Modern Ember Raeford Electric Fireplace Mantel - Instruction Manual

Introduction

The Modern Ember Raeford Electric Fireplace Mantel provides realistic flame effects and efficient heating for spaces up to 1,000 sq. ft. This manual provides essential information for safe and effective use of your electric fireplace. Please read and understand all instructions before operating.

Safety Information

Please read and understand this entire manual before attempting to assemble, operate, or install this product. Failure to do so could result in fire, electric shock, or serious personal injury. Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury to persons.

• Do not operate any fireplace with a damaged cord or plug, or after the heater malfunctions, has been dropped or damaged in any manner.
• Do not use outdoors.
• Avoid placing the fireplace near curtains, furniture, or other combustible materials.
• Ensure the power outlet is properly grounded.
• Keep children and pets away from the fireplace when it is operating.
• Do not cover the heater or block the air vents.
• The built-in safety plug monitors temperature to prevent electrical hazards.

Package Contents

Verify that all components are present and undamaged before assembly.

• Electric Firebox
• Mantel Surround (Faux Stone and Wood components)
• Remote Control
• Assembly Hardware
• Instruction Manual

Setup and Assembly

The Modern Ember Raeford Electric Fireplace Mantel is designed for easy DIY assembly, typically involving only 9 main pieces. While assembly is straightforward, it is recommended to have two people for handling the heavier components.

1. Unpacking: Carefully remove all components from the packaging. Inspect for any damage.
2. Initial Assembly: Begin by assembling the base and side panels of the mantel. It is crucial to keep screws slightly loose until all pieces are aligned, then tighten them securely.
3. Firebox Insertion: Gently slide the electric firebox into the designated opening within the mantel structure.
4. Mantel Top Placement: Position the wooden mantel shelf on top of the assembled structure.
5. Final Tightening: Once all components are in place and aligned, securely tighten all screws.
6. Placement: Position the assembled fireplace against a wall, ensuring adequate clearance from combustible materials. The design allows for close placement to the wall without interfering with cords.
7. Power Connection: Plug the fireplace into a standard, properly grounded electrical outlet.

Figure 1: Easy DIY Assembly - The fireplace mantel consists of only 9 pieces, making assembly beginner-friendly. Dimensions are 40"W x 39"H x 11.5"D.

Operating Instructions

The Modern Ember Raeford Electric Fireplace Mantel can be operated using the included multi-function remote control or the digital control panel located on the unit.

Power On/Off

• Remote Control: Press the red power button to turn the unit on or off.
• Control Panel: Press the power button on the digital control panel.

Flame Effects

Customize the ambiance with various flame settings.

• Flame Color: Select from 2 flame colors (orange, or orange & blue) using the remote or control panel.
• Brightness Levels: Adjust the flame brightness with 6 available levels to suit your preference.
• Flame Speed: Modify the speed of the flame effect for a more dynamic or subtle display.

Figure 2: Customizable Flame Effects - Choose from 2 flame colors and 6 brightness levels. Features a realistic glowing log set and ember bed, equipped with Safer Plug™ technology.

Heating Functions

The 18-inch electric fireplace insert provides efficient supplemental heating.

• Temperature Control: Set the thermostat between 62-82°F (17-28°C) using the remote or control panel. The heater will automatically turn off once the desired temperature is reached.
• Heat-Free Mode: Enjoy the flame effects without heat for year-round ambiance.
• Heating Coverage: Heats rooms up to 1,000 sq. ft.

Figure 3: Year-Round Ambiance - The fireplace offers adjustable heat settings from 62°F to 82°F and timer settings from 30 minutes to 9 hours, perfect for any season.

Timer Function

• Set a timer for continuous use, ranging from 30 minutes up to 9 hours.

Control Methods

Figure 4: Multi-Function Remote Control - Easily adjust power, flame, heater, and timer settings from a distance.

Figure 5: Digital Control Panel - Directly change settings on the unit using the integrated control panel.

Maintenance

Regular maintenance ensures optimal performance and longevity of your electric fireplace.

• Cleaning: Ensure the unit is turned off and unplugged before cleaning. Use a soft, damp cloth to wipe down surfaces. Avoid abrasive cleaners.
• Ventilation: Keep the air intake and exhaust vents clear of dust and debris to prevent overheating.
• Storage: If storing the unit for an extended period, ensure it is clean, dry, and stored in a safe location.

Troubleshooting

If you encounter issues with your fireplace, refer to the following common solutions:

• No Power: Check if the power cord is securely plugged into a grounded outlet. Verify the outlet is functional. Check the circuit breaker.
• No Heat: Ensure the heater function is activated. Check the thermostat setting; if the room temperature is above the set temperature, the heater will not activate.
• Flames Not Visible: Adjust the flame brightness settings. Ensure the flame effect is turned on.
• Remote Not Working: Check and replace batteries in the remote control. Ensure there are no obstructions between the remote and the fireplace sensor.
• Unusual Noises: A slight fan noise is normal during heating operation. If unusual or loud noises occur, discontinue use and contact customer support.

Specifications

Warranty & Support

This Modern Ember product comes with a Limited Warranty. For detailed warranty information, please refer to the documentation included with your purchase or visit the official Modern Ember website.

For technical assistance, troubleshooting, or to order replacement parts, please contact Modern Ember Customer Support. Contact information can typically be found on the manufacturer's website or in your product packaging.