Contigo Autospout Water Bottle with Straw (13 oz) Instruction Manual

1. Introduction

This manual provides instructions for the proper use and care of your Contigo Autospout Water Bottle with Straw. Designed for convenience and durability, this 13 oz stainless steel bottle features THERMALOCK™ vacuum insulation to keep drinks cold and an Easy-Clean Lid with a spill-proof valve for mess-free hydration. Please read these instructions carefully before first use and retain for future reference.

Image 1.1: Front view of the Contigo Autospout Water Bottle. This image shows the bottle's sleek design and the Contigo logo at the bottom.

2. Product Features

• THERMALOCK™ Vacuum Insulation: Keeps beverages cold for up to 14 hours.
• AUTOSPOUT® Technology: Press a button to open the pop-up straw for easy one-handed drinking.
• Spill-Proof Valve: Integrated into the straw to prevent spills even when the spout is open.
• Easy-Clean Lid: Designed to minimize nooks and crannies, making cleaning thorough and simple.
• Tethered Straw: Straw disassembles for cleaning but remains attached to the lid, preventing lost parts.
• Carrying Loop: Convenient for transport.
• BPA-Free: All components are 100% BPA-free.
• Recommended Age: Suitable for ages 3 and up.

3. Setup and Initial Use

1. Unpack: Remove all packaging materials and labels from the bottle.
2. Initial Cleaning: Before first use, wash all parts of the bottle according to the "Maintenance and Cleaning" section.
3. Assemble Straw: Ensure the straw is securely screwed into the cap.
4. Fill: Fill the bottle with your desired cold beverage. Do not overfill.
5. Secure Lid: Screw the lid on tightly to prevent leaks.

4. Operating Instructions

The Contigo Autospout Water Bottle is designed for easy, one-handed operation.

1. To Open Spout: Press the button located on the front of the lid. The straw will pop up automatically.
2. To Drink: Sip directly from the pop-up straw.
3. To Close Spout: Push the spout back down firmly until it clicks into place under the protective cover. This protects the mouthpiece and helps prevent spills.

Image 4.1: Angled view of the Contigo Autospout Water Bottle with the straw in the open position, ready for drinking.

Image 4.2: Angled view of the Contigo Autospout Water Bottle with the straw in the closed position, protected by the cover.

5. Maintenance and Cleaning

Proper cleaning ensures hygiene and extends the life of your water bottle.

Disassembly for Cleaning:

1. Unscrew the lid from the bottle.
2. The straw can be easily detached from the lid for thorough cleaning. It remains tethered to prevent loss.
3. The Easy-Clean Lid is designed to open fully for access to all internal components.

Image 5.1: View of the Contigo Autospout lid with the straw detached and the lid mechanism opened for comprehensive cleaning.

Cleaning Instructions:

• Lid: The lid is top-rack dishwasher-safe. Ensure all parts are fully open or disassembled for best cleaning results.
• Bottle Body: The stainless steel body should be hand-washed only. Use warm, soapy water and a bottle brush. Rinse thoroughly.
• Straw: Use a straw brush for thorough cleaning of the straw's interior.
• Drying: Allow all parts to dry completely before reassembly or storage to prevent mold and odors.

Reassembly:

1. Ensure all parts are dry.
2. Reattach the straw securely to the lid.
3. Close the lid mechanism.
4. Screw the lid onto the bottle body.

Important: Do not use abrasive cleaners, scrubbers, or bleach on any part of the bottle. Do not microwave or freeze the bottle.

6. Troubleshooting

• Leaking:
  • Ensure the lid is screwed on tightly and correctly aligned.
  • Verify the straw is securely attached to the lid.
  • Make sure the spout is fully closed and clicked into place.
  • Do not overfill the bottle beyond the maximum fill line (if present).
• Difficulty Drinking from Straw:
  • Ensure the straw is fully extended and the spout is open.
  • Check for any blockages in the straw or vent. Clean thoroughly if necessary.

7. Specifications

8. Safety Information

• Not intended for use with hot liquids. Hot liquids may create internal pressure, causing the spout to open unexpectedly and spray hot contents.
• Not for use with carbonated beverages, as this can also create pressure and cause leaks.
• Always ensure the lid is securely fastened before use.
• Keep out of reach of children under 3 years of age due to small parts (straw components) that could pose a choking hazard if detached.
• Do not chew on the straw, as this may damage it and affect its functionality.

9. Warranty and Support

Contigo products are engineered for your life. This product comes with a lifetime guarantee against manufacturing defects. For warranty claims, product support, or to purchase replacement parts, please visit the official Contigo website or contact their customer service department. Please have your model number (2198478) available when contacting support.

For more information, visit: Contigo Official Store on Amazon