Introduction
This manual provides essential information for the safe and effective use of your Hawk Office Hunting Box Blind with 10ft Elite Tower. The Hawk Office Box Blind is designed for durability and performance, featuring steel construction, insulated panels, and sound-deadening properties. Please read these instructions thoroughly before setup and operation.
Image: The Hawk Office Hunting Box Blind mounted on its 10ft Elite Tower, showcasing the complete assembly.
Setup and Assembly
The Hawk Office Box Blind is delivered fully assembled and field-ready. The primary setup involves securing the blind to the 10ft Elite Tower and positioning the entire unit.
Tower Assembly and Placement:
- Ensure the 10ft Elite Tower is assembled according to its specific instructions (if provided separately). The tower is constructed from heavy-duty powder-coated steel.
- Select a stable, level location for the blind and tower.
- Secure the tower to the ground using the provided leg stakes to prevent tipping.
- Carefully lift and secure the assembled box blind onto the tower platform. Professional assistance and appropriate lifting equipment (e.g., forklift) are recommended due to the blind's weight (450 lbs).
Image: The Hawk Office Box Blind being carefully positioned with a forklift, illustrating the need for proper equipment during setup.
Image: Diagram showing the dimensions of the 10ft Elite Tower, including its 10-foot height and 8'2" base width.
Video: Hawk Office Hunting Box Blind Features
Video: This video demonstrates various features of the Hawk Office Hunting Box Blind, including its construction and window operation, which can aid in understanding its setup and use.
Operating Instructions
Window Operation:
- The blind features one-hand-operable silent windows made of residential glass.
- To open or close a window, use a single hand to manipulate the latch mechanism. The design ensures quiet operation to minimize disturbance.
- The window frames are roto-molded with eaves to direct water away, keeping the interior dry.
Image: A hunter observing through one of the silent, one-hand-operable windows of the blind.
Interior Features:
- The insulated steel panels and floor provide thermal, scent, and noise control.
- The high-density rubber pad on the floor is sound-deadening, reducing noise from movement or dropped gear.
- The spacious interior accommodates hunters comfortably, allowing for various shooting positions, including bow hunting.
Image: A hunter inside the blind, demonstrating the ample space for bow hunting through the large windows.
Image: Two hunters comfortably situated inside the blind, illustrating the interior capacity.
Maintenance
Regular maintenance ensures the longevity and performance of your Hawk Office Hunting Box Blind.
- Cleaning: Clean the interior and exterior surfaces with a mild soap and water solution. Avoid abrasive cleaners that could damage the finish or window glass.
- Window Care: Keep residential glass windows clean for clear visibility. Inspect window seals periodically for any signs of wear or damage.
- Structural Inspection: Annually inspect all steel components, including the blind's frame, panels, floor, and the tower structure, for any signs of rust, damage, or loose fasteners. Address any issues promptly to maintain structural integrity.
- Floor Pad: Ensure the high-density rubber floor pad remains in place and free of debris to maintain its sound-deadening properties.
- Tower Stability: Regularly check the stability of the tower and the security of the leg stakes, especially after severe weather conditions.
Troubleshooting
This section addresses common issues you might encounter.
- Window Sticking/Difficulty Operating:
- Inspect the window tracks and latch mechanisms for dirt, debris, or obstructions. Clean as necessary.
- Apply a silicone-based lubricant to moving parts if friction is present.
- Unusual Noise:
- Check for loose components on the blind or tower. Tighten any fasteners.
- Ensure the floor pad is properly seated and not allowing direct contact between gear and the steel floor.
- Water Leakage:
- Inspect window seals and the roof for any cracks or gaps. Apply appropriate sealant if needed.
- Ensure the blind is level to prevent water pooling.
For issues not covered here or if problems persist, please contact Hawk customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Name | Office Hunting 6.55' W x 6.5' D x 6.5' T Assembled Insulated Steel Box Blind |
| Model Number | HWK-BBB5000-10C |
| Brand | Hawk |
| Blind Dimensions (W x D x T) | 6.55' x 6.5' x 6.5' (78.6" W x 78" D x 78" T) |
| Blind Weight | 450 lbs |
| Tower Height | 10 ft (Elite Tower) |
| Overall Item Dimensions (LxWxH) | 73 x 73 x 90 inches (Blind on Tower) |
| Overall Item Weight | 500 Pounds (Blind + Tower) |
| Material | Steel (Insulated panels, powder-coated floor), Residential Glass (windows), High-density Rubber (floor pad) |
| Insulation R-value (Panels) | 7 |
| Insulation R-value (Floor) | 8 |
| Door Dimensions (W x T) | 30" x 70" |
| Horizontal Window Dimensions (W x T) | 33" x 13" |
| Vertical Window Dimensions (W x T) | 12" x 42" |
| Vertical Door Window Dimensions (W x T) | 12" x 42" |
| Included Components | HAWK THE OFFICE BLIND w/ 10ft Elite Tower |
Warranty Information
Specific warranty details for the Hawk Office Hunting Box Blind and 10ft Elite Tower are provided by the manufacturer. Please refer to the official Hawk website or the documentation included with your purchase for comprehensive warranty terms and conditions.
Support
For technical assistance, replacement parts, or further inquiries regarding your Hawk Office Hunting Box Blind, please contact GSM Outdoors, the manufacturer.
- Manufacturer: GSM Outdoors
- Visit the official Hawk website for contact information and support resources.