Simplicity Misses' Lined Corsets Sewing Pattern Manual S9974

Introduction

This manual provides detailed guidance for using the Simplicity Misses' Lined Corsets Sewing Pattern, Design Code S9974. This pattern allows you to create elegant lined corsets with steel boning, featuring back lacing, grommets, and various shoulder strap options. The pattern includes designs for a waist-length corset and a long-line corset with a basque waistline, suitable for sizes 18-20-22-24-26.

Image: Front of the Simplicity S9974 sewing pattern packet, displaying two finished corset designs. One is a waist-length corset with a ruffled blouse and a full skirt, and the other is a long-line corset with a white skirt.

Setup and Preparation

Before beginning your sewing project, it is crucial to prepare your materials and understand the pattern components. This section outlines the necessary steps to ensure a smooth start.

1. Pattern Packet Contents

Your Simplicity pattern kit includes comprehensive sewing templates, detailed sizing information, individual pattern pieces, and step-by-step instructions. It also provides guidance on selecting appropriate fabrics and trims, along with specific recommendations.

2. Sizing Information

This pattern is designed to fit Misses' sizes 18-20-22-24-26. Refer to the sizing chart provided within the pattern packet to select the correct size for your measurements. Finished garment measurements are also included for reference.

Image: Back of the Simplicity S9974 pattern envelope, detailing suggested fabrics, required notions, and a comprehensive sizing chart for Misses' sizes.

3. Fabric and Notions Selection

Careful selection of fabrics and notions is essential for the success of your corset. The pattern recommends the following:

• Suggested Fabrics: Brocade, cotton types, linen types, satin, silk shantung, velvet.
• Contrast B, C (Skirt/Binding C): Also in chiffon, crepe de chine, double georgette.
• Interlining: Coutil (recommended for structural integrity).
• Lining: Broadcloth, lining fabric.
• Notions:
  • 1/4" (6mm) flat rigid steel boning (2 yds. / 2.5m)
  • 1/4" (1cm) flat lacing cord (20 grommets with a 5mm opening)
  • Fray Check® (optional)
  • 3/16" (5mm) flat spiral (flexible) steel boning (4.5 yds. / 3.8m for A, 4.5 yds. / 4.5m for B,C)
  • 3/8" (1cm - 1.3cm) twill tape (3.5 yds. / 3.2m for A, 4.5 yds. / 4.1m for B,C)
  • 1/4" (6mm) twisted cord (3 yds. / 2.9m for A, 4 yds. / 3.7m for B,C)
  • 1/8" (3mm) corded trim (1 yd. / 0.9m for B,C)
  • One 7" (18cm) invisible zipper (for long line corset C)
  • One hook and eye
  • Four 3/8" - 1/2" (1cm - 1.3cm) cord ends (for twisted cord, optional)

Ensure you have all required materials before cutting your fabric.

4. Sew-Along Tutorial

For additional visual guidance, a sew-along tutorial by Maddie Kulig is available. Scan the QR code on the pattern packet or visit the provided link for step-by-step video instructions.

Official Sew-Along Tutorial: https://qrcodes.pro/2qNVH9

Operating (Sewing Instructions)

This pattern offers two distinct corset designs, each with unique features. Follow the detailed instructions provided within your pattern packet for cutting, marking, and assembling your garment.

1. Corset A: Waist-Length Corset

Corset A is a waist-length design featuring a slightly rounded basque front. It is finished with bias binding and includes steel boning for structure. The back closure utilizes lacing through grommets, and shoulder straps are tied on with corded trim or ribbon.

Image: Close-up view of Corset A, showcasing its floral patterned fabric, ribbon shoulder ties, and structured design.

2. Corset B & C: Long-Line Corsets

The long-line corsets (B and C) feature a basque waistline and include a contrast-lined skirt. They are finished with matching or contrast binding. Corset C specifically includes a back invisible zipper and corded trim embellishments. Both designs incorporate steel boning and back lacing with grommets, and shoulder straps tied with corded trim or ribbon.

Image: Model wearing Corset B, a long-line corset with a light-colored, full skirt, paired with a white ruffled blouse.

Image: Model wearing Corset C, a long-line corset with a white, full skirt, showcasing the design's silhouette.

Image: Detailed close-up of the corset's back lacing, showing the grommets and the ribbon threaded through them.

3. Pattern Diagrams

The pattern packet includes detailed line drawings for each corset view, illustrating the front and back construction. These diagrams are essential for understanding the garment's structure and assembly.

Image: Technical line drawings of Corset A, B, and C from the Simplicity S9974 pattern, illustrating the front and back views of each design.

Maintenance of Finished Garments

Proper care of your finished corset will ensure its longevity and maintain its shape. Due to the inclusion of steel boning and various fabric types, specific care instructions are recommended:

• Cleaning: Dry cleaning is generally recommended for corsets with steel boning and delicate fabrics like brocade, satin, or velvet to prevent damage to the boning and preserve fabric integrity. If hand washing is necessary for specific fabrics, remove boning if possible and use cold water with a mild detergent, then air dry flat.
• Storage: Store your corset flat or hung carefully to prevent distortion of the boning. Avoid folding or crushing the corset for extended periods.
• Ironing: Use a low to medium heat setting and iron on the reverse side of the fabric, or use a pressing cloth, especially for delicate materials. Avoid direct heat on boning or grommets.

Troubleshooting Common Sewing Issues

While the Simplicity pattern provides clear instructions, common sewing challenges can arise. Here are some tips for troubleshooting:

• Fit Issues: Always create a muslin (test garment) before cutting into your final fabric. This allows you to make necessary adjustments to the pattern pieces for a perfect fit, especially crucial for corsets.
• Fabric Handling: If working with slippery fabrics like satin or shantung, use sharp pins, a walking foot, and a new needle. Consider using temporary spray adhesive or basting to keep layers aligned.
• Grommet Application: Ensure you use the correct tools for applying grommets. Practice on scrap fabric first to achieve a secure and neat application.
• Boning Insertion: If boning is difficult to insert, ensure your boning channels are wide enough and that the ends of the boning are properly capped or rounded to prevent snagging.
• Lacing: For smooth lacing, ensure grommets are evenly spaced and securely set. Use a lacing cord that is durable and appropriate for the grommet size.

Specifications

Support and Contact

For any questions regarding your Simplicity sewing pattern, including missing pieces or clarification on instructions, please contact Simplicity customer support. You can often find contact information on the pattern envelope or by visiting the official Simplicity website.

Visit the Simplicity Store on Amazon: Simplicity Store