pre-filter sponge, activated carbon, and ion-exchange resin, designed to remove odors, hair, and impurities.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain not dispensing water | Low water level; Pump clogged with hair/debris; Power disconnected. | Refill water to appropriate level; Clean the pump impeller and housing; Check power connection. |
| Excessive noise from pump | Low water level; Pump needs cleaning; Impeller not seated correctly. | Add water; Clean the pump thoroughly; Ensure impeller is correctly installed. |
| Water tastes or smells unusual | Filter needs replacement; Fountain needs cleaning. | Replace filter and pre-filter sponge; Perform a thorough cleaning of all fountain components. |
| Water splashing | Water flow too high; Obstruction at water outlet. | Adjust water flow on the pump to a lower setting; Clear any obstructions from the water outlet. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | PLWF006 |
| Material | 304 Stainless Steel |
| Capacity | 3 Liters (101 oz) |
| Dimensions (LxWxH) | 8.46 x 5.12 x 11.1 inches |
| Item Weight | 1.01 Kilograms (2.23 pounds) |
| Noise Level | Below 30dB |
| Care Instructions | Dishwasher Safe (stainless steel parts only) |
| Included Components | Fountain, Pump, 4 Filters, 4 Sponges |
8. Warranty and Support
The PETLIBRO Stainless Steel Cat Water Fountain (Model PLWF006) comes with a 2-year warranty. For any product inquiries, technical support, or warranty claims, please refer to the contact information provided with your purchase documentation or visit the official PETLIBRO website.
