Fixwal 63.3 Inch TV Stand with 16 Drawers

Introduction

Thank you for purchasing the Fixwal 63.3 Inch TV Stand with 16 Drawers. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Important Safety Information

WARNING: Tip-Over Hazard. Furniture tip-overs can cause serious or fatal crushing injuries. To help prevent tip-over:

• Always use the anti-tipping devices provided with the product.
• Never allow children to climb or hang on drawers, doors, or shelves.
• Place the heaviest items in the lowest drawers.
• Do not place a television or other heavy objects on top of this product unless it is specifically designed to support them and is securely anchored. This TV stand is designed to support TVs up to 70 inches, but proper anchoring is crucial.

Failure to follow these warnings may result in death or serious injury.

Package Contents

Before assembly, please ensure all parts listed in the included parts list are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• Main frame components (steel and MDF panels)
• 16 fabric drawers with handles
• Power outlet unit with 5-foot power cord
• Adjustable feet
• Assembly hardware (screws, bolts, etc.)
• Anti-tipping accessories
• Assembly tools (usually an Allen wrench, screwdriver may be needed)

Assembly Instructions

Assembly of this TV stand requires careful attention to detail. It is recommended that two adults assemble this product. Please follow the step-by-step instructions provided in the separate assembly guide included in your package. Below are general guidelines and important considerations.

Tools Required (Not Included):

• Phillips head screwdriver
• Hammer (optional, for dowels if applicable)

General Assembly Steps:

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches. Identify each part using the provided parts list.
2. Assemble the Frame: Begin by connecting the steel frame components according to the diagrams in the assembly guide. Ensure all screws are tightened securely but do not overtighten.
3. Install MDF Panels: Attach the MDF top panel and any other structural MDF panels to the assembled frame.
4. Install Power Outlet: Secure the power outlet unit into its designated slot on the top panel. Ensure the power cord is routed safely and not pinched.
5. Insert Drawers: Assemble the fabric drawers by inserting the bottom panel and securing the handles. Slide the assembled drawers into their respective compartments.
6. Attach Adjustable Feet: Screw the adjustable feet into the bottom of the frame. Adjust them to ensure the TV stand is level and stable on your floor.
7. Secure Anti-Tipping Device: Crucial Safety Step: Attach the anti-tipping device to the back of the TV stand and securely fasten it to a wall stud using the provided hardware. This prevents accidental tip-overs.

Operating Instructions

Using the Power Outlets:

The Fixwal TV Stand is equipped with a built-in charging station for convenience. This unit includes:

• 2 AC Outlets (120V/12A)
• 2 USB Ports (5V/2A)
• A 5-foot power cord

To use, simply plug the TV stand's power cord into a standard wall outlet. You can then plug your television, media devices, and mobile devices into the integrated AC outlets and USB ports on the top surface of the stand.

Drawer Usage:

The 16 fabric drawers are designed for organized storage. They feature smooth-gliding mechanisms for easy opening and closing. Distribute weight evenly within the drawers to maintain stability and prevent strain on the drawer slides.

Maintenance

Proper care and maintenance will extend the life and appearance of your Fixwal TV Stand.

• Cleaning: Wipe the MDF surfaces with a dry cloth. For stubborn marks, a slightly damp cloth followed immediately by a dry cloth can be used. Avoid harsh chemicals or abrasive cleaners.
• Fabric Drawers: The fabric drawers can be spot cleaned with a mild detergent and a damp cloth. Allow to air dry completely. Do not machine wash or tumble dry.
• Hardware: Periodically check all screws and fasteners to ensure they remain tight. Retighten as necessary to maintain structural integrity.
• Leveling: Re-adjust the adjustable feet if the stand becomes uneven over time.
• Avoid Overloading: Do not exceed the maximum weight capacity of the top panel (165 LBS) or the total structure (396 LBS).

Troubleshooting

This section addresses common issues you might encounter with your TV stand.

Specifications

Warranty and Customer Support

For warranty information, replacement parts, or any questions regarding your Fixwal TV Stand, please contact Fixwal customer support directly. Refer to your purchase documentation for specific contact details or visit the official Fixwal website.

Please have your model number (TV Stand Dresser 5555) and purchase date available when contacting support.