Product Overview
The Bitvae Cordless Water Dental Flosser is designed to provide effective and convenient oral hygiene. It features multiple cleaning modes and intensity settings to cater to various dental needs, from gentle cleaning to deep plaque removal. Its portable design, long battery life, and waterproof construction make it suitable for home use and travel.
Safety Information
Please read all safety instructions before using the Bitvae Water Dental Flosser to ensure safe operation and prevent injury or damage.
- Do not submerge the device completely in water for extended periods, despite its IPX7 waterproof rating.
- Keep the device out of reach of children.
- Consult a dental professional before use if you have certain medical conditions or have recently undergone oral surgery.
- Always follow proper charging and battery handling instructions to prevent electrical hazards or battery damage.
- Use only clean water or dentist-recommended mouthwash in the reservoir. Do not use abrasive or corrosive liquids.
Components and What's in the Box
Your Bitvae Water Dental Flosser package includes the following items:
- Bitvae Cordless Water Dental Flosser Unit
- 5 Standard Jet Tips
- 1 Tongue Cleaner Tip
- DC-USB Charging Cable
- User Manual
Setup Instructions
Initial Charging
Before first use, fully charge the device. Connect the DC-USB cable to the charging port on the flosser and plug the USB end into a 5V1A adapter or a compatible USB port (e.g., power bank, laptop). A full charge takes approximately 4 hours and provides up to 40 days of use.
Attaching a Nozzle
Select your desired tip (standard or tongue cleaner). Insert the tip into the hole on the top of the flosser handle until it clicks into place. To remove, press the pop-up knob on the side of the handle and pull the tip out.
Filling the Water Tank
The flosser features a 260ML wide-mouth water tank. To fill, detach the water tank from the main unit by twisting or pulling it down (refer to the diagram below). Fill the tank with lukewarm water. Reattach the tank securely to the main unit.
Operating Instructions
The Bitvae Water Dental Flosser offers 3 modes and 5 intensity settings for a total of 15 cleaning combinations.
Selecting Mode and Intensity
Press the 'Mode' button to cycle through the available modes: Clean, Jet, and Massage. The selected mode will be indicated by an LED light. Use the 'Intensity' button to adjust the water pressure from 1 (gentle) to 5 (powerful), ranging from 16-136 psi.
Using the Flosser
- Fill the water tank and attach a nozzle.
- Select your desired mode and intensity.
- Lean over a sink and place the tip into your mouth, directing it at a 90-degree angle to your gumline.
- Press the 'Power' button to turn on the device. Allow the water to flow from your mouth into the sink.
- Move the tip along your gumline, pausing briefly between teeth. Ensure you clean both the front and back surfaces of your teeth.
- Continue for approximately 60 seconds or until the water tank is empty.
- Press the 'Power' button again to turn off the device.
Maintenance
Cleaning the Water Tank
The wide-mouth design of the 260ML water tank allows for easy and thorough cleaning. After each use, detach the tank and rinse it with clean water. For deeper cleaning, you can use a small brush to remove any residue. Ensure the tank is completely dry before reattaching or storing.
Cleaning the Nozzles
Rinse the tips under running water after each use. For a more thorough cleaning, you can soak them in a solution of 2 parts water to 1 part white vinegar for 5-10 minutes, then rinse thoroughly.
Battery Care
To maintain optimal battery life, avoid completely draining the battery before recharging. If the device will not be used for an extended period, charge it fully before storage and recharge every few months.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on or stops working suddenly. | Low battery; mineral buildup from hard water. | Charge the device fully. If using hard water, try using distilled water. For mineral buildup, add a few drops of vinegar to the water reservoir and run the device briefly, then rinse thoroughly. |
| Weak water pressure. | Low battery; clogged nozzle; incorrect intensity setting. | Recharge the device. Clean the nozzle thoroughly. Increase the intensity setting. |
| Water tank leaks. | Water tank not properly attached. | Ensure the water tank is securely attached and properly sealed to the main unit. |
Specifications
- Model Number: D2
- Dimensions: 6.6 x 9.4 x 22.3 cm
- Weight: 380 g
- Water Tank Capacity: 260 ML (9 oz)
- Pressure Range: 16-136 psi (5 intensities)
- Modes: 3 (Clean, Jet, Massage)
- Battery Life: Up to 40 days (approx. 4 hours charge time)
- Waterproof Rating: IPX7
- Power Source: Battery Powered (1 Lithium Ion battery included)
- Country of Origin: China
Warranty and Support
Bitvae offers a 24-month quality service for this product. For any issues, questions, or support needs, please contact Bitvae customer service through the retailer where you purchased the product or visit the official Bitvae website for contact information.
For more information, you may refer to the official Bitvae brand page: Bitvae Brand Store
Additional Features
IPX7 Waterproof Design
The IPX7 waterproof rating allows for safe use in the shower, providing convenience and flexibility for your oral hygiene routine.
Portable for Travel
Its compact and cordless design makes the Bitvae Water Dental Flosser ideal for travel, ensuring you can maintain your oral hygiene routine anywhere.
Family Sharing Tips
The inclusion of multiple standard tips and a tongue cleaner tip allows for individual use by different family members, promoting shared oral hygiene with distinct tips.
