ASUS XG32WCS

Download PDF
Contents

ASUS ROG Strix XG32WCS 32-inch 1440P USB-C Curved HDR Gaming Monitor User Manual

Model: XG32WCS

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your ASUS ROG Strix XG32WCS 32-inch 1440P USB-C Curved HDR Gaming Monitor. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

ASUS ROG Strix XG32WCS 32-inch Curved HDR Gaming Monitor

Figure 1.1: Front view of the ASUS ROG Strix XG32WCS monitor.

2. Safety Information

Observe the following safety precautions to prevent damage to the monitor and to ensure your personal safety:

  • Always disconnect the power cord from the electrical outlet before cleaning or servicing the monitor.
  • Do not expose the monitor to rain or moisture to avoid fire or shock hazards.
  • Never open the monitor casing. Dangerous high voltages are present inside.
  • Place the monitor on a stable, flat surface to prevent it from falling.
  • Ensure proper ventilation around the monitor. Do not block ventilation openings.
  • Use only the power adapter and cables supplied with the monitor.

3. What's in the Box

Verify that all items are present in the package:

  • XG32WCS Gaming Monitor
  • DisplayPort cable
  • Power cord
  • Quick start guide
  • ROG pouch
Contents of the ASUS ROG Strix XG32WCS monitor box including monitor, cables, and documentation.

Figure 3.1: Included accessories and monitor in the retail package.

4. Setup

4.1 Assembling the Stand

  1. Place the monitor panel face down on a soft, clean surface to prevent scratches.
  2. Attach the stand base to the stand neck, securing it with the provided screw.
  3. Align the stand assembly with the mounting holes on the back of the monitor panel and firmly attach it.

4.2 Connecting Cables

Connect the necessary cables to the monitor and your computer:

  • Power Cable: Connect the power cord to the monitor's power input and then to a power outlet.
  • Video Input: Connect either a DisplayPort, HDMI, or USB-C cable from your computer's graphics card to the corresponding port on the monitor.
  • USB-C (if applicable): For devices supporting USB-C video output and power delivery, use a USB-C cable.
Rear view of the ASUS ROG Strix XG32WCS monitor showing various input ports including USB-C, DisplayPort, and HDMI.

Figure 4.1: Monitor connectivity ports.

4.3 Initial Power-On

Press the power button located on the monitor to turn it on. The monitor will automatically detect the active input source. If no signal is detected, ensure all cables are securely connected and your computer is powered on.

5. Operating the Monitor

5.1 On-Screen Display (OSD) Navigation

The monitor features an intuitive OSD menu for adjusting various settings. Use the joystick and buttons located on the back or bottom of the monitor to navigate the menu.

  • Joystick: Push to enter the OSD menu, move up/down/left/right to navigate.
  • Buttons: Typically used for quick access to specific functions or confirming selections.
Screenshot of the ASUS DisplayWidget Center software showing various monitor settings like GameVisual modes, brightness, contrast, and color temperature.

Figure 5.1: DisplayWidget Center for effortless settings customization.

5.2 Key Features and Settings

  • Refresh Rate (180Hz): Ensures smooth motion in fast-paced games. Adjust this setting in your operating system's display settings.
  • Response Time (1ms Fast VA): Minimizes motion blur for sharp visuals. This is a hardware feature.
  • HDR (High Dynamic Range): Provides enhanced contrast and color depth. Enable HDR in your operating system's display settings.
  • ELMB Sync (Extreme Low Motion Blur Sync): Reduces motion blur and ghosting while maintaining variable refresh rates. Can be enabled via the OSD.
  • FreeSync: Synchronizes the monitor's refresh rate with your GPU's frame rate to eliminate screen tearing and stuttering. Ensure your graphics card supports AMD FreeSync and enable it in both the OSD and your GPU's control panel.
  • DisplayWidget Center: Software utility for easy adjustment of monitor settings via mouse.
  • AI Technology (Dynamic Crosshair, Dynamic Shadow Boost): Enhances gaming experience. Dynamic Crosshair provides an on-screen crosshair, and Dynamic Shadow Boost brightens dark areas without overexposing bright ones. These features are accessible through the OSD or DisplayWidget Center.
Comparison images showing 'Before' and 'After' effects of Dynamic Crosshair and Dynamic Shadow Boost features in a game, highlighting improved visibility and targeting.

Figure 5.2: AI-Powered Advantage features in action.

5.3 Ergonomic Adjustments

The monitor stand allows for various adjustments to optimize your viewing comfort:

  • Tilt: Adjust the screen's vertical angle.
  • Swivel: Rotate the screen horizontally.
  • Height Adjustment: Raise or lower the screen to eye level.
Diagram showing the ergonomic adjustments of the ASUS ROG Strix XG32WCS monitor, including height, tilt, and swivel capabilities.

Figure 5.3: Ergonomic design and adjustment ranges.

5.4 Official Product Videos

Watch the official product videos for a visual guide on features and usage:

Video 5.4.1: XGS Promo Video. This video highlights the key features and design of the ROG Strix XG32WCS monitor.

Video 5.4.2: ASUS Eyecare with Disclaimer. This video demonstrates ASUS Eye Care technologies, including anti-glare, blue light filter, and flicker-free features, designed to reduce eye strain.

6. Maintenance

6.1 Cleaning the Monitor

  • Always unplug the monitor before cleaning.
  • Use a soft, lint-free cloth lightly dampened with water or a mild, non-abrasive cleaner specifically designed for screens.
  • Do not spray cleaner directly onto the screen.
  • Avoid using alcohol, ammonia, or abrasive cleaners, as they can damage the screen surface.

6.2 General Care

  • Keep the monitor away from direct sunlight and heat sources.
  • Avoid placing heavy objects on the monitor or its cables.
  • Do not expose the monitor to extreme temperatures or humidity.

7. Troubleshooting

If you encounter issues with your monitor, refer to the following common problems and solutions:

ProblemPossible Solution
No powerEnsure the power cord is securely connected to the monitor and a working electrical outlet. Check the power adapter.
No image on screenVerify that the video cable (DisplayPort, HDMI, or USB-C) is correctly connected to both the monitor and your computer. Ensure the correct input source is selected in the OSD.
Image is blurry or distortedCheck the display resolution and refresh rate settings on your computer. Ensure they match the monitor's native resolution (2560x1440) and desired refresh rate (up to 180Hz).
Screen tearing or stutteringEnable FreeSync in both the monitor's OSD and your graphics card's control panel. Ensure your graphics card drivers are up to date.
Colors appear incorrectAdjust color settings in the OSD menu. Consider performing a color calibration if available.

8. Specifications

FeatureDetail
Screen Size31.5 Inches
Screen Resolution2560 x 1440 (QHD)
Max Refresh Rate180Hz
Response Time1ms (GTG)
Panel TypeFast VA
CurvatureCurved
HDR SupportYes
Color Gamut90% DCI-P3
Adaptive SyncFreeSync
ConnectivityUSB-C, DisplayPort 1.4, HDMI
ErgonomicsTilt, Swivel, Height Adjustment
Dimensions (LxWxH)9.7 x 27.9 x 22.6 inches
Weight20.7 pounds

9. Warranty and Support

9.1 Warranty Information

Your ASUS ROG Strix XG32WCS monitor comes with a 3-year limited warranty. This warranty covers manufacturing defects and hardware malfunctions under normal use. Please retain your proof of purchase for warranty claims.

9.2 Technical Support

For technical assistance, troubleshooting, or warranty inquiries, please visit the official ASUS support website or contact ASUS customer service. You can find detailed support information and contact options at www.asus.com/support/.

© 2024 ASUS. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.