Introduction
Thank you for choosing the Arcadia Electric Turkish, Black and Herbal Tea Maker and Kettle. This versatile appliance is designed to provide an authentic tea brewing experience with modern convenience. Crafted from 304-grade stainless steel, it ensures durability and purity for every brew. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to help you get the most out of your new tea maker.
Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
- Read all instructions before using the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or the appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- The appliance is equipped with automatic shut-off functionality and boil-dry protection for enhanced safety.
Components
The Arcadia Tea Maker consists of several key components designed for optimal tea brewing:
- Kettle (Lower Pot): Main water heating unit with a 1.7-liter capacity. Features a temperature gauge and water level indicator.
- Teapot (Upper Pot): Designed for brewing tea, with a 1.0-liter capacity. Sits atop the kettle.
- Removable Stainless Steel Infuser: For steeping loose tea leaves.
- Lids: One lid for the teapot and a second lid for the kettle, allowing it to function as a standalone unit.
- Power Base: Connects to the electrical outlet and provides power to the kettle.
- Handle with LED Display: Located on the kettle, this display shows temperature and provides controls for boiling and keep-warm functions.
Image: Exploded view showing the kettle, teapot, infuser, and power base.
Setup
Follow these steps to set up your Arcadia Tea Maker for first use:
- Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Clean: Before first use, wash the teapot, infuser, and the interior of the kettle with warm, soapy water. Rinse thoroughly and dry. Wipe the exterior of the kettle and power base with a damp cloth. Do not immerse the power base or the exterior of the kettle in water.
- Place Power Base: Place the power base on a stable, flat, heat-resistant surface near a power outlet. Ensure the cord is not dangling where it can be pulled or tripped over.
- Fill Kettle: Fill the kettle with fresh, cold water. Do not exceed the 'MAX' fill line (1.7L) indicated on the water level indicator.
- Place Kettle: Place the filled kettle securely onto the power base.
- Insert Infuser (Optional): If brewing loose leaf tea, place the removable stainless steel infuser into the teapot.
- Assemble Teapot: Place the teapot on top of the kettle. Ensure it is seated correctly.
- Plug In: Plug the power cord into a standard 120V electrical outlet.
Image: The Arcadia Tea Maker fully assembled, showing the kettle and teapot stacked.
Operating Instructions
The Arcadia Tea Maker offers precise temperature control for various tea types.
Boiling Water
- Ensure the kettle is filled with water and placed on the power base.
- Press the power button (⏻) on the handle's LED display to turn on the unit.
- Use the '+' and '-' buttons to adjust the desired boiling temperature. The LED display will show the selected temperature. The temperature gauge on the main body provides an analog reading.
- The kettle will begin heating. Once the set temperature is reached, the unit will automatically shut off.
Brewing Tea
- Boil water in the kettle to the desired temperature according to your tea type. Refer to the tea steeping guide below.
- Add your preferred loose tea leaves to the removable stainless steel infuser. For Turkish tea, use approximately 2-3 tablespoons of black tea for the 1.0L teapot.
- Place the infuser into the teapot and then place the teapot on top of the kettle.
- Pour a small amount of the hot water from the kettle into the teapot, just enough to cover the tea leaves. Let it steep for 1-2 minutes to 'bloom' the tea.
- Fill the rest of the teapot with hot water from the kettle.
- Allow the tea to steep for the recommended time. The kettle can be set to a 'Keep Warm' temperature (40-90°C / 104-194°F) to maintain the water temperature while the tea brews. Press the 'Keep Warm' button (SSS) on the handle to activate this function and adjust the temperature with '+' and '-' buttons.
- Once steeped, pour the concentrated tea from the teapot into your serving glass, then dilute with hot water from the kettle to your desired strength.
Tea Steeping Guide
| Tea Type | Temperature | Steeping Time |
|---|---|---|
| White Tea | 65-70°C (149-158°F) | 1-3 min |
| Yellow Tea | 70-75°C (158-167°F) | 1-2 min |
| Green Tea | 75-80°C (167-176°F) | 1-3 min |
| Oolong Tea | 80-85°C (176-185°F) | 2-3 min |
| Black / Turkish Tea | 99°C (210°F) | 3-5 min |
| Herbal Tea | 99°C (210°F) | 3-5 min |
Image: Close-up of the LED display on the handle, showing temperature settings and control buttons.
Image: The LED display on the handle, accompanied by a visual guide for optimal tea steeping temperatures and times for various tea types.
Image: A detailed view of the analog temperature dial located on the main body of the kettle, displaying temperature in both Celsius and Fahrenheit.
Using as a Standalone Kettle
The lower pot can be used independently as a kettle. Simply remove the teapot and place the second lid (included) directly onto the kettle. This allows for quick boiling of water for other uses.
Video: A demonstration of the Arcadia Electric Turkish and Herbal Tea Maker in use, highlighting its adjustable temperature settings and the process of brewing tea.
Maintenance and Cleaning
Proper care ensures the longevity and performance of your Arcadia Tea Maker.
- Daily Cleaning: After each use, unplug the unit and allow it to cool completely. Hand wash the teapot, infuser, and the interior of the kettle with warm, soapy water. Rinse thoroughly.
- Exterior Cleaning: Wipe the exterior of the kettle and the power base with a soft, damp cloth. Do not use abrasive cleaners or scouring pads, as they may damage the finish.
- Descaling: Over time, mineral deposits (limescale) may build up inside the kettle, especially in hard water areas. To descale, fill the kettle with a mixture of equal parts water and white vinegar. Let it sit for at least 30 minutes, or boil the mixture for 5-10 minutes for heavy buildup. Rinse thoroughly several times with fresh water to remove any vinegar residue.
- Storage: When not in use, ensure the tea maker is clean and dry. Store it in a cool, dry place.
Troubleshooting
If you encounter any issues with your Arcadia Tea Maker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Tea maker does not turn on. | Not plugged in; power outlet issue; unit not properly seated on base. | Ensure the unit is securely plugged into a working outlet. Check if the kettle is correctly placed on the power base. |
| Water is not heating. | Unit not turned on; insufficient water; boil-dry protection activated. | Press the power button. Ensure water level is above the minimum mark. If boil-dry protection activated, unplug, let cool, then refill and restart. |
| Tea tastes weak or too strong. | Incorrect tea-to-water ratio; incorrect steeping time/temperature. | Adjust the amount of tea leaves, steeping time, or water temperature according to the Tea Steeping Guide. |
| Limescale buildup inside kettle. | Mineral deposits from water. | Perform descaling as described in the Maintenance and Cleaning section. |
Specifications
- Model Name: Arcadia
- Model Number: ARC101A
- Color: Black
- Material: 304-grade Stainless Steel
- Kettle Capacity: 1.7 Liters (1.5 Quarts)
- Teapot Capacity: 1.0 Liter
- Power: 1500W
- Voltage: 120V
- Frequency: 60Hz
- Product Dimensions: 6"L x 6"W x 15"H
- Item Weight: 4.09 pounds
- Special Features: Adjustable temperature control, LED and dial display, Auto shut-off, Boil-dry protection, Removable infuser, Keep warm function (40-90°C / 104-194°F).
- Country of Origin: China
Warranty and Support
The Arcadia Electric Turkish, Black and Herbal Tea Maker and Kettle comes with a 1-year manufacturer's warranty, covering any potential manufacturing defects for a worry-free experience.
For technical support, warranty claims, or any questions regarding your product, please contact Arcadia customer service through the retailer's platform or visit the official Arcadia website for contact information.
